Update the docs and add AGENTS.md

The new Cheats tab exposes the engine's own cheat handlers as buttons:
give all items and weapons, toggle physics, next level and previous
level. Physics shows its state through the button highlight. The buttons
need a running game and show a message otherwise.

It also has four independent session-only switches for unlimited health,
energy, ammo and items (grenades and drugs). While a switch is on, its
resource is topped up every frame by qs_cheat_refill() from the new
engine patch 26. The switches are not saved to the config.

.gitattributes

@@ -0,0 +1,2 @@
+* text=auto
+*.sh text eol=lf

.gitea/workflows/build.yml

@@ -1,14 +1,16 @@
 name: build
 
-# Builds a versioned Linux release tarball (see `make package`) on every
-# push/PR, plus on-demand via the Gitea "Run workflow" button. Runs
+# Builds versioned Linux and Windows release packages (see `make
+# package`, which builds both - a .tar.gz and a .zip) on every push/PR,
+# plus on-demand via the Gitea "Run workflow" button. Runs
 # inside the build-image (see ../../build-image/Dockerfile, built/pushed
 # via ../../build-image.sh and ../../upload-image.sh), which bundles
-# every dependency engine/ needs to compile - no network access needed
-# at job runtime. Since the job's container already *is* the build-image
-# (QUESTSHOCK_BUILD_IMAGE=1), `make package`'s `engine` prerequisite
-# compiles directly instead of trying to docker-run it again, which
-# wouldn't work here (no nested docker).
+# every dependency engine/ needs to compile (for both platforms,
+# including the Windows cross-toolchain) - no network access needed at
+# job runtime. Since the job's container already *is* the build-image
+# (QUESTSHOCK_BUILD_IMAGE=1), `make package`'s `engine`/`engine-win`
+# prerequisites compile directly instead of trying to docker-run it
+# again, which wouldn't work here (no nested docker).
 on:
   push:
   pull_request:
@@ -50,17 +52,22 @@ jobs:
           # comment) - openxr was added to this image in the same
           # Android/Quest layer, so it's an equally good marker of that.
           [ -d /opt/prebuilt/android/openxr ] || { echo "PREFLIGHT FAIL: /opt/prebuilt/android/openxr missing - runner is using a build-image older than the Android/Quest layer" >&2; exit 1; }
+          [ -d /opt/prebuilt/win/sdl2 ] || { echo "PREFLIGHT FAIL: /opt/prebuilt/win/sdl2 missing - runner is using a build-image older than the Windows cross-build layer" >&2; exit 1; }
+          command -v x86_64-w64-mingw32-gcc >/dev/null 2>&1 || { echo "PREFLIGHT FAIL: x86_64-w64-mingw32-gcc not in PATH" >&2; exit 1; }
+          command -v zip >/dev/null 2>&1 || { echo "PREFLIGHT FAIL: zip not in PATH (needed by make package-win)" >&2; exit 1; }
 
       - name: Build package
         run: make package
 
-      - name: Upload build artifact
+      - name: Upload build artifacts
         # v4 uses the newer @actions/artifact backend, which this Gitea
         # instance's artifact storage doesn't support (GHESNotSupportedError) - v3 works.
         uses: actions/upload-artifact@v3
         with:
           name: shockolate
-          path: dist/shockolate-*-linux-*.tar.gz
+          path: |
+            dist/shockolate-*-linux-*.tar.gz
+            dist/shockolate-*-windows-*.zip
 
       - name: Build Quest APK
         # QUESTSHOCK_BUILD_IMAGE is already set (see Preflight above), so
@@ -78,13 +85,14 @@ jobs:
           path: dist/questshock-*-android-*.apk
 
       - name: Publish to dl.ladkau.de
-        # Uploads the tarball and APK over SFTP instead of using
+        # Uploads the tarball, zip, and APK over SFTP instead of using
         # actions/upload-artifact (whose zip wrapping can't be disabled).
         # Only runs on push so PR builds don't publish.
         if: gitea.event_name == 'push'
         run: |
           set -euo pipefail
           TARBALL="$(ls dist/shockolate-*-linux-*.tar.gz)"
+          ZIP="$(ls dist/shockolate-*-windows-*.zip)"
           APK="$(ls dist/questshock-*-android-*.apk)"
           mkdir -p ~/.ssh
           echo "${{ secrets.DL_SFTP_KEY }}" > ~/.ssh/dl_sftp_key
@@ -94,5 +102,6 @@ jobs:
             uploader@dl.ladkau.de <<EOF
           -mkdir files/questshock
           put $TARBALL files/questshock/$(basename "$TARBALL")
+          put $ZIP files/questshock/$(basename "$ZIP")
           put $APK files/questshock/$(basename "$APK")
           EOF

.gitignore

@@ -3,16 +3,22 @@
 
 # Game assets are not included in the repo
 /res/assets/setup_system_shock_enhanced*
+/res/assets/setup_system_shock_classic*
+/res/assets/*.zip
 /res/assets/ss_ee/
 
 # Build output
 /dist/
+/dist-win/
 /build/
 
 # Engine build artifacts (engine/ is committed as a source snapshot; these
-# are generated by run-image.sh / build-image/build-engine.sh)
+# are generated by run-image.sh / build-image/build-engine.sh /
+# build-image/build-engine-win.sh - the Windows cross-build's own scratch
+# copy of engine/ lives under /build/win-engine/, already covered above)
 /engine/build_ext/
 /engine/.build-output/
+/engine/.build-output-win/
 /engine/CMakeCache.txt
 /engine/CMakeFiles/
 /engine/cmake_install.cmake

AGENTS.md

@@ -0,0 +1,373 @@
+# AGENTS.md
+
+Guidance for AI coding agents (and new contributors) working on Questshock.
+README.md is the user-facing build/usage guide and CONFIG.md documents the
+configuration file; this file covers how the code is organised and the rules to
+follow when changing it.
+
+## 1. What this project is
+
+Questshock plays the 1994 game System Shock on a standalone VR headset (Meta
+Quest 2 is the tested device). It wraps [Shockolate](https://github.com/Interrupt/systemshock),
+a cross-platform port of the original engine, in an Android app that:
+
+- runs the unmodified 2D engine (software or OpenGL renderer) and shows its
+  frame on a head-tracked virtual screen (an OpenXR quad layer);
+- shows a menu and an on-screen keyboard as separate OpenXR quads, operated by
+  a laser pointer from either controller;
+- maps controller inputs to game actions through a configurable binding layer;
+- persists settings in `/sdcard/questshock/questshock.config.json`.
+
+A desktop (Linux/Windows) build of the same engine exists for development
+without a headset; it has none of the Android/OpenXR code.
+
+## 2. Hard rules
+
+These come from the maintainer. Follow them without being asked again.
+
+1. **Never commit.** Do not run `git commit` (or amend, rebase, push), even if
+   asked to commit. Draft the commit message and show it; the maintainer runs
+   the commit. Mention any new untracked file that has to be `git add`ed
+   (typically a new patch under `android/engine-patches/`).
+2. **Do not build.** Do not run `make apk`, `./gradlew`, or `make android-studio`
+   to check that a change compiles. The maintainer deploys from Android Studio.
+   `make apk` and `make android-studio` overwrite `android/engine.properties`
+   with container-only paths and break an open Android Studio project. What you
+   can do is dry-run patches (section 6) and run static consistency checks
+   (section 12). Say plainly in your report that the change was not built or
+   tested.
+3. **`engine/` and `android/gl4es-src/` are never edited.** They are vendored
+   snapshots. Every change to them is a numbered patch under
+   `android/engine-patches/` or `android/gl4es-patches/`, applied to a scratch
+   copy at build time. (`engine/` is GPLv3, see README section 6.)
+4. **Patch numbers stay contiguous** (`01`, `02`, ... with no gap). When you
+   insert or delete a patch, renumber the rest and update every reference to
+   the numbers (README patch reference, code comments).
+5. **Comments and documentation describe the current state and why it has to be
+   that way.** No history or narrative: no "used to", "originally", "no
+   longer", "now", "this was fixed", "confirmed on device", incident stories or
+   dropped alternatives. History belongs in commit messages. A comment that
+   would read oddly to someone who never saw an earlier version should be
+   rewritten or cut. Default to one or two lines. (README section 5.5, the
+   debugging notes, is the one deliberate exception.)
+6. **Standalone headset only, OpenXR first.** No feature may need a host PC
+   (no PCVR, tethering or streaming). Prefer OpenXR APIs over vendor-specific
+   ones (Meta's Oculus Mobile SDK and the like) so the port can run on other
+   Android OpenXR headsets. Flag a request that would break either rule
+   instead of quietly doing it.
+7. **Do not bump `build-image/VERSION`** just because `build-image/Dockerfile`
+   changed. Bump it only once a build with the current number has succeeded
+   end to end (for example a CI run). Ask if unsure.
+8. **Keep docs in sync with behaviour.** A user-visible change updates
+   README.md and/or CONFIG.md in the same change; a new or renumbered engine
+   patch updates the README patch reference (section 5.4).
+
+## 3. Repository layout
+
+| Path | What it is |
+|---|---|
+| `engine/` | Vendored Shockolate source. Read-only for us. |
+| `android/engine-patches/` | Numbered `patch -p1` files applied to a scratch copy of `engine/`. |
+| `android/gl4es-src/`, `android/gl4es-patches/` | Vendored GL4ES (desktop GL to GLES) and its patches. |
+| `android/app/src/main/cpp/` | First-party native code (section 4). |
+| `android/app/src/main/java/de/ladkau/questshock/` | First-party Java (section 4). `org/libsdl/app/` is vendored SDL2 glue (zlib). |
+| `android/app/build.gradle` | Gradle project; the `stageEngine` task stages the patched engine. |
+| `android/force-rebuild.sh` | Stops Gradle daemons and wipes staged/build output for a fully fresh native build. |
+| `build-image/` | Docker build environment (`Dockerfile`, `VERSION`, `prepare-android-project.sh`, `build-apk.sh`, engine build scripts). |
+| `res/` | Bundled resources: `questshock.config.default.json`, `controller_profiles/` (JSON + PNG per controller), `assets/` (where the user's own game data goes, git-ignored), `run.sh`/`run.bat`. |
+| `Makefile` | `engine`, `dist`, `package`, `apk`, `android-studio`, `clean`, ... (see README section 2). |
+| `README.md`, `CONFIG.md`, `NOTICE.txt` | User docs, config reference, license notice. |
+
+`build/`, `dist/`, `dist-win/` and `res/assets/ss_ee/` are generated or
+proprietary and git-ignored. `registry.env` holds local registry settings; do
+not print it or commit it.
+
+## 4. Android app architecture
+
+### 4.1 Native modules (`android/app/src/main/cpp/`)
+
+| File | Role |
+|---|---|
+| `xr_session.c/.h` | OpenXR instance and session lifecycle, frame loop, composition layers (game quad, menu, keyboard, laser beams). |
+| `xr_swapchain.c/.h` | Swapchain creation, acquire and release, per-image FBOs. |
+| `xr_overlay.c/.h` | Generic "off-screen Android `View` rendered into an OpenXR quad" module, hit-tested by a laser pointer. The menu and the keyboard are two instances. |
+| `xr_input.c/.h` | Controller input: OpenXR actions, raw-input layer, action bindings, capture-mode rebinding, key injection into the engine, free view, cyberspace scaling, snap-turn/smooth-move of the player's position, pointer rays. The largest file. |
+| `xr_mouse.c/.h` | Injects mouse motion and clicks into the engine. |
+| `qs_config.c/.h` | Configuration: JSON parse, apply, write; screen profiles; menu-driven requests; cheats; menu-triggered pause. |
+| `questshock_native.c` | JNI exports and small native helpers (`nativeChdir`, `nativeSendPrintableChar`, ...). |
+
+### 4.2 Java classes
+
+| Class | Role |
+|---|---|
+| `QuestShockActivity` | `SDLActivity` subclass. Creates `/sdcard/questshock/`, extracts bundled files, blocks engine start until the game data exists. |
+| `OverlayPanel` | Base for the off-screen panels: builds the view tree, renders it to a texture, turns ray hits into touch events. |
+| `MenuOverlay` | The menu: Main Menu, Video Options, Controller Options and Cheats tabs. Singleton. |
+| `KeyboardOverlay` | The on-screen keyboard. |
+| `Strings` | All menu and keyboard text in English, French and German. |
+
+### 4.3 How the pieces fit
+
+- The engine's present path is redirected (engine patch 11) so that
+  `SDLDraw()` submits into the OpenXR game-quad swapchain. The per-frame
+  entry point of `xr_input.c` is `xr_input_sync_and_draw()`, called from the
+  frame path in `xr_session.c` on the engine's own thread.
+- The engine's own log output goes to logcat (patch 08); Java and native
+  first-party code log under the tag `QuestShock`.
+- Bindings, config and menu state are owned natively. Java only displays and
+  requests.
+
+### 4.4 Threads and cross-thread requests
+
+- Engine state (player struct, game loop, cheats, config apply) must only be
+  touched on the engine thread.
+- Menu code calls native functions through JNI. Anything that changes engine
+  state must be enqueued, not executed inline: the JNI export calls a
+  `qs_config_request_*()` function, which pushes an SDL custom event
+  (`SDL_RegisterEvents`); `qs_config_handle_event()` handles it on the engine
+  thread (it is called from `pump_events()`, engine patch 21). To add a new
+  request, add an event type, the `qs_config_request_*()` enqueue function and
+  a branch in `qs_config_handle_event()`.
+- Getters that Java calls (`qs_config_cheat_unlimited_mask()`, binding-name
+  getters, ...) must be plain scalar or string reads that are safe from any
+  thread.
+- Per-frame work that must run on the engine thread (such as
+  `qs_config_frame_tick()`) is called from `xr_input.c`.
+- JNI symbol names must match the Java `native` declarations exactly
+  (`Java_de_ladkau_questshock_<Class>_<method>`). A mismatch only fails at
+  runtime, so check it (section 12).
+
+### 4.5 Off-screen views (`OverlayPanel`, `MenuOverlay`, `KeyboardOverlay`)
+
+The view tree is built and drawn from native code and is never attached to a
+window. Consequences that shape the UI code:
+
+- Only `ACTION_DOWN`/`ACTION_UP` touches arrive (the laser trigger). There is no
+  drag, fling or multi-touch. Scrolling is done by a self-drawn scroll bar
+  (`ScrollBarView` in `MenuOverlay`), not by the framework.
+- `View.post()` never runs, so anything that defers work through it does not
+  work. `ProgressBar` and `SeekBar` are unusable for the same reason.
+- Hover and hit-testing use `OverlayPanel.absoluteBounds()`, which subtracts
+  ancestor scroll offsets.
+- Toggling a child's visibility needs an explicit re-measure and re-layout
+  (see `relayoutAndRedraw()`).
+- All user-visible text goes through `Strings.get(key, language)` with an
+  English, French and German entry, and is re-applied in `applyTranslations()`
+  when the language changes. "OpenGL" is a brand name and is not translated.
+
+## 5. Configuration system
+
+- `qs_config.c` holds one parsed struct per group (`video_options`, `general`,
+  `player_position`, `player_controls`), a parse function, an apply function,
+  and the writer `qs_config_write_file()`. Groups are tagged live-appliable or
+  restart-required (`QS_*_REQUIRES_RESTART`).
+- Load order at startup: `questshock.config.json`, else
+  `questshock.config.default.json` (bundled, refreshed on every launch), else
+  the engine's own `prefs.txt` behaviour. Save is only ever an explicit menu
+  action.
+- Invalid values are logged and skipped individually; unknown keys are ignored.
+
+**Adding an option:** parsed-struct field, parse, apply (with validation and a
+`WARN` on invalid input), write in `qs_config_write_file()`, restart flag,
+`CONFIG.md`, and (if it should have a shipped default) `res/questshock.config.default.json`.
+
+The virtual screen has two profiles, "initial" (splash, cutscenes, main menu)
+and "game", switched by `qs_screen_profile_notify_loop_mode()` from engine
+patch 22. `s_screen_profile_is_game` in `qs_config.c` doubles as "a game is
+running" and gates the cheats and the menu pause.
+
+## 6. Engine patches
+
+Rules:
+
+- Guard every engine change with `#ifdef __ANDROID__` so the desktop build is
+  unaffected, and keep hunks minimal.
+- Patches are applied in filename order with `patch -p1` from the engine root
+  (paths look like `a/src/GameSrc/hkeyfunc.c`). Patch N is generated against
+  the tree with patches `01..N-1` applied.
+- Some engine files use CRLF line endings (for example `mouselook.c`). Edits
+  and generated patches must preserve them byte for byte; check with `file`
+  or `cat -A`. An editor or script that rewrites line endings produces a
+  whole-file diff.
+- Do not hand-edit hunk headers. Regenerate the patch from a scratch copy.
+
+Creating or changing a patch:
+
+1. Make a scratch copy of `engine/` (for example under the session scratch
+   directory) and apply patches `01..N-1` to it (`patch -p1 -d <scratch> < ...`).
+2. Copy the target file(s) to a second location, edit them in the scratch copy.
+3. Produce the patch with `diff -u` using `a/` and `b/` path prefixes relative
+   to the engine root, and save it as `android/engine-patches/NN-android-<topic>.patch`.
+4. Dry-run the whole series on a fresh copy of `engine/`
+   (`patch -p1 --dry-run`, or apply for real on the copy) and confirm every
+   patch applies cleanly, with the patched file byte-identical to what you
+   edited.
+5. Keep numbering contiguous, and update the README patch reference (5.4) and
+   any code comments that cite patch numbers.
+
+Gradle's `stageEngine` task re-stages and re-patches on build, but it can wrongly
+report `UP-TO-DATE` when a **new** patch file appears. If a native change does
+not show up on the device, tell the maintainer to run `./gradlew --stop`, or
+`android/force-rebuild.sh`, or delete `build/android-engine`, before assuming
+the change is wrong.
+
+Engine symbols used from first-party code (for example `game_paused`,
+`pause_game_func`, `toggle_giveall_func`, `qs_cheat_refill`,
+`qs_in_cyberspace`) are declared `extern` next to their use in `qs_config.c` or
+`xr_input.c`, with a comment naming the engine file and patch.
+
+## 7. Controller mapping (`xr_input.c`)
+
+Structure:
+
+- Physical controls are OpenXR actions, suggested once against three
+  interaction profiles: Meta Touch, HTC Vive wand and the core
+  `khr/simple_controller`. A single wrong path makes the whole
+  `xrSuggestInteractionProfileBindings` call fail, so each profile lists only
+  components it really has. A failure calls
+  `qs_config_report_fatal_input_error()` and aborts input init.
+- The **raw-input layer** (`QsRawInput`) digitizes every physical control
+  (buttons, triggers, squeezes, thumbstick clicks, and eight thumbstick
+  directions with hysteresis) each frame. `QS_RAW_NONE` means unbound.
+- **Actions** (`QsControlAction`) are bound to raw inputs through `s_binding[]`.
+  The default bindings are `kDefaults[]`.
+- Contexts: `ALWAYS`, `NORMAL` (move, strafe, turn, jump, stand, crouch, prone)
+  and `CYBER` (the eleven `cyber_*` actions). The active set is chosen with
+  `qs_in_cyberspace()` (patch 24). Two actions conflict only if their contexts
+  can be active together (`xr_input_contexts_overlap()`).
+- Capture mode (`xr_input_process_capture()`): the next fresh raw down-edge is
+  assigned to the chosen action. Any other action in an overlapping context that
+  held that input (or its symmetric alias) is set to `none`. The reset and the
+  timeout (8 s) paths never leave a half-assigned state.
+- The menu button is not a raw input and can never be bound, so the menu can
+  always be reached to press **Reset to Defaults**.
+- While the menu is open, `mouse_click` is always the trigger (the controller
+  used to operate the menu); after it closes, the bound `mouse_click` drives
+  both the keyboard and the game quad.
+- While the Controller Options tab is open, the menu's own thumbstick
+  snap-turn and smooth-move are disabled
+  (`g_controller_options_tab_open`, set through
+  `nativeSetControllerOptionsTabOpen`).
+- Free view: holding a `free_*_thumbstick_view` binding turns that stick into
+  the engine's mouse look (cursor forced hidden, stick direction bindings
+  suspended). It uses `SDL_ShowCursor(SDL_DISABLE)` because the engine zeroes
+  mouse-look velocity while the cursor is visible.
+- Cyberspace pitch and bank scale with stick deflection through the globals
+  from patch 25 (`qs_cyber_pitch_scale`, `qs_cyber_bank_scale`).
+
+### Adding or changing a bindable action (checklist)
+
+All of these lists share one order and must stay identical:
+
+1. `QsControlAction` enum in `xr_input.c` (and append before `QS_ACTION_COUNT`).
+2. `kActionNames[]` in `xr_input.c`.
+3. `s_binding[]` initial values and `kDefaults[]` in `xr_input.c`.
+4. If it injects a key: a `kKeyActions[]` entry (keycode, modifiers, whether it
+   needs `SDL_TEXTINPUT`); add the key to the stuck-key watchdog list
+   (`kWatchedKeys`) if it is held continuously.
+5. `ACTION_KEYS` in `MenuOverlay.java`, and `FIRST_ROW_ACTIONS` if it should be
+   listed first.
+6. `Strings.java`: `action_<key>` in EN/FR/DE.
+7. `QS_MAX_PLAYER_CONTROL_ACTIONS` in `qs_config.c` if the count outgrows it.
+8. `CONFIG.md`: the action tables and the count in the Player Controls intro;
+   README default-controls table if it has a default binding.
+9. Check that no two actions that can be active together share a default input.
+
+### Injecting keys into the engine
+
+- Plain printable keys (letters, digits, Space, punctuation) need an
+  `SDL_TEXTINPUT` event plus `SDL_KEYDOWN`/`SDL_KEYUP`. Modifier, control-range,
+  F and keypad keys use `SDL_KEYDOWN`/`SDL_KEYUP` with the right `mod`.
+- **Send the release on the real up edge, never in the same call as the
+  press.** The engine polls movement keys once per frame before it drains
+  events, so a press and release drained together are never seen and the key
+  silently does nothing. Tie the release to the physical button's up edge (or
+  the touch's `ACTION_UP`/`ACTION_CANCEL`).
+- Held keys are tracked in the engine's `sshockKeyStates[]`; `xr_input.c`
+  keeps a watchdog that clears a watched key the engine still thinks is down
+  after its binding is released.
+- Actions that share an engine key (for example the several ways to fire, or
+  the movement keys) are handled with sibling logic in the dispatch loop
+  (`wantDown[]`); do not press or release the shared key independently.
+
+## 8. Cheats tab
+
+- Buttons and switches live in `MenuOverlay.buildCheatsTab()`; ids are
+  `QS_CHEAT_*` in `qs_config.c` and `CHEAT_*` in `MenuOverlay.java` (keep them
+  identical).
+- The engine's own cheat handlers (`toggle_giveall_func`, `toggle_physics_func`,
+  `toggle_up_level_func`, `toggle_down_level_func`) are called on the engine
+  thread through `qs_apply_cheat()`, and only while a game is running.
+- The four unlimited switches are a bitmask in `qs_config.c`
+  (`QS_CHEAT_MASK_*`: health 1, energy 2, ammo 4, items 8). Every frame
+  `qs_config_frame_tick()` calls `qs_cheat_refill(mask)` (patch 26). The mask
+  values must match the patch. The switches are not persisted.
+- The four `cheat_*` hotkeys are deliberately not bindable in
+  `player_controls`. New cheats go on the Cheats tab.
+
+## 9. Menu pause
+
+Opening the menu pauses a running game (`qs_apply_menu_pause()` through the
+menu-visibility event); closing it resumes only if the menu did the pausing and
+the game is still paused. Do not toggle pause blindly, since the pause function
+toggles.
+
+## 10. Bundled files on the device
+
+`QuestShockActivity` extracts these into `/sdcard/questshock/`:
+
+- shaders, the default soundfont and `GET_ASSETS_QUEST.txt` (once);
+- `questshock.config.default.json` and `controller_profiles/` (every launch,
+  overwriting only the bundled filenames so user-added profiles survive).
+
+`res/controller_profiles/` and the default config are staged into APK assets by
+`build-image/prepare-android-project.sh`; new staged directories must also be
+declared as `inputs.dir(...)` of `stageEngine` in `android/app/build.gradle`.
+
+The proprietary game data (`res/data/`, `res/sound/`) is never bundled or
+committed. The app refuses to start the engine until it is present.
+
+## 11. Code and documentation style
+
+- Match the surrounding code: naming, comment density, idiom. C is plain C with
+  `static` helpers and `//` comments; Java targets Android API 34 and uses only the SDK plus
+  `androidx.core`.
+- Keep functions and file-level constants near their use. Put magic numbers in
+  named constants (see `QS_FREE_VIEW_*`, `QS_CYBER_ROTATION_*`).
+- Keep the `xr_input.h` and `qs_config.h` declarations documented with a short
+  comment saying which thread may call them.
+- Comments: what and why, current state only (rule 5 in section 2).
+- Docs: README.md is organised by numbered sections that other text cites
+  ("5.5.3"); do not renumber existing sections. Add new material as a new
+  subsection instead.
+- English, French and German strings live in `Strings.java`; keep the three
+  entries of each key on the same `put(...)`.
+
+## 12. Verifying a change without building
+
+Because you may not build (rule 2), check statically and say so in the report:
+
+- **Patches:** apply the whole series to a fresh copy of `engine/` and confirm
+  no rejects. Confirm the edited file matches the patched result byte for byte.
+- **JNI:** every `native` method in the Java classes has a
+  `Java_de_ladkau_questshock_<Class>_<method>` export with a matching signature,
+  and no export is left without a Java declaration.
+- **Ordered lists:** `QsControlAction`, `kActionNames[]`, `s_binding[]`,
+  `kDefaults[]` and `ACTION_KEYS` have the same length and order.
+- **Strings:** every `Strings.get("...")` key exists in `Strings.java`.
+- **Balance:** braces and parentheses balance. `qs_config.c` reports a
+  brace-count offset of +5 from character literals containing `'{'`; that is
+  not a bug.
+- **Docs:** README and CONFIG.md agree with the code (action counts, default
+  bindings, patch list).
+
+Then report what was checked, what was not (build, on-device behaviour), and
+any device check the maintainer should do (for example a new patch that may
+need `android/force-rebuild.sh`).
+
+## 13. Commit messages
+
+Draft only (rule 1). Use a short imperative subject (about 70 characters), a
+blank line, then a body that explains what the change does and why: the
+user-visible behaviour, the mechanism, and any constraint worth remembering.
+Mention new files that need `git add`.

CONFIG.md

@@ -0,0 +1,458 @@
+# Persistent configuration (`questshock.config.json`)
+
+QuestShock can load a persistent, human-editable configuration file at
+startup, in addition to (and independent of) the engine's own `prefs.txt`.
+
+- **Location**: `/sdcard/questshock/questshock.config.json` - the same
+  folder you already copy `res/data`/`res/sound` into (see README.md
+  section 5.1).
+- **Format**: plain JSON, grouped by concern. Each top-level key is a
+  *group*; each key inside a group is one *option*.
+- **Loading**: read automatically at app startup, before the splash screen,
+  if the file exists. If it doesn't, `questshock.config.default.json` (same
+  folder) is used instead - a copy bundled with the app, refreshed on every
+  launch, never overwriting your own saved `questshock.config.json`. If
+  neither file exists, the engine behaves as it did before this file
+  existed (driven by `prefs.txt` as usual).
+- **Saving**: never automatic. In-headset, open the menu (controller menu
+  button) and press **Save Configuration** to write the file from your
+  current live settings, overwriting it if present. Press **Load
+  Configuration** to re-read the file and apply it without restarting the
+  app.
+- **Live vs. restart-required**: every option below is tagged as either
+  *live-appliable* (applying it while already playing takes effect
+  immediately) or *restart-required*. Pressing **Load Configuration**
+  applies every live-appliable change straight away; if the file also
+  changes something restart-required, a dialog lists exactly which
+  option(s) need it and offers:
+  - **Dismiss** - keep playing with the live-appliable changes already
+    applied; the restart-required option(s) stay as they were.
+  - **Restart Now** - relaunches the app, which re-runs this same startup
+    load and so applies every group in the file, including the
+    restart-required ones.
+
+  (Every option currently documented below is live-appliable, so this
+  dialog won't actually appear yet - it's built in for options added in a
+  future version that do need a restart.)
+- Unrecognized groups/keys are ignored (harmless if you're editing the file
+  in advance for a future version). An invalid value for a *specific*
+  option (see each option's possible values below) is logged and that one
+  option is skipped - every other valid option in the file still applies.
+  A file that isn't valid JSON at all is ignored entirely, with nothing
+  applied.
+- `questshock.config.json` and `prefs.txt` are fully independent - loading
+  or saving one never reads or writes the other.
+
+## Example
+
+```json
+{
+  "video_options": {
+    "renderer": "opengl",
+    "resolution": "1024x768",
+    "initial_screen_width_m": 1.6,
+    "initial_screen_distance_m": 2.0,
+    "game_screen_width_m": 2.8,
+    "game_screen_distance_m": 2.0,
+    "screen_width_offset_m": 1.0,
+    "screen_width_step_m": 0.6,
+    "screen_distance_offset_m": 1.0,
+    "screen_distance_step_m": 0.5
+  },
+  "general": {
+    "language": "english"
+  },
+  "player_position": {
+    "x": 0.0,
+    "z": 0.0,
+    "yaw_degrees": 0.0
+  },
+  "player_controls": {
+    "move_forward": "left_thumbstick_up",
+    "move_back": "left_thumbstick_down",
+    "strafe_left": "left_thumbstick_left",
+    "strafe_right": "left_thumbstick_right",
+    "turn_left": "right_thumbstick_left",
+    "turn_right": "right_thumbstick_right",
+    "jump": "left_thumbstick_click",
+    "mouse_click": "right_a",
+    "mouse_double_click": "right_b",
+    "stand": "right_thumbstick_up",
+    "prone": "right_thumbstick_down",
+    "map_view": "right_thumbstick_click",
+    "fire_weapon": "right_trigger"
+  }
+}
+```
+
+## Video Options (`video_options`)
+
+### `renderer`
+
+Which renderer the game uses to draw the 3D view.
+
+- **Type**: enum
+- **Possible values**: `"software"`, `"opengl"`
+- **Restart required?**: No (live-appliable)
+
+### `resolution`
+
+The game's internal rendering resolution.
+
+- **Type**: enum
+- **Possible values**: `"320x200"`, `"320x400"`, `"640x400"`, `"640x480"`, `"1024x768"`
+- **Restart required?**: No (live-appliable)
+
+### `initial_screen_width_m`, `initial_screen_distance_m`, `game_screen_width_m`, `game_screen_distance_m`
+
+The virtual screen's physical width and distance from the player (both in
+meters) - the game shows two independently configurable screen
+"profiles", switched automatically based on what's currently on screen:
+
+- **Initial Screen** (`initial_screen_*`) - the splash screen, intro
+  cutscenes, and the game's own main menu.
+- **Game Screen** (`game_screen_*`) - actual gameplay (the 3D view,
+  automap, cyberspace, etc.).
+
+Switching happens automatically - no player action needed - the instant
+the game itself transitions between these (e.g. starting/loading a game,
+or returning to the menu).
+
+- **Type**: number (meters)
+- **Possible values**: the in-headset Video Options tab offers 5 presets
+  each - widths `1.0`, `1.6` (the original, pre-this-feature default),
+  `2.2`, `2.8`, `3.4`; distances `1.0`, `1.5`, `2.0` (the original,
+  pre-this-feature default), `2.5`, `3.0` - but a hand-edited value
+  doesn't need to match a preset exactly (it's clamped to a sane range -
+  width `[0.2, 10.0]`, distance `[0.5, 10.0]` - rather than snapped or
+  rejected; the Video Options tab just shows no button selected for an
+  in-between value).
+- **Restart required?**: No (live-appliable)
+- **Note**: the screen is always flat - there's no curve option.
+
+### `screen_width_offset_m`, `screen_width_step_m`, `screen_distance_offset_m`, `screen_distance_step_m`
+
+Reshapes the 5 preset buttons the Video Options tab offers for width and
+distance (above) - config-file-only, there's no in-headset control for
+these. Shared by both **Initial Screen** and **Game Screen** (both
+columns' buttons show the same 5 values per row) - this only changes
+what the buttons offer, not either profile's current value.
+
+Preset button `index` (0-4) shows `offset + step * index`. For example,
+a distance offset of `0` and step of `2` shows buttons `0`, `2`, `4`,
+`6`, `8`; the defaults below reproduce this feature's original launch
+presets exactly.
+
+- **Type**: number (meters)
+- **Default values**: width offset `1.0`, step `0.6` (buttons `1.0`,
+  `1.6`, `2.2`, `2.8`, `3.4`); distance offset `1.0`, step `0.5` (buttons
+  `1.0`, `1.5`, `2.0`, `2.5`, `3.0`).
+- **Restart required?**: No (live-appliable)
+- **Note**: not clamped - an unusual offset/step (e.g. negative step) is
+  accepted as-is. A resulting preset value outside the current value's
+  own clamp range (see above) still clamps normally when that preset
+  button is actually pressed.
+
+## General (`general`)
+
+### `language`
+
+The game's UI/text language - both the game's own resource strings and this
+project's own menu/keyboard chrome text (title bar, buttons, etc.).
+
+- **Type**: enum
+- **Possible values**: `"english"`, `"french"`, `"german"`
+- **Restart required?**: No (live-appliable) - applies the same way the
+  game's own in-game options menu applies a language change (reloads the
+  language-specific resource files and refreshes the inventory/MFD/side-icon
+  UI immediately).
+- **Note**: French and German both need their own full resource pack
+  (`frnstrng.res`/`mfdfrn.res`, `gerstrng.res`/`mfdger.res` under
+  `res/data/`) - if any of those files aren't present, the switch is
+  refused (logged, `questshock.config.json` and the current language are
+  left unchanged) rather than leaving the game with no valid resource file
+  open. See README.md section 3 ("Game assets") for where `mfdfrn.res`/
+  `mfdger.res` come from - the GOG Enhanced Edition installer alone doesn't
+  include them.
+- The intro cutscene is also played in the selected language when its
+  voice-over file (`svfrintr.res`/`svgeintr.res` under `res/data/`) is
+  present; otherwise the English intro plays.
+
+## Player Position (`player_position`)
+
+Where the player is virtually standing/facing, independent of - and not
+reset by - starting a new game or loading a save (same independence from
+`prefs.txt`/savegames as every other group here). Set by moving around
+in-headset (menu open, left thumbstick snap-turns, right thumbstick smooth-
+moves) to line yourself up with the game quad ("virtual screen"). Height is
+never included here - it always comes from your real tracked headset
+height, not this file.
+
+**Startup fallback**: only applied at startup if all three fields (`x`,
+`z`, `yaw_degrees`) are present - a config file with none of them (or none
+at all), or a partial/hand-edited one missing any of the three, falls back
+to an automatic recenter instead (see **Reset Position** below), using
+your real head pose at that moment. A complete saved position is applied
+as-is, with no such recenter.
+
+**Reset Position** (Main Menu tab) is a live-only action, not a config
+value: it moves you to the centre in front of the game quad, based on where
+your head actually is right now. It resets only your *position*, not which
+way you're facing, so the screen does not rotate to follow your gaze - press
+it while looking off to one side and the screen stays off to the other side.
+The automatic recenter at startup (when there's no saved position) does
+face the screen towards where you're looking. Reset Position never reads or
+writes `questshock.config.json`.
+
+### `x`, `z`
+
+Horizontal position, in meters, on the play space's floor plane.
+
+- **Type**: number
+- **Restart required?**: No (live-appliable)
+
+### `yaw_degrees`
+
+Which way the player is virtually facing, in degrees.
+
+- **Type**: number
+- **Restart required?**: No (live-appliable)
+
+## Player Controls (`player_controls`)
+
+Maps each of 57 in-game actions to a physical controller input: 9
+movement/click actions, 2 free-view actions, 11 cyberspace actions, and 35
+for the engine's own keyboard hotkeys and firing (posture, save/load, weapon
+select, MFD panels, etc. - see the hotkey table below). Some actions are bound by default (see the default-input
+columns); the rest are unbound and can be bound on demand. Assign them in the
+**Controller Options** menu tab: tap an action's binding button, then press
+the button or stick direction to use ("Press a button…"); tap it again, or
+wait 8 seconds, to cancel without changing it.
+
+- **Type**: one enum-string field per action (below)
+- **Restart required?**: No (live-appliable) - a rebind takes effect
+  immediately, and persists across restarts once saved (**Save
+  Configuration**, same as every other group here).
+- **Menu movement**: while the Controller Options tab is open, the menu's own
+  thumbstick snap-turn and smooth-move (see `player_position`) are disabled, so
+  pressing inputs to assign them doesn't move you away from the screen.
+- **Not included here**: opening/closing the VR menu itself is a fixed,
+  non-remappable button (see "Menu button" below) - there's no
+  `menu_toggle` field, and the Controller Options tab never lets you
+  reassign it. This guarantees you can always reach this tab and press
+  **Reset to Defaults** to recover from any bad rebind, no matter what else
+  you've reassigned.
+- **Reset to Defaults**: restores the "Default input" column below for
+  every action not overridden by a `player_controls` group in
+  `questshock.config.default.json` - if that file defines one (it doesn't,
+  out of the box), the values it specifies are applied on top of the table
+  below instead, so you can customize what "reset" means without a rebuild.
+  This is independent of your own `questshock.config.json` - resetting
+  doesn't read or write that file, just the live bindings (**Save
+  Configuration** afterward to persist them).
+
+### Actions
+
+| Action key | Default input | Effect |
+|---|---|---|
+| `move_forward` | `left_thumbstick_up` | Walk forward |
+| `move_back` | `left_thumbstick_down` | Walk backward |
+| `strafe_left` | `left_thumbstick_left` | Step sideways, left |
+| `strafe_right` | `left_thumbstick_right` | Step sideways, right |
+| `turn_left` | `right_thumbstick_left` | Turn left |
+| `turn_right` | `right_thumbstick_right` | Turn right |
+| `jump` | `left_thumbstick_click` | Jump |
+| `mouse_click` | `right_a` | Click - operates the keyboard/game quad's cursor, whichever the pointing hand's ray is over |
+| `mouse_double_click` | `right_b` | Double-click - game quad only (e.g. using an inventory item); has no effect over the menu or keyboard |
+| `free_left_thumbstick_view` | `left_squeeze` | Hold to look around with the left thumbstick (see below) |
+| `free_right_thumbstick_view` | `none` | Hold to look around with the right thumbstick (see below) |
+
+Movement actions bound to a thumbstick direction are suppressed while the
+VR menu is open, since the same physical stick already snap-turns/smooth-
+moves the player in that state (see `player_position` above) - this is the
+one case where a binding's effect depends on whether the menu is open, and
+it only ever affects the 8 thumbstick-direction inputs below.
+
+**Free view** (`free_left_thumbstick_view`, `free_right_thumbstick_view`) is
+the engine's mouse look driven by a thumbstick. While the bound input is held,
+that stick looks around instead of doing its normal job: left/right turns the
+view, up/down looks up and down, in proportion to how far the stick is pushed.
+The stick's own direction bindings (move, strafe, turn, stand/prone) are
+suspended while it is held, and the cursor stays centred in the view. Release
+the input to return to normal. It has no effect while the VR menu is open.
+
+### Cyberspace actions
+
+Cyberspace has its own set of movement actions, active only while the player
+is in cyberspace. While in cyberspace the normal movement actions
+(`move_*`, `strafe_*`, `turn_*`, `jump`, `stand`, `crouch`, `prone`) are
+inactive, and the cyberspace actions are inactive everywhere else. Each set
+has its own bindings, so one input can be bound in both (for example the left
+stick up is `move_forward` on foot and `cyber_climb` in cyberspace);
+the Controller Options tab only reports a conflict between actions that can
+be active at the same time. Free view, clicking and firing work in both.
+
+Pitch and bank (`cyber_climb`, `cyber_dive`, `cyber_bank_*` and the four
+diagonals) are proportional when bound to a thumbstick direction: pushing the
+stick further turns faster, from 20% of full speed just past the trigger point
+to 60% at full deflection. Bound to a button they run at full speed. Thrust and
+roll are always full speed.
+
+| Action key | Default input | Keyboard equivalent | Effect |
+|---|---|---|---|
+| `cyber_thrust` | `right_thumbstick_up` | `s` | Thrust forward |
+| `cyber_climb` | `left_thumbstick_up` | `w` | Pitch up |
+| `cyber_dive` | `left_thumbstick_down` | `x` | Pitch down |
+| `cyber_bank_left` | `left_thumbstick_left` | `a` | Bank left |
+| `cyber_bank_right` | `left_thumbstick_right` | `d` | Bank right |
+| `cyber_roll_left` | `right_thumbstick_left` | `e` | Roll left |
+| `cyber_roll_right` | `right_thumbstick_right` | `q` | Roll right |
+| `cyber_climb_left` | `none` | Keypad 7 | Pitch up and bank left |
+| `cyber_climb_right` | `none` | Keypad 9 | Pitch up and bank right |
+| `cyber_dive_left` | `none` | Keypad 1 | Pitch down and bank left |
+| `cyber_dive_right` | `none` | Keypad 3 | Pitch down and bank right |
+
+`mouse_click` additionally behaves differently depending on the menu:
+while the VR menu is open, its "click" is always whichever hand's trigger
+is used to interact with the menu (so you can never lock yourself out of
+this settings screen by rebinding `mouse_click` elsewhere); once the menu
+is closed, both the on-screen keyboard (if it's still open) and the game
+quad use your actual `mouse_click` binding. The default (`right_a`) is a
+specific button on the right controller, so only the right hand's ray clicks;
+bind the `trigger` identifier (see below) for either hand to click.
+
+### Hotkey actions
+
+The engine's own keyboard hotkeys (`HotKeyLookup[]` in `Prefs.c`) plus
+firing, as 35 bindable actions. `stand` (`right_thumbstick_up`), `prone`
+(`right_thumbstick_down`), `map_view` (`right_thumbstick_click`) and
+`fire_weapon` (`right_trigger`) are bound by default; the rest are unbound
+(`none`). Each fires once per press, like pressing the key on a real
+keyboard (there is no hold behavior).
+
+| Action key | Keyboard equivalent | Effect |
+|---|---|---|
+| `stand` | `t` | Stand up |
+| `crouch` | `g` | Crouch |
+| `prone` | `b` | Go prone |
+| `pause` | `p` | Pause the game |
+| `full_view` | Ctrl+F | Switch to the fullscreen view loop |
+| `normal_view` | Ctrl+D | Switch to the normal gameplay view |
+| `map_view` | Ctrl+A | Switch to the automap view |
+| `save_game` | Ctrl+S | Save the game |
+| `load_game` | Ctrl+L | Load the game |
+| `select_grenade` | Ctrl+' | Select the next grenade type |
+| `arm_grenade` | Alt+' | Arm the selected grenade |
+| `select_drug` | Ctrl+; | Select the next drug/patch |
+| `use_drug` | Alt+; | Use the selected drug/patch |
+| `toggle_online_help` | Ctrl+H | Toggle the online help overlay |
+| `show_help` | Alt+O | Show the help screen |
+| `toggle_music` | Ctrl+M | Toggle music |
+| `quit` | Ctrl+Q | Quit the game - opt-in only; nothing binds this by default |
+| `cycle_weapon_next` | Tab | Ready the next weapon |
+| `cycle_weapon_prev` | Shift+Tab | Ready the previous weapon |
+| `cycle_detail` | Ctrl+1 | Cycle the graphics detail level |
+| `reload_weapon_primary` | Ctrl+Backspace | Reload the current weapon's primary ammo |
+| `reload_weapon_secondary` | Alt+Backspace | Reload the current weapon's secondary ammo |
+| `hud_color` | Alt+H | Cycle the HUD color scheme |
+| `clear_fullscreen` | Backspace | Close a fullscreen view (e.g. a datapad or email) |
+| `mfd_left_1`-`mfd_left_5` | F1-F5 | Set the left MFD panel to Weapon/Item/Map/Target/Info |
+| `mfd_right_1`-`mfd_right_5` | F6-F10 | Set the right MFD panel to Weapon/Item/Map/Target/Info |
+| `fire_weapon` | Enter | Fire the readied weapon at the cursor (the engine's default fire key). Clicking in the 3D view with `mouse_click` also fires; this is a separate button for it |
+
+**Not exposed** (other `HotKeyLookup[]` entries):
+- `keypad 0`-`keypad 9`: a controller button per digit is not useful; use the
+  on-screen keyboard.
+- `toggle_freelook` (F): the free-view actions cover mouse look.
+- The 4 `cheat_*` entries: debug cheats. They are on the menu's Cheats tab
+  instead, along with four switches for unlimited health, energy, ammo and
+  items. Those are not saved to the config.
+- `mac_help` (disabled) and `audiolog_cancel` (its build flag is not
+  defined): they are not real hotkeys in this build.
+- `toggle_opengl` (Ctrl+G): the Video Options tab's Renderer buttons already
+  toggle the same setting.
+- The 10 numeric hardware-item hotkeys (bio scan, fullscreen, 360 view,
+  lantern, shield, infrared, nav unit, data reader, booster, jumpjets): their
+  registered keys never match a real keypress in the engine.
+
+### Raw input identifiers
+
+Every raw physical input available to bind an action to, with its generic
+OpenXR interaction-profile component name and its Meta Quest Touch control
+name. Two symmetric identifiers (`trigger`, `squeeze`) are also accepted, but
+only for `mouse_click`/`mouse_double_click`: they mean "either hand's own
+trigger/grip, whichever hand is pointing". Every other identifier below
+refers to one specific control.
+
+| Identifier | OpenXR component (Touch) | Meta Quest control |
+|---|---|---|
+| `left_trigger` | `/user/hand/left/input/trigger/value` | Left Trigger |
+| `right_trigger` | `/user/hand/right/input/trigger/value` | Right Trigger |
+| `left_squeeze` | `/user/hand/left/input/squeeze/value` | Left Grip |
+| `right_squeeze` | `/user/hand/right/input/squeeze/value` | Right Grip |
+| `left_x` | `/user/hand/left/input/x/click` | X Button |
+| `left_y` | `/user/hand/left/input/y/click` | Y Button |
+| `right_a` | `/user/hand/right/input/a/click` | A Button |
+| `right_b` | `/user/hand/right/input/b/click` | B Button |
+| `left_thumbstick_click` | `/user/hand/left/input/thumbstick/click` | Left Thumbstick Click |
+| `right_thumbstick_click` | `/user/hand/right/input/thumbstick/click` | Right Thumbstick Click |
+| `left_thumbstick_up/down/left/right` | `/user/hand/left/input/thumbstick` (digitized) | Left Thumbstick, tilted |
+| `right_thumbstick_up/down/left/right` | `/user/hand/right/input/thumbstick` (digitized) | Right Thumbstick, tilted |
+| `trigger` | either hand's trigger | Either Trigger (`mouse_click`/`mouse_double_click` only) |
+| `squeeze` | either hand's grip | Either Grip (`mouse_click`/`mouse_double_click` only) |
+| `none` | - | Unbound - the action never fires |
+
+**Menu button** (left controller, Touch/Vive/generic alike) is not in this
+list - it always opens/closes the VR menu and can never be reassigned.
+
+**Other supported controllers**: HTC Vive wands have no A/B/X/Y and no
+analog grip - `left_x`/`left_y`/`right_a`/`right_b` simply never fire on
+that profile, and `left/right_squeeze` are a plain click rather than
+analog. Their trackpad stands in for the thumbstick identifiers above
+(same digitization, just a trackpad instead of a stick). A bare-minimum
+OpenXR controller (`khr/simple_controller`, used as a fallback when
+neither Touch nor Vive bindings are suggested) only has `left_trigger`/
+`right_trigger` (via its `select/click` component) and the menu button -
+every other identifier above simply never fires on it, which is why the
+Controller Options tab shows a note and hides irrelevant rows when this
+profile is active.
+
+### Controller profile files (`controller_profiles/`)
+
+The Controller Options tab shows a labeled illustration of whichever
+controller is actually active, driven by `res/controller_profiles/*.json`
+(bundled with the app, copied to `/sdcard/questshock/controller_profiles/`
+on every launch, refreshing the known bundled files without touching any
+extra ones you add there yourself). Each file:
+
+```json
+{
+  "name": "Meta Quest Touch",
+  "interaction_profile": "/interaction_profiles/oculus/touch_controller",
+  "image": "touch.png",
+  "controls": [
+    {"id": "right_b", "label": "B", "anchor_x": 0.76, "anchor_y": 0.22}
+  ]
+}
+```
+
+- `interaction_profile` - the OpenXR interaction profile path this file
+  describes; matched against whichever one is actually bound at runtime.
+  Falls back to `generic.json` if nothing matches.
+- `image` - filename (same folder) of the controller illustration.
+- `controls` - one entry per labeled point on that illustration: `id` is a
+  raw input identifier from the table above (thumbstick directions share
+  one `left_thumbstick`/`right_thumbstick` entry, since they're the same
+  physical stick); `anchor_x`/`anchor_y` are 0-1 fractions of the image for
+  positioning that label's pointer line.
+
+This is presentation data only - adding real support for a new controller
+still needs matching bindings in the app itself; a profile file with no
+corresponding code-level support just never gets matched.
+
+### Fatal startup error
+
+If the OpenXR runtime rejects any of the three supported controller
+profiles' bindings at launch (an app bug, not something you did), a
+non-cancelable dialog explains this and exits - this should never happen
+in a normal build.

Makefile

@@ -1,20 +1,28 @@
-# Assembles dist/ - a self-contained, runnable copy of System Shock -
-# from the compiled engine (built via Docker, see build-image.sh/
-# run-image.sh) and the game assets extracted from a purchased copy (see
+# Assembles dist/ (Linux) and dist-win/ (Windows, cross-compiled via
+# MinGW) - self-contained, runnable copies of System Shock - from the
+# compiled engine (built via Docker, see build-image.sh/run-image.sh) and
+# the game assets extracted from a purchased copy (see
 # res/assets/extract_assets.sh). Building the engine needs the build-image
 # (./build-image.sh, once); everything else here is plain file copying.
+# `dist-linux`/`dist-win` build just one platform; plain `dist` builds
+# both.
 #
-# `make package` instead builds a redistributable tarball that omits the
-# proprietary game assets entirely (see res/assets/GET_ASSETS.txt, which
-# it ships in their place) - this is what CI publishes.
+# `make package` instead builds redistributable archives (a .tar.gz for
+# Linux, a .zip for Windows) that omit the proprietary game assets
+# entirely (see res/assets/GET_ASSETS.txt, which they ship in their
+# place) - this is what CI publishes. Same dist-linux/dist-win/(both)
+# split via package-linux/package-win/package.
 
-DIST_DIR    := dist
-ENGINE_OUT  := engine/.build-output
-ASSETS_DIR  := res/assets/ss_ee
-BUILD_DIR   := build
-ARCH        := $(shell uname -m)
+DIST_DIR       := dist
+DIST_WIN_DIR   := dist-win
+ENGINE_OUT     := engine/.build-output
+ENGINE_OUT_WIN := engine/.build-output-win
+ASSETS_DIR     := res/assets/ss_ee
+BUILD_DIR      := build
+ARCH           := $(shell uname -m)
 
-.PHONY: all dist build-image engine assets package apk android-studio clean
+.PHONY: all dist dist-linux dist-win build-image engine engine-win assets \
+	package package-linux package-win apk android-studio clean
 
 all: dist
 
@@ -40,6 +48,16 @@ engine:
 		./run-image.sh; \
 	fi
 
+# Cross-compiles engine/ for Windows via MinGW - see build-engine-win.sh
+# for why this can't share build-engine.sh's engine/build_ext/ (a scratch
+# copy is used instead). Same QUESTSHOCK_BUILD_IMAGE detection as `engine`.
+engine-win:
+	@if [ -n "$$QUESTSHOCK_BUILD_IMAGE" ]; then \
+		bash build-image/build-engine-win.sh; \
+	else \
+		./run-image.sh bash build-image/build-engine-win.sh; \
+	fi
+
 # Fails with a pointer to extract_assets.sh if the purchased game assets
 # haven't been extracted yet.
 assets:
@@ -49,7 +67,10 @@ assets:
 		exit 1; \
 	fi
 
-dist: engine assets
+# Builds both platforms. `dist-linux`/`dist-win` build just one.
+dist: dist-linux dist-win
+
+dist-linux: engine assets
 	@echo "== Assembling $(DIST_DIR) =="
 	rm -rf "$(DIST_DIR)/systemshock" "$(DIST_DIR)/lib" "$(DIST_DIR)/res" \
 		"$(DIST_DIR)/shaders" "$(DIST_DIR)/run.sh"
@@ -64,6 +85,27 @@ dist: engine assets
 	chmod +x "$(DIST_DIR)/run.sh"
 	@echo "== Done - run $(DIST_DIR)/run.sh to play =="
 
+# Windows counterpart of dist-linux. Unlike dist/, the DLLs sit flat
+# alongside systemshock.exe instead of in a lib/ subdirectory - Windows'
+# default DLL search order already checks the executable's own directory
+# first, so (unlike run.sh's LD_LIBRARY_PATH) run.bat needs no extra
+# wiring for that.
+dist-win: engine-win assets
+	@echo "== Assembling $(DIST_WIN_DIR) =="
+	rm -rf "$(DIST_WIN_DIR)"
+	mkdir -p "$(DIST_WIN_DIR)/res/data" "$(DIST_WIN_DIR)/res/sound"
+	cp "$(ENGINE_OUT_WIN)/systemshock.exe" "$(ENGINE_OUT_WIN)"/*.dll "$(DIST_WIN_DIR)/"
+	cp "$(ENGINE_OUT_WIN)/soundfont.sf2" "$(DIST_WIN_DIR)/res/"
+	cp -a engine/shaders "$(DIST_WIN_DIR)/shaders"
+	cp -a "$(ASSETS_DIR)/data/." "$(DIST_WIN_DIR)/res/data/"
+	cp -a "$(ASSETS_DIR)/sound/." "$(DIST_WIN_DIR)/res/sound/"
+	cp res/run.bat "$(DIST_WIN_DIR)/run.bat"
+	@echo "== Done - run $(DIST_WIN_DIR)/run.bat (or systemshock.exe) to play =="
+
+# Builds both platforms' redistributable archives. `package-linux`/
+# `package-win` build just one.
+package: package-linux package-win
+
 # Builds a versioned, redistributable Linux release tarball at
 # dist/shockolate-<version>-linux-<arch>.tar.gz - everything needed to
 # run except the proprietary game assets (res/GET_ASSETS.txt explains how
@@ -72,7 +114,7 @@ dist: engine assets
 # tag to drive a release. Override with `make package VERSION=1.2.3`, or
 # just run it untagged for a local dev build (gets a 0.0.0-dev+<sha>
 # placeholder version, with a warning).
-package: engine
+package-linux: engine
 	@git config --global --add safe.directory "$$(pwd)" 2>/dev/null || true
 	@V="$$(VERSION="$(VERSION)" ./build-image/version.sh)"; \
 	PKG_NAME="shockolate-$$V-linux-$(ARCH)"; \
@@ -95,6 +137,33 @@ package: engine
 	rm -rf "$(BUILD_DIR)/package"; \
 	echo "Wrote $(DIST_DIR)/$$PKG_NAME.tar.gz"
 
+# Windows counterpart of package-linux: dist/shockolate-<version>-windows-
+# x86_64.zip. Same versioning (build-image/version.sh) and VERSION=
+# override. Needs `zip` on whatever host runs `make package-win` itself
+# (unlike engine-win's own build, packaging isn't run inside the
+# build-image) - see README's Desktop build prerequisites.
+package-win: engine-win
+	@git config --global --add safe.directory "$$(pwd)" 2>/dev/null || true
+	@command -v zip >/dev/null 2>&1 || { echo "PREFLIGHT FAIL: zip not found in PATH" >&2; exit 1; }
+	@V="$$(VERSION="$(VERSION)" ./build-image/version.sh)"; \
+	PKG_NAME="shockolate-$$V-windows-x86_64"; \
+	PKG_STAGE="$(BUILD_DIR)/package/$$PKG_NAME"; \
+	echo "Packaging $$PKG_NAME"; \
+	rm -rf "$$PKG_STAGE"; \
+	mkdir -p "$$PKG_STAGE/res"; \
+	cp "$(ENGINE_OUT_WIN)/systemshock.exe" "$(ENGINE_OUT_WIN)"/*.dll "$$PKG_STAGE/"; \
+	cp -a engine/shaders "$$PKG_STAGE/shaders"; \
+	cp "$(ENGINE_OUT_WIN)/soundfont.sf2" "$$PKG_STAGE/res/"; \
+	cp res/assets/GET_ASSETS.txt "$$PKG_STAGE/res/GET_ASSETS.txt"; \
+	cp res/run.bat "$$PKG_STAGE/run.bat"; \
+	cp LICENSE "$$PKG_STAGE/LICENSE"; \
+	cp engine/LICENSE "$$PKG_STAGE/LICENSE.Shockolate"; \
+	cp NOTICE.txt "$$PKG_STAGE/NOTICE.txt"; \
+	mkdir -p "$(DIST_DIR)"; \
+	(cd "$(BUILD_DIR)/package" && zip -rq "$(CURDIR)/$(DIST_DIR)/$$PKG_NAME.zip" "$$PKG_NAME"); \
+	rm -rf "$(BUILD_DIR)/package"; \
+	echo "Wrote $(DIST_DIR)/$$PKG_NAME.zip"
+
 # Builds the Quest APK (see build-image/build-apk.sh and
 # android/engine-patches/ - engine/ itself is never modified; a patch is
 # applied to a scratch copy at build time instead). Same
@@ -124,7 +193,7 @@ android-studio:
 	./run-image.sh bash build-image/prepare-android-project.sh --host-paths
 
 clean:
-	rm -rf "$(DIST_DIR)" "$(BUILD_DIR)" "$(ENGINE_OUT)" \
+	rm -rf "$(DIST_DIR)" "$(DIST_WIN_DIR)" "$(BUILD_DIR)" "$(ENGINE_OUT)" "$(ENGINE_OUT_WIN)" \
 		engine/build_ext engine/CMakeCache.txt engine/CMakeFiles \
 		engine/cmake_install.cmake engine/Makefile engine/systemshock \
 		engine/src/Libraries/CMakeFiles \

NOTICE.txt

@@ -16,3 +16,19 @@ The Android build additionally bundles:
 - The Khronos Group's OpenXR-SDK loader
   (https://github.com/KhronosGroup/OpenXR-SDK), prebuilt unmodified as
   lib/arm64-v8a/libopenxr_loader.so. It is Apache 2.0-licensed.
+
+The Windows build (cross-compiled via MinGW - see README's "4.2. Windows
+cross-build") additionally bundles:
+
+- GLEW (http://glew.sourceforge.net/), unmodified, as glew32.dll - used
+  for OpenGL extension loading, which Windows' own opengl32.dll doesn't
+  provide past OpenGL 1.1 (Linux instead gets this straight from Mesa's
+  headers, needing no separate loader library - see
+  engine/src/MacSrc/OpenGL.cc). It is licensed under a combination of the
+  Modified BSD License, the MIT License, and the Khronos License, all
+  permissive.
+- The MinGW-w64 runtime's winpthreads library, as libwinpthread-1.dll. It
+  is MIT-licensed. (GCC's own runtime, libgcc/libstdc++, is linked
+  statically into systemshock.exe instead of shipped as a DLL, under the
+  GCC Runtime Library Exception - this doesn't subject the rest of the
+  binary to the GPL.)

README.md

@@ -6,6 +6,17 @@ An open source project to play the classic 1994 System Shock on a VR
 headset, built on top of [Shockolate](https://github.com/Interrupt/systemshock),
 a cross-platform port of the original game.
 
+The game is played on a virtual screen: the engine renders its usual flat 2D
+frame, and Questshock shows it as a large screen floating in front of you in
+VR. It is not a stereoscopic 3D conversion; you sit or stand in front of the
+screen the way you would in front of a monitor or a cinema screen. The
+screen's width and distance can be set separately for the menus/intro and for
+gameplay. Both controllers act as laser pointers for the game's mouse-driven
+interface and for a VR menu and on-screen keyboard, and every controller
+button, stick direction and game hotkey can be assigned to a game action.
+Questshock runs entirely on the headset (tested on a Meta Quest 2) as a
+sideloaded Android app, and needs your own copy of the game data.
+
 ## 1. Design principles
 
 - **Standalone-headset-only.** The game must run entirely on the headset
@@ -31,6 +42,10 @@ a cross-platform port of the original game.
   "3. Game assets" below); `res/assets/extract_assets.sh` extracts it into
   `ss_ee/`.
 - `res/run.sh` - the launcher script, copied into `dist/` on build.
+- `res/questshock.config.default.json` - the bundled default configuration
+  (see [CONFIG.md](CONFIG.md)); `res/controller_profiles/` - the per-controller
+  illustrations and labels shown in the Controller Options tab (see
+  [CONFIG.md](CONFIG.md)). Both are copied into the APK.
 - `Makefile` - targets:
   - `all` (default) - alias for `dist`.
   - `build-image` - builds the Docker build-image (`./build-image.sh`).
@@ -90,12 +105,51 @@ package`/`make apk` pick it up the same way either way. This one copy of
 game assets feeds both the desktop build and the Android/Quest build
 below.
 
+**Note on French/German**: the GOG Enhanced Edition installer only ships
+English MFD (Multi-Function Display - the small in-game screens showing
+the map, inventory, etc.) art resources (`mfdart.res`) - it doesn't include
+`mfdfrn.res`/`mfdger.res`, which French/German need in addition to their
+own text resources (`frnstrng.res`/`gerstrng.res`, which the installer
+*does* include). Without those two files, switching to French/German (via
+`questshock.config.json`'s `general.language` or the in-headset menu's
+Language row - see [CONFIG.md](CONFIG.md)) is refused with an in-headset
+popup rather than applied, since doing so anyway used to crash the game. If
+you also own **System Shock: Classic** on gog.com (which does include both
+files), drop its offline installer into `res/assets/` alongside the
+Enhanced Edition one and `extract_assets.sh` pulls them out of it too,
+entirely optionally - it still runs fine with just the Enhanced Edition
+installer.
+
+The intro cutscene follows the selected language too, when the matching
+voice-over file (`svfrintr.res`/`svgeintr.res` under `res/data/`) is present;
+otherwise the English intro plays.
+
 ## 4. Desktop build
 
-Builds and runs Questshock natively on Linux (your dev machine, or any
-Linux box) - useful for local development and testing without a VR
-headset at all. For the VR-headset build, see "5. Android / Quest build"
-below instead.
+Builds and runs Questshock natively on the desktop (your dev machine, or
+any Linux/Windows box) - useful for local development and testing
+without a VR headset at all. For the VR-headset build, see "5. Android /
+Quest build" below instead.
+
+Two platforms: Linux (native) and Windows (x86_64, cross-compiled via
+MinGW - see "4.2. Windows cross-build" below for how). `make dist`/`make
+package` build **both** by default; use `make dist-linux`/`make
+dist-win` (or `package-linux`/`package-win`) to build just one.
+
+**Prerequisites:**
+
+- **Docker** - `build-image.sh`/`run-image.sh` build and run the engine
+  build-image; no other build tool touches the host directly. The
+  Windows cross-toolchain (MinGW) is baked into the same build-image, so
+  building `dist-win` needs nothing extra beyond Docker itself.
+- **`innoextract` and `unzip`** - optional, only needed by
+  `res/assets/extract_assets.sh` (see "3. Game assets" above) to unpack
+  the GOG installer locally; if either is missing, that script falls
+  back to running the extraction inside a throwaway Docker container
+  instead.
+- **`zip`** - only needed on the host for `make package`/`package-win`
+  (the Windows release archive); `make dist`/`dist-win` and
+  `package-linux` don't need it.
 
 ```sh
 # 1. Build the engine build-image (once, or after build-image/ changes)
@@ -104,11 +158,12 @@ below instead.
 # 2. Get your own copy of the game data (see "3. Game assets" above), then:
 res/assets/extract_assets.sh
 
-# 3. Compile the engine and assemble dist/
+# 3. Compile the engine and assemble dist/ (Linux) and dist-win/ (Windows)
 make dist
 
 # 4. Play
-dist/run.sh
+dist/run.sh                    # Linux
+dist-win/run.bat                # Windows (or systemshock.exe directly)
 ```
 
 `make dist` always recompiles the engine from the current `engine/`
@@ -117,14 +172,38 @@ source (via `run-image.sh`), so a fresh build-image plus a re-run of
 
 ### 4.1. Packaging a distributable build
 
-`make package` builds `dist/shockolate-<version>-linux-<arch>.tar.gz`: the
-compiled binary, its runtime libraries, shaders, a default MIDI
-soundfont, license information, and `res/GET_ASSETS.txt` in place of the
-actual game data (which the tarball never includes). Version comes from
-the current git tag (push a `vX.Y.Z` tag to drive a release); without one
-it builds an untagged `0.0.0-dev+<sha>` placeholder. `make apk` (see
-"5. Android / Quest build" below) is versioned identically, via the same
-`build-image/version.sh`.
+`make package` builds both `dist/shockolate-<version>-linux-<arch>.tar.gz`
+and `dist/shockolate-<version>-windows-x86_64.zip`: the compiled
+binary/DLLs, shaders, a default MIDI soundfont, license information, and
+`res/GET_ASSETS.txt` in place of the actual game data (which neither
+archive ever includes). Version comes from the current git tag (push a
+`vX.Y.Z` tag to drive a release); without one it builds an untagged
+`0.0.0-dev+<sha>` placeholder. `make apk` (see "5. Android / Quest build"
+below) is versioned identically, via the same `build-image/version.sh`.
+
+### 4.2. Windows cross-build
+
+`make dist-win`/`make package-win` cross-compile a native Windows x86_64
+build via MinGW (`x86_64-w64-mingw32-gcc`/`g++`, baked into the
+build-image alongside the Linux toolchain - see
+`build-image/build-engine-win.sh` and the "Windows cross-compile" section
+of `build-image/Dockerfile`) - no Windows machine, Wine, or VM involved
+in building it. `engine/CMakeLists.txt` already has working `WIN32`/
+`MINGW` branches from Shockolate's own upstream Windows build (built
+natively via Git Bash/MinGW on a real Windows machine - see
+`engine/build_win64.sh`/`engine/appveyor.yml`), so unlike the Quest
+build's `android/engine-patches/`, no source patching is needed here -
+this cross-compiles those same branches offline and reproducibly, from
+Linux, via Docker.
+
+`dist-win/`/the packaged `.zip` ship `systemshock.exe` with its DLLs
+(SDL2, SDL2_mixer, GLEW, fluidsynth-lite, plus the MinGW pthread runtime)
+sitting flat alongside it, rather than in a `lib/` subdirectory like
+`dist/` - Windows' default DLL search order already checks the
+executable's own directory first, so no `PATH`/library-path setup is
+needed the way `dist/run.sh` needs `LD_LIBRARY_PATH`.
+
+Confirmed working (and playable) on a real Windows machine.
 
 A Gitea Actions workflow (`.gitea/workflows/build.yml`) builds this
 package on every push, using the build-image as its container (so no
@@ -133,6 +212,18 @@ resulting tarball to dl.ladkau.de.
 
 ## 5. Android / Quest build
 
+**Prerequisites:**
+
+- **Docker** - same build-image as the desktop build (see "4. Desktop
+  build" above), plus network access at build time for Gradle/AGP's own
+  dependency resolution (the one target that isn't fully offline).
+- **SideQuest or `adb`** (Android Platform Tools) - to sideload the built
+  APK onto the headset, and to enable/verify USB debugging; see "5.1.
+  Installing and playing" below.
+- Building/debugging natively in Android Studio instead of via `make
+  apk` needs its own separate toolchain - see "5.2. Building natively in
+  Android Studio" below.
+
 `make apk` builds `dist/questshock-<version>-android-arm64.apk` - an
 immersive OpenXR app (see `android/app/src/main/cpp/xr_session.c`) that
 can be sideloaded onto any Android-based VR headset with OpenXR support
@@ -146,18 +237,17 @@ driven by a laser-pointer-style aim ray from each hand
 interact with it, same as the game's own Bluetooth mouse/keyboard input
 otherwise works unchanged.
 
-The menu launcher (`MenuOverlay.java` - just a "Keyboard" button so far)
-and the keyboard (`KeyboardOverlay.java`) are two fully independent quads,
-each its own `XrOverlay` instance (`android/app/src/main/cpp/xr_overlay.c`
-- a generic "off-screen Android View rendered into an OpenXR quad,
-hit-tested via a laser pointer" module shared by both, and by whatever
-similar panel comes next) with its own swapchain, visibility, and
-position, so they can be shown/hidden/moved independently - a design
-specifically meant to let the keyboard stay open while also picking
-something from the (still-to-be-built-out) menu. The controller's menu
-button only ever opens/closes the launcher; clicking its "Keyboard" button
-only opens the keyboard (never touching the launcher's own visibility) -
-the keyboard's own title bar holds the only way to close it again.
+The menu (`MenuOverlay.java`, described in "5.1.1. Menu, controls and
+cheats" below) and the keyboard (`KeyboardOverlay.java`) are two fully
+independent quads, each its own `XrOverlay` instance
+(`android/app/src/main/cpp/xr_overlay.c` - a generic "off-screen Android View
+rendered into an OpenXR quad, hit-tested via a laser pointer" module shared by
+both) with its own swapchain, visibility, and position, so they can be
+shown/hidden/moved independently - the keyboard can stay open while also
+picking something from the menu. The controller's menu button only ever
+opens/closes the menu; the menu's "Keyboard" button only opens the keyboard
+(never touching the menu's own visibility) - the keyboard's own title bar
+holds the only way to close it again.
 
 The keyboard is a hand-built, full US-layout key grid (there's no system
 IME to borrow once immersive) that forwards each key press straight to the
@@ -213,6 +303,54 @@ debugging enabled.)
    `/sdcard/questshock/res/`.
 4. Launch it again.
 
+`/sdcard/questshock/` also holds an optional persistent settings file,
+`questshock.config.json`, loaded automatically at startup and saved/loaded
+from the in-headset menu - see [CONFIG.md](CONFIG.md) for the documented
+options. Every launch also refreshes `questshock.config.default.json` (the
+bundled defaults, used when there is no `questshock.config.json`) and
+`controller_profiles/` (controller illustrations for the Controller Options
+tab) there; your own saved config and any extra profiles you add are left
+alone.
+
+#### 5.1.1. Menu, controls and cheats
+
+The controller's menu button (left controller) opens and closes the menu. It
+can't be reassigned. Opening it pauses a running game; closing it resumes the
+game, unless it was already paused. Aim with either hand's ray and pull the
+trigger to press buttons. The menu has four tabs:
+
+- **Main Menu** - Keyboard, Save/Load Configuration, Reset Position and the
+  language.
+- **Video Options** - renderer, resolution, and the width and distance of the
+  virtual screen for the initial screen (splash, intro, main menu) and the game
+  screen.
+- **Controller Options** - shows the active controller with labelled inputs,
+  and one button per action to assign it to a controller input (tap the
+  button, then press the input). Assigning an input that another action
+  already uses unbinds that other action. **Reset to Defaults** restores the
+  default bindings.
+- **Cheats** - the engine's cheats as buttons (give all items and weapons,
+  toggle physics, next and previous level) and four independent switches for
+  unlimited health, energy, ammo and items. The switches last until the app
+  restarts and are not saved. They only work while a game is running.
+
+Default controls (all assignable, see [CONFIG.md](CONFIG.md)):
+
+| Input | On foot | In cyberspace |
+|---|---|---|
+| Left stick | Move forward/back, strafe | Pitch up/down, bank left/right |
+| Right stick left/right | Turn | Roll |
+| Right stick up | Stand | Thrust |
+| Right stick down | Prone | - |
+| Left stick click | Jump | - |
+| Right stick click | Automap | - |
+| Right A / B | Click / double-click | Click / double-click |
+| Right trigger | Fire weapon | Fire weapon |
+| Left grip (hold) | Free view with the left stick | Free view with the left stick |
+
+Every game hotkey (weapon select, MFD panels, save/load, ...) can also be
+assigned to a controller input; they are unbound by default.
+
 ### 5.2. Building natively in Android Studio
 
 `make apk` always compiles the engine and links the APK inside the
@@ -290,6 +428,13 @@ the same as any other Android Studio project:
    this automatically otherwise, so plain Java/C++ edits under
    `android/app/src/main/` just need another Run/Debug press.
 
+**If a native change genuinely doesn't seem to take effect** even after a
+normal rebuild - `stageEngine` can wrongly report `UP-TO-DATE` for a
+newly-added file under `android/engine-patches/` - run
+`android/force-rebuild.sh` and rebuild. For more visibility than Android
+Studio's collapsed Build panel, run `./gradlew :app:assembleDebug
+--console=plain` from a terminal instead.
+
 ### 5.4. Engine/gl4es patch reference
 
 `android/engine-patches/` (applied to a scratch copy of `engine/`) and
@@ -319,10 +464,14 @@ each one does:
   emulation) for real GLES-native equivalents: a custom `pointSize`
   uniform, a shader-side alpha discard, and native point-sprite
   rasterization.
-- **`05-android-audio-driver.patch`** - forces SDL2's older OpenSL ES
-  audio backend instead of AAudio, because AAudio only allows one open
-  playback device and the engine opens two (cutscene audio plus
-  `Mix_OpenAudio` for SFX/MIDI).
+- **`05-android-audio-driver.patch`** - forces SDL2's OpenSL ES audio
+  backend instead of AAudio via
+  `SDL_SetHintWithPriority(..., SDL_HINT_OVERRIDE)` (so nothing else can
+  take precedence and silently leave AAudio selected), and logs the
+  actual `SDL_GetCurrentAudioDriver()` result right after `SDL_Init()`
+  as a standing on-device diagnostic. Does not by itself fix SFX/MIDI
+  playback - see `16-android-audio-single-device.patch` and README 5.5.3
+  for the actual cause and fix.
 - **`06-android-resize-event.patch`** - makes the engine react to
   `SDL_WINDOWEVENT_RESIZED`, not just `SIZE_CHANGED`, since Android's SDL
   backend only ever sends the former for surface-driven resizes.
@@ -334,13 +483,134 @@ each one does:
   `SDL_SetWindowFullscreen`/`SetWindowSize`/`SetWindowPosition` calls on
   Android, since there's no real desktop-style window to resize and
   calling them desyncs SDL's cached window size from the real surface.
+  Also calls `opengl_resize()` directly in `ChangeScreenSize()`
+  (see README 5.5.6) - skipping `SDL_SetWindowSize()` means no native
+  resize event ever fires on Android to trigger it when the in-game
+  resolution changes, so it would otherwise never re-run there.
 - **`10-android-openxr-cmake.patch`** - wires up the OpenXR loader plus
   EGL as link/include dependencies for the CMake build.
 - **`11-android-openxr-present.patch`** - the core OpenXR present-path
   hook: redirects `SDLDraw()`/`opengl_swap_and_restore()` to submit into
   the XR swapchain (via `xr_frame_begin()`/`xr_frame_end()`) instead of
   the normal window, for both the GL-rendered 3D path and the plain
-  software-composited path (splash screen/cutscenes/menus).
+  software-composited path (splash screen/cutscenes/menus). Also logs
+  once per transition between the two (`INFO("Game rendering active:
+  ...")`) for on-device logcat diagnostics.
+- **`12-android-texture-row-length.patch`** - `OpenGL.cc`'s wall/floor
+  texture upload (`opengl_cache_texture()`/`set_texture()`, only reachable
+  when `gShockPrefs.doUseOpenGL` is true - it defaults `false` in
+  `Prefs.c`, so this path is dormant on Quest by default) sets
+  `GL_UNPACK_ROW_LENGTH` from the original 8-bit source bitmap's row
+  stride (`bm->row`), but the buffer actually uploaded is a separately-
+  allocated RGBA32 conversion of it with its own, unrelated stride. Fixed
+  to use the converted buffer's own pitch instead.
+- **`13-android-swapchain-sync.patch`** - `android_draw_surface_as_quad()`
+  used `glFlush()` after drawing into the swapchain's FBO, which queues
+  the GPU work without waiting for it to finish before
+  `xr_swapchain_release()` hands the image to the OpenXR runtime for
+  cross-process consumption. Changed to `glFinish()`, which blocks until
+  the write has landed. The same gap existed in `xr_overlay.c`'s
+  `xr_overlay_render_and_build_layer()` (the keyboard/menu overlay blit
+  path) and was fixed there directly, no patch needed since that file is
+  first-party.
+- **`14-android-quad-unpack-state.patch`** - fixes the diagonal-banded/
+  skewed corruption in the 3D game view during real gameplay (see README
+  5.5.2). `android_draw_surface_as_quad()`'s `glTexImage2D` upload of the
+  tightly-packed `uiRgba` buffer relied on GL's default unpack state
+  (`GL_UNPACK_ROW_LENGTH`/`GL_UNPACK_ALIGNMENT` at 0/4) instead of setting
+  it explicitly. gl4es implements both client-side and persists whatever
+  was last set across draw calls in the same context, so this upload
+  inherited non-default unpack state left behind elsewhere in the frame
+  and misread every row. Fixed by resetting both to the packed defaults
+  immediately before this upload.
+- **`15-android-audio-error-detail.patch`** - `snd_start_digital()`'s
+  `Mix_OpenAudio()` failure only logged a fixed string, not the actual
+  reason. Adds `SDL_GetError()` to the log line so the next on-device
+  failure reports the real underlying error.
+- **`16-android-audio-single-device.patch`** - fixes SFX/MIDI music not
+  playing (see README 5.5.3). `snd_start_digital()` opened two SDL audio
+  devices: a raw `SDL_OpenAudioDevice()` for cutscene/audiolog audio and
+  a second one via `Mix_OpenAudio()` for SFX/MIDI - SDL's Android audio
+  backends only ever allow one open non-capture device, so the second
+  open always failed. Removes the raw device entirely and feeds cutscene/
+  audiolog PCM into the `Mix_OpenAudio()` device's output instead, via
+  `Mix_SetPostMix()` (mixing in rather than overwriting, so it doesn't
+  silence any SFX/MIDI music playing at the same time). `cutsloop.c`'s
+  and `audiolog.c`'s `SDL_PauseAudioDevice()` calls (no longer meaningful
+  without a dedicated device) are removed; the cutscene-audio-stream
+  pointer swaps they guarded are now protected by `SDL_LockAudio()`/
+  `SDL_UnlockAudio()` instead, since SDL_mixer's audio thread now reads
+  that pointer continuously via the post-mix hook.
+- **`17-android-native-midi-unsupported.patch`** - `NativeMidiInit()` in
+  `MusicDevice.c` has real implementations only under `#ifdef WIN32` and
+  `#elif defined(USE_ALSA)`; on every other platform (Android included)
+  it fell through to `return 0` (success) without ever opening a device,
+  so a `midi-backend` preference of "Native" (see README 5.5.4) played
+  silently forever instead of falling back. Adds an `#else` branch that
+  returns failure and logs a `WARN`, so `InitDecXMI()`'s existing
+  fallback-to-dummy-driver logic actually triggers.
+- **`18-android-opengl-immediate-mode-attribs.patch`** - fixes a black (and,
+  after this patch's first revision, flat-colored/untextured) screen when
+  switching to the OpenGL/3D render mode in-game (see README 5.5.5). Every
+  `glBegin(GL_TRIANGLE_STRIP)`-based draw in `OpenGL.cc` -
+  `opengl_swap_and_restore()`'s screen-composite quad,
+  `opengl_light_tmap()` (every textured wall/floor polygon, via
+  `draw_vertex()`), `opengl_bitmap()` (sprites), and `opengl_draw_poly()`
+  (flat/gouraud polygons, also via `draw_vertex()`) - used
+  `glVertexAttrib2f`/`glVertexAttrib1f`/`glVertex3f` immediate mode to set
+  per-vertex texcoords/light, which gl4es only captures per-vertex for
+  attribute 0 (position); custom attributes end up constant for the whole
+  draw call. Adds `android_imm_begin()`/`android_imm_vertex()`/
+  `android_imm_end()`, a small shared immediate-mode-emulation shim that
+  buffers vertices and flushes them as one real `glDrawArrays()` call, and
+  switches every one of those call sites to it, Android-only. The
+  starfield (`opengl_begin_stars()`/`opengl_draw_star()`/
+  `opengl_end_stars()`, `GL_POINTS` rather than `GL_TRIANGLE_STRIP`, up to
+  `NUM_STARS`=1000 per frame) had the same bug for its per-star brightness
+  and gets its own similarly-shaped `android_stars_begin()`/
+  `android_stars_vertex()`/`android_stars_end()` buffer. Also skips the
+  unconditional `SDL_GL_MakeCurrent(window, context)` call every
+  rendering function in this file had at its top, Android-only - a
+  worthwhile cleanup on its own merits, but *not* the source of the
+  persistent per-frame `GL_INVALID_OPERATION` (1282) logcat spam during
+  3D gameplay that this was first suspected to be (see README 5.5.8 for
+  that bug's actual root cause and fix, in patch 20 below).
+- **`19-android-fix-hackcam-opengl-frame.patch`** - `fr_start_view()`/
+  `fr_send_view()` (`frsetup.c`) called `opengl_start_frame()`/
+  `opengl_end_frame()` again for hack-camera security-monitor renders
+  (which target a private software bitmap, not the GL-backed screen),
+  since `should_opengl_swap()` doesn't exclude them the way
+  `use_opengl()` already does. Adds the same exclusion to both call
+  sites (see README 5.5.8).
+- **`20-android-no-default-framebuffer.patch`** - the actual fix for the
+  persistent per-frame `GL_INVALID_OPERATION` (1282) in README 5.5.8:
+  `opengl_end_frame()`'s `BindFrameBuffer(nullptr)` bind to framebuffer/
+  renderbuffer id 0 has no valid target on Android (real presentation
+  goes through the OpenXR swapchain's own FBOs, set up separately in
+  `xr_swapchain.c`) and is also functionally dead there regardless -
+  skipped entirely, Android-only.
+- **`21-android-config.patch`** - hooks up the persistent JSON config file
+  (see [CONFIG.md](CONFIG.md), `qs_config.c`): one call to
+  `qs_config_load_startup()` in `Shock.c`'s `main()`, right after
+  `LoadPrefs()`, and one check in `sdl_events.c`'s `pump_events()` to drain
+  the custom SDL events the menu's Save/Load Configuration buttons enqueue.
+- **`22-android-screen-profile.patch`** - `mainloop.c` reports every
+  loop-mode change to `qs_screen_profile_notify_loop_mode()`, which picks
+  between the initial-screen and game-screen virtual-screen presets (see
+  [CONFIG.md](CONFIG.md)) and tells the menu whether a game is running.
+- **`23-android-intro-language.patch`** - `cutsloop.c` opens the intro
+  cutscene file for the current language (`svgaintr.res`/`svfrintr.res`/
+  `svgeintr.res`), falling back to English when it isn't installed.
+- **`24-android-cyberspace-query.patch`** - adds `qs_in_cyberspace()` to
+  `mouselook.c`, which `xr_input.c` uses to switch between the on-foot and
+  cyberspace controller actions.
+- **`25-android-cyberspace-analog-scale.patch`** - `movekeys.c` scales the
+  cyberspace pitch and bank strength by `qs_cyber_pitch_scale`/
+  `qs_cyber_bank_scale`, which `xr_input.c` sets from the thumbstick
+  deflection each frame (1.0 for keys and buttons).
+- **`26-android-cheat-refill.patch`** - adds `qs_cheat_refill()` to
+  `hkeyfunc.c`, which tops up health, energy, ammo and items (grenades and
+  drugs the player already holds) for the Cheats tab's unlimited switches.
 
 `android/gl4es-patches/`:
 
@@ -402,6 +672,264 @@ trigger (a single always-nonzero struct field) sits well below the
 project's own layer boundary and doesn't show up in any of the local GL
 state that the menu's own code controls.
 
+#### 5.5.2. Diagonal-banded corruption in the 3D game view
+
+During real 3D gameplay (not menus/splash), the game quad rendered as
+diagonally-banded color noise. Every OpenXR overlay quad (menu, keyboard,
+laser-beam pointers) and the desktop build's software renderer were
+unaffected, narrowing the bug to the one present path gameplay uses that
+those don't: `android_draw_surface_as_quad()` in `engine/src/MacSrc/
+OpenGL.cc`.
+
+**Root cause:** its `glTexImage2D` upload of the tightly-packed `uiRgba`
+conversion buffer relies on GL's default unpack state
+(`GL_UNPACK_ROW_LENGTH`/`GL_UNPACK_ALIGNMENT` at 0/4) instead of setting
+it explicitly. gl4es - the GLES/EGL translation layer this engine's
+desktop-style GL calls go through on Quest - implements both unpack
+parameters in software, manually repacking the source buffer row-by-row
+using whatever stride was last set via `glPixelStorei`, and that state
+persists across draw calls in the same GL context rather than resetting
+per call. During gameplay, this upload inherits non-default unpack state
+left behind elsewhere in the frame and misreads every row - a diagonal
+shear/banding pattern. Menus never trigger it because nothing in the
+menu-only code paths sets a custom unpack stride first.
+
+#### 5.5.3. In-game SFX and MIDI music didn't play
+
+Intro cutscene audio played correctly, but in-game SFX and MIDI/background
+music never played, on-device.
+
+**Root cause:** `snd_start_digital()` in `engine/src/MacSrc/SDLSound.c`
+opened two separate SDL audio devices - a raw `SDL_OpenAudioDevice()`
+call (used for cutscene/movie audio, always succeeded) and a second
+device via `Mix_OpenAudio()` (used for SFX and, via `Mix_HookMusic`,
+MIDI music - always failed, `SDL_GetError()` reporting "Audio device
+already open"). SDL's Android audio backends (both AAudio and OpenSL ES)
+only ever allow one open non-capture device - forcing OpenSL ES instead
+of AAudio (`05-android-audio-driver.patch`) doesn't change this, since
+the restriction isn't backend-specific.
+
+**Fix (`16-android-audio-single-device.patch`):** removed the raw
+`SDL_OpenAudioDevice()` call entirely. Cutscene/audiolog PCM (previously
+delivered via that device's own callback) is now mixed into the single
+`Mix_OpenAudio()` device's output via `Mix_SetPostMix()`, additively
+(`SDL_MixAudioFormat`) rather than overwritten, so SFX/MIDI music
+already mixed into the buffer isn't silenced whenever a cutscene or
+audiolog plays. The stream-pointer swaps in `cutsloop.c`/`audiolog.c`
+that used to be guarded by pausing the now-removed device are guarded by
+`SDL_LockAudio()`/`SDL_UnlockAudio()` instead, since the post-mix hook
+runs continuously on SDL_mixer's own audio thread.
+
+#### 5.5.4. MIDI music silent even after audio otherwise worked
+
+After fixing 5.5.3, SFX and cutscene audio played correctly, but MIDI
+background music was still silent, with logcat showing `Creating native
+MIDI device` instead of `Creating FluidSynth MIDI device`.
+
+**Root cause:** the engine's `midi-backend` preference (`0` = ADLMIDI,
+`1` = Native, `2` = FluidSynth) is persisted in a `prefs.txt` file in the
+app's private storage, which Android retains across every APK
+reinstall/upgrade (only a full uninstall clears it). A stale value of
+`1` (Native) from earlier testing was carried forward through every
+rebuild this whole session. `SetDefaultPrefs()` (`Prefs.c`) does default
+to `2` (FluidSynth) whenever `USE_FLUIDSYNTH` is defined, which it
+always has been for this build - the default was never wrong, only the
+persisted override. `NativeMidiInit()` has no real implementation on
+Android (see `17-android-native-midi-unsupported.patch`), so it silently
+reported success without opening anything.
+
+**Fix:** a full uninstall (not just installing a new build over the old
+one) clears the stale preference, after which MIDI plays correctly.
+`17-android-native-midi-unsupported.patch` additionally makes
+`NativeMidiInit()` report failure on unsupported platforms, so a stale
+"Native" preference falls back to `InitDecXMI()`'s existing dummy-driver
+path (still silent, but with a clear `WARN` in logcat) instead of
+silently reporting success while never opening anything - a much faster
+diagnosis if this ever recurs.
+
+#### 5.5.5. Black, then flat-colored/untextured screen after switching to OpenGL rendering in-game
+
+The engine has a `Ctrl+G`-bound in-game toggle (`toggle_opengl()`,
+`Prefs.c`) that cycles between the plain software renderer and OpenGL
+rendering. On Quest, switching to OpenGL rendering (either mode:
+unfiltered or bilinear) produced a black screen for the 3D view, with
+`OpenGL error: 1282` (`GL_INVALID_OPERATION`) in logcat right at the switch.
+
+**Root cause:** `opengl_swap_and_restore()` draws the offscreen-rendered
+3D view onto a screen-filling quad using `glBegin(GL_TRIANGLE_STRIP)` /
+`glVertexAttrib2f()`/`glVertexAttrib1f()` / `glVertex3f()` immediate
+mode to supply per-vertex texcoords and light. This is exactly the same
+bug already found and fixed for the UI-overlay quad in
+`11-android-openxr-present.patch`'s `android_draw_surface_as_quad()`:
+under gl4es's GLES2 immediate-mode emulation, `glVertexAttrib*()` sets a
+*constant* value for the whole draw call, not a fresh value per vertex
+the way desktop GL's immediate mode does - only attribute 0 (position,
+driven by `glVertex3f`) gets real per-vertex capture. The 3D-view quad
+draw predates that fix and was never updated to match, so it kept using
+the broken pattern.
+
+This patch's first revision only fixed that one quad, which did clear the
+black screen - but the next on-device test showed a "blocky" world
+instead: every wall/floor polygon rendered as a single solid color
+instead of its texture. The same broken immediate-mode pattern turned out
+to be used by every other textured/lit polygon draw in the file too:
+`opengl_light_tmap()` (every textured wall/floor polygon in the 3D view,
+via the shared `draw_vertex()` helper), `opengl_bitmap()` (sprites), and
+`opengl_draw_poly()` (flat/gouraud-shaded polygons, also via
+`draw_vertex()`) - each polygon's texcoord/light attribute ended up
+constant across all of its vertices (whatever was last set), instead of
+varying per vertex, hence the flat, solid-colored blocks.
+
+**Fix:** `18-android-opengl-immediate-mode-attribs.patch` adds
+`android_imm_begin()`/`android_imm_vertex()`/`android_imm_end()`, a small
+shared immediate-mode-emulation shim (buffers vertices, then issues one
+real `glDrawArrays()` call), and switches every glBegin/glVertexAttrib/
+glVertex3f call site above to it, Android-only - the desktop path is
+unaffected and keeps the original immediate-mode code, which works
+correctly under real desktop OpenGL.
+
+The same patch also fixes the starfield
+(`opengl_begin_stars()`/`opengl_draw_star()`/`opengl_end_stars()`), found
+while auditing the file for every other instance of this pattern rather
+than through an on-device symptom: each star is a separate `GL_POINTS`
+vertex with its own brightness set via the same
+`glVertexAttrib1f`/`glVertex3f` immediate-mode pair, so every star drawn
+between one begin/end call would have rendered at whatever brightness was
+set for the last one. Gets its own `android_stars_begin()`/
+`android_stars_vertex()`/`android_stars_end()` buffer, shaped for
+`GL_POINTS` and up to `NUM_STARS` (`GameSrc/rendtool.c`) vertices rather
+than `android_imm_*()`'s small triangle-strip buffer.
+
+#### 5.5.6. Display breaks and stops responding to input after changing resolution in-game
+
+Picking a different resolution from the in-game options menu (e.g.
+`1024x768`) produced a single `OpenGL error: 1282` in logcat and left the
+display frozen on the last frame - `VrApi`'s FPS counter kept running at
+90fps (the OpenXR compositor was still submitting frames), but nothing
+in the menu responded to further input afterward.
+
+**Root cause:** `ChangeScreenSize()` (`ShockBitmap.c`) calls
+`SDL_RenderSetLogicalSize()` to the new resolution and reallocates
+`drawSurface`/`offscreenDrawSurface` accordingly, but on desktop the
+actual GL-side work - `opengl_resize()` in `OpenGL.cc`, which
+(re)creates `backupBuffer` (the offscreen render target the 3D view
+draws into) at the new size - only runs later, from the
+`SDL_WINDOWEVENT_RESIZED`/`SIZE_CHANGED` event that
+`SDL_SetWindowSize()` generates. `09-android-no-window-resize.patch`
+skips that `SDL_SetWindowSize()` call on Android for an unrelated
+reason (see its own entry above) - which also means no such event, and
+therefore no `opengl_resize()` call, ever happens on Android when the
+in-game resolution changes. `backupBuffer` stayed stuck at whatever size
+it was created with at launch while the rest of the game moved on to
+the new resolution, and that mismatch is what broke rendering and left
+the menu unable to correctly hit-test further clicks.
+
+**Fix:** `ChangeScreenSize()` now calls `opengl_resize()` directly on
+Android, right after updating `gScreenWide`/`gScreenHigh` (matching the
+desktop event's actual timing, since `SDL_PollEvent()` always delivers
+it after `ChangeScreenSize()` has already returned) - added to
+`09-android-no-window-resize.patch` since this is a direct, foreseeable
+consequence of that patch's own change, not a new mechanism.
+
+#### 5.5.7. Laser-pointer cursor disappears after changing resolution in-game
+
+After 5.5.6's fix, changing resolution stopped breaking the display, but
+the laser-pointer-driven mouse cursor (see section 5's architecture
+overview) would disappear and stop being able to click anything
+afterward.
+
+**Root cause:** `xr_get_game_resolution()` (`xr_session.c`), which
+`xr_input.c` uses to convert a game-quad ray hit's normalized u,v into
+the pixel coordinates it feeds the engine via `xr_mouse_move()`, returned
+the game quad's OpenXR swapchain's fixed pixel size
+(`g_game_swapchain.width/height`) - set once at launch and never resized.
+`android_draw_surface_as_quad()` (`OpenGL.cc`,
+`11-android-openxr-present.patch`) always stretch-blits `drawSurface` to
+fill that swapchain image via a single full-quad draw, regardless of
+`drawSurface`'s own pixel size, so the swapchain's fixed size has no
+actual relationship to the coordinate space `MouseX`/`MouseY` live in -
+that's `drawSurface`'s own current size (`gScreenWide`/`gScreenHigh`),
+which `ChangeScreenSize()` can change at runtime independently of the
+swapchain. Using the stale swapchain size there mapped every ray hit
+into the wrong coordinate space, moving the mouse position out of the
+engine's actual screen bounds.
+
+**Fix:** `xr_get_game_resolution()` now returns `gScreenWide`/
+`gScreenHigh` instead. `xr_get_game_quad_extent()` (the quad's shape and
+distance in the VR world) is intentionally left as-is, still tied to the
+swapchain's fixed size - that's a real, unchanging property of the
+swapchain image itself, unrelated to this bug.
+
+#### 5.5.8. Persistent `OpenGL error: 1282` logcat spam during 3D gameplay
+
+Every logcat capture during actual 3D gameplay showed a continuous
+stream of `OpenGL error: 1282` (roughly twice per frame) from the one
+pre-existing `glGetError()` check in `opengl_swap_and_restore()`, with
+no visible effect on rendering (textures, resolution changes, and the
+cursor all worked correctly per sections 5.5.5-5.5.7's fixes). 1282 is
+`GL_INVALID_OPERATION` (0x0502) - not `GL_INVALID_ENUM` (0x0500/1280),
+which earlier debugging had mistakenly assumed given the visual
+symptoms resembled the immediate-mode bug in 5.5.5.
+
+Two real, unrelated bugs turned out to be involved, found by adding a
+temporary chain of `glGetError()` checkpoints across the whole
+per-frame render path (`mainloop()` → `render_run()` → `fr_rend()` →
+`fr_prepare_view()`/`fr_start_view()`/`fr_send_view()`) and bisecting
+which ones read clean:
+
+**xrPollEvent() leaves a stray error.** `xr_poll_events()`
+(`xr_session.c`) left gl4es reporting `GL_INVALID_OPERATION` on every
+call while the session is running, regardless of what this app's own
+code does. Fixed by draining it (`while (glGetError() != GL_NO_ERROR)`)
+right after the polling loop.
+
+**A hack-camera render re-entered the OpenXR frame setup.**
+`render_hack_cameras()` (`render.c`) calls `fr_rend()` - and so
+`fr_start_view()`/`fr_send_view()` - a second time per real frame for
+each active security-camera monitor, rendering into a private software
+(`FR_DOUBLEB_MASK`) bitmap rather than the actual GL-backed screen.
+`use_opengl()` already excludes hack-camera/pickup-mode views from the
+GL texture-mapping functions (`FR_PICKUPM_MASK|FR_HACKCAM_MASK`), but
+`should_opengl_swap()` - the separate check gating
+`opengl_start_frame()`/`opengl_end_frame()` in those two functions -
+didn't, so those ran again mid-frame for a render that was never
+GL-backed. `19-android-fix-hackcam-opengl-frame.patch` adds the same
+exclusion to both call sites. This is a genuine bug fixed on its own
+merits, but bisecting further showed it wasn't actually the source of
+the 1282 spam - removing it just relocated the checkpoint that caught
+the error, without changing whether it fired.
+
+**Actual root cause: binding "framebuffer 0" on Android has no valid
+target.** `opengl_end_frame()`'s `BindFrameBuffer(nullptr)` binds
+framebuffer/renderbuffer id 0 to mean "the real window surface" - true
+on desktop, where that's SDL's actual GL window. On Android, this app's
+real presentation target is never that window's own EGL surface at
+all - it's the OpenXR swapchain's per-image FBOs
+(`xr_swapchain_create()`/`xr_swapchain_acquire()`, `xr_swapchain.c`).
+Whatever framebuffer/renderbuffer 0 actually resolves to for gl4es in
+this configuration, binding it reliably set a persistent
+`GL_INVALID_OPERATION` - confirmed by bisecting through the *entire*
+render path with per-call checkpoints, all clean right up until the one
+placed immediately after this exact call. The bind is also functionally
+dead regardless of the error: by the time anything next draws, Shock.c's
+`SDLDraw()` has already run `xr_frame_begin()` →
+`xr_swapchain_acquire()`, which rebinds to that frame's real swapchain
+FBO before `opengl_swap_and_restore()` (the only thing that draws before
+the next `opengl_start_frame()`'s own `BindFrameBuffer(&backupBuffer)`)
+runs - so nothing ever actually renders while framebuffer 0 is bound.
+`20-android-no-default-framebuffer.patch` skips the call on Android
+entirely. Confirmed via logcat: this fully eliminated the error across
+an extended play session with 3D rendering active throughout, with no
+change in what actually renders.
+
+An earlier theory (that the OpenXR runtime's own GL work inside
+`xrAcquireSwapchainImage`/`xrWaitSwapchainImage`/`xrEndFrame` was
+leaving stray driver-level errors on the shared EGL context) prompted a
+dlsym'd, gl4es-bypassing `glGetError()` drain at those call sites. Once
+the above was fixed, testing showed that drain was never actually
+necessary, so it was removed rather than kept as unproven defensive
+code.
+
 ## 6. License
 
 The original tooling in this repository (the Docker build image, build

android/app/build.gradle

@@ -29,9 +29,33 @@ if (prebuiltDir == null) {
 }
 
 // Set by build-apk.sh (see build-image/version.sh, shared with the
-// desktop tarball's versioning) via -PquestshockVersionName/Code. Default
-// here only covers a direct, unsupported `gradlew` invocation.
-def questshockVersionName = project.hasProperty('questshockVersionName') ? project.property('questshockVersionName') : '0.0.0-dev'
+// desktop tarball's versioning) via -PquestshockVersionName/Code. Building
+// directly from Android Studio (the normal day-to-day workflow - see
+// README) never passes that property, so the default below has to carry
+// its own weight rather than just being a fallback for some rare, other,
+// unsupported path: it runs `git describe` itself, the same way
+// engine/CMakeLists.txt's own PROJECT_REVERSION_STRING does for the
+// engine's *own* separate version string - "vX.Y.Z" on a clean tagged
+// commit, or "vX.Y.Z-N-gHASH[-dirty]" otherwise, so a build between
+// releases is still identifiable from the in-headset menu (see
+// MenuOverlay.java's header, which reads BuildConfig.VERSION_NAME).
+def gitDescribeVersionName = {
+    try {
+        def proc = ["git", "-C", projectDir.toString(), "describe", "--tags", "--always", "--dirty"].execute()
+        proc.waitFor()
+        if (proc.exitValue() == 0) {
+            def out = proc.text.trim()
+            if (out) {
+                return out
+            }
+        }
+    } catch (Exception ignored) {
+        // git not on PATH, or this isn't a git checkout at all (e.g. a
+        // source tarball) - fall through to the placeholder below.
+    }
+    return "0.0.0-dev"
+}
+def questshockVersionName = project.hasProperty('questshockVersionName') ? project.property('questshockVersionName') : gitDescribeVersionName()
 def questshockVersionCode = project.hasProperty('questshockVersionCode') ? project.property('questshockVersionCode').toInteger() : 1
 
 // Auto-refreshes the staged, patched engine/ and gl4es-src/ copies and
@@ -80,10 +104,14 @@ def stageEngineTask = tasks.register("stageEngine", Exec) {
     inputs.dir("${projectDir}/../gl4es-src")
     inputs.dir("${projectDir}/../gl4es-patches")
     inputs.file("${repoRoot}/build-image/Dockerfile")
+    // Staged into assets/ by prepare-android-project.sh.
+    inputs.file("${repoRoot}/res/questshock.config.default.json")
+    inputs.dir("${repoRoot}/res/controller_profiles")
     outputs.dir("${repoRoot}/build/android-engine")
     outputs.dir("${repoRoot}/build/android-gl4es")
     outputs.dir("${repoRoot}/build/android-prebuilt")
     outputs.file("${projectDir}/../engine.properties")
+    outputs.dir("${projectDir}/src/main/assets")
 }
 
 // preBuild is what every variant's compile/native-build tasks already
@@ -171,7 +199,7 @@ android {
                     "-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=BOTH", \
                     "-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=BOTH", \
                     "-DCMAKE_SHARED_LINKER_FLAGS=-Wl,-z,max-page-size=16384", \
-                    "-DANDROID_EXTRA_SOURCES=${projectDir}/src/main/cpp/questshock_native.c;${projectDir}/src/main/cpp/xr_session.c;${projectDir}/src/main/cpp/xr_input.c;${projectDir}/src/main/cpp/xr_overlay.c;${projectDir}/src/main/cpp/xr_swapchain.c"
+                    "-DANDROID_EXTRA_SOURCES=${projectDir}/src/main/cpp/questshock_native.c;${projectDir}/src/main/cpp/xr_session.c;${projectDir}/src/main/cpp/xr_input.c;${projectDir}/src/main/cpp/xr_overlay.c;${projectDir}/src/main/cpp/xr_swapchain.c;${projectDir}/src/main/cpp/xr_mouse.c;${projectDir}/src/main/cpp/qs_config.c"
                 abiFilters 'arm64-v8a'
             }
         }
@@ -189,6 +217,13 @@ android {
         }
     }
 
+    // Generates BuildConfig (specifically BuildConfig.VERSION_NAME, read by
+    // MenuOverlay.java's header) - off by default since AGP 8.0, so this
+    // has to be requested explicitly.
+    buildFeatures {
+        buildConfig true
+    }
+
     lint {
         abortOnError false
     }

android/app/src/main/cpp/qs_config.h

@@ -0,0 +1,195 @@
+#ifndef QUESTSHOCK_QS_CONFIG_H
+#define QUESTSHOCK_QS_CONFIG_H
+
+#include <SDL.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Persistent, human-editable JSON config file - see CONFIG.md at the repo
+// root for the documented schema. Lives at a plain relative path
+// ("questshock.config.json") since the whole engine already runs with its
+// cwd chdir()'d to the user-facing /sdcard/questshock/ folder (see
+// QuestShockActivity.java's nativeChdir()) before main() ever runs - the
+// same way prefs.txt/keybinds.txt (Prefs.c) already do.
+//
+// Deliberately independent of prefs.txt: this file is never read or written
+// as a side effect of prefs.txt load/save, and vice versa.
+
+// Parses the config file if it exists (silent no-op if it doesn't - this
+// never creates the file itself) and applies every recognized option
+// directly into gShockPrefs/mode_id. Call once, early in main() - see
+// android/engine-patches/21-android-config.patch - after LoadPrefs() (so the
+// config file can override prefs.txt) and before init_all() (so there's no
+// live-vs-restart distinction to worry about: nothing is initialized yet, so
+// every field takes full effect as part of this same startup).
+void qs_config_load_startup(void);
+
+// Called from the "Save Configuration"/"Load Configuration" button JNI
+// handlers (questshock_native.c), which run on Android's UI thread. These
+// only enqueue a custom SDL event - the actual file I/O and any
+// gShockPrefs/mode_id/message_info() work happens on the engine's own SDL
+// main thread instead (see qs_config_handle_event() below), matching this
+// codebase's existing convention for crossing this exact thread boundary
+// (xr_session.c's xr_poll_events(), questshock_native.c's SDL_TEXTINPUT
+// push for keyboard input).
+void qs_config_request_save(void);
+void qs_config_request_load(void);
+
+// Same cross-thread-dispatch reasoning as qs_config_request_save()/_load()
+// above - called from the Video Options tab's controls (MenuOverlay.java),
+// which are just as much on Android's UI thread as the Save/Load buttons.
+// opengl=true/false selects "opengl"/"software"; resolution_index is 0-4,
+// indexing the same table qs_config_current_resolution_index() below
+// reads. Applies live immediately (no restart involved - see CONFIG.md);
+// unlike Load Configuration, these don't post a message_info() HUD
+// notification for every single tap - the tab's own selection highlight is
+// the feedback.
+void qs_config_request_set_renderer(bool opengl);
+void qs_config_request_set_resolution(int resolution_index);
+
+// Same cross-thread-dispatch reasoning as the two above - called from the
+// Main Menu tab's Language row (MenuOverlay.java). language_index is 0
+// English/1 French/2 German (gShockPrefs.goLanguage's own numbering,
+// Prefs.h). Applies live immediately, the same way the game's own options
+// menu applies a language change (see qs_config.c's qs_apply_language()).
+void qs_config_request_set_language(int language_index);
+
+// Same cross-thread dispatch as the three above - called from the Main Menu
+// tab's "Reset Position" button. Re-anchors the player's position in front of
+// the game quad (see xr_input_reset_player_position()); never reads or writes
+// the config file.
+void qs_config_request_reset_position(void);
+
+// Same cross-thread-dispatch reasoning as the four above - called from the
+// Video Options tab's "Initial Screen"/"Game Screen" width/distance
+// preset rows (MenuOverlay.java). preset_index indexes qs_config.c's own
+// shared, offset+step-generated width/distance preset lists (both in
+// meters; the offset/step themselves are config-file-only, not exposed
+// as buttons), read back via the four qs_config_current_*_screen_*_index()
+// getters below. Applies live immediately if the just-changed profile is
+// the currently active one (see CONFIG.md) - otherwise just updates the
+// stored preference, invisibly, until that profile becomes active (e.g.
+// tweaking "Initial Screen" mid-game).
+void qs_config_request_set_initial_screen_width(int preset_index);
+void qs_config_request_set_initial_screen_distance(int preset_index);
+void qs_config_request_set_game_screen_width(int preset_index);
+void qs_config_request_set_game_screen_distance(int preset_index);
+
+// Cross-thread requests from the Controller Options tab (MenuOverlay.java),
+// enqueued like every request_*() above. action_index indexes
+// xr_input_action_name()'s list. Begin/cancel start and stop rebind capture;
+// reset restores all bindings (the built-in defaults, then
+// questshock.config.default.json's player_controls group if it has one).
+void qs_config_request_begin_control_capture(int action_index);
+void qs_config_request_cancel_control_capture(void);
+void qs_config_request_reset_player_controls(void);
+
+// Called from xr_input.c's xr_input_process_capture() on the engine's own
+// thread, so no cross-thread dispatch is needed (as with
+// qs_screen_profile_notify_loop_mode() below). Resolves
+// MenuOverlay.onControlCaptureResult(int, String) for action_index (raw_name
+// NULL on timeout or cancel), and again for displaced_action_index if the new
+// binding took the input from another action (-1/NULL when none), so both
+// rows can be updated together.
+void qs_config_notify_control_capture_result(int action_index, const char *raw_name,
+                                              int displaced_action_index,
+                                              const char *displaced_raw_name);
+
+// Called from xr_input.c whenever the VR menu's visibility changes. Showing
+// the menu pauses a running game (not the main menu, intro or cutscenes) that
+// is not already paused; hiding it unpauses only if the menu did the pausing.
+// Enqueued like the request_*() functions above; the pause itself runs on the
+// engine's thread at pump_events() time.
+void qs_config_notify_menu_visibility(bool visible);
+
+// Cheats tab (MenuOverlay.java). Same enqueue-only requests as above; the work
+// runs on the engine's thread. cheat_id: 0 give everything, 1 toggle physics,
+// 2 next level, 3 previous level, 4-7 toggle unlimited health, energy, ammo,
+// items (grenades and drugs). Cheats need a running game (the unlimited
+// switches can be set anywhere). The getters are plain scalar reads, safe from
+// the UI thread; the unlimited mask has bit 0 health, 1 energy, 2 ammo, 3 items.
+void qs_config_request_cheat(int cheat_id);
+int qs_config_cheat_unlimited_mask(void);
+bool qs_config_cheat_physics_running(void);
+
+// Called once per frame from xr_input.c on the engine's thread; applies the
+// unlimited-resource cheats that are switched on.
+void qs_config_frame_tick(void);
+
+// Called from xr_input.c's xr_input_suggest_bindings() when the OpenXR runtime
+// rejects a supported interaction profile's suggested bindings at startup.
+// That is an app bug, not a config problem, so it shows
+// MenuOverlay.showFatalControllerBindingError()'s non-cancelable "Exit" dialog;
+// xr_input_init() aborts right after.
+void qs_config_report_fatal_input_error(const char *profile_display_name);
+
+// Returns true and handles the event if it is one of the custom events the
+// request_*()/notify functions above enqueue. Called from pump_events()
+// (sdl_events.c, see android/engine-patches/21-android-config.patch) on the
+// engine's thread, once per polled event. Returns false for any other event
+// type, including before the custom types are registered.
+bool qs_config_handle_event(const SDL_Event *event);
+
+// Called directly (no event-queue dispatch - see
+// android/engine-patches/22-android-screen-profile.patch and this
+// function's own definition in qs_config.c for why) from the engine's
+// mainloop.c whenever the loop mode changes, and once from
+// qs_config_load_startup() - picks between the "Initial Screen" (menu/
+// intro) and "Game Screen" (actual gameplay) presets based on new_mode
+// (mainloop.h's SETUP_LOOP/CUTSCENE_LOOP vs. everything else) and applies
+// the newly-active one's shape to xr_session.c, but only if it's actually
+// different from what was already active.
+void qs_screen_profile_notify_loop_mode(short new_mode);
+
+// Read-only queries for the Video Options tab's own selection highlight
+// (MenuOverlay.java re-reads these whenever the tab is (re)shown, so it
+// reflects the live value even if it was last changed some other way, e.g.
+// the Ctrl+G hotkey or Load Configuration). Safe to call directly from
+// Android's UI thread despite not going through the event-queue dispatch
+// the mutating calls above use - same low-risk reasoning already used for
+// Save Configuration's own reads of gShockPrefs/mode_id: these are simple,
+// independent POD scalar reads, not a sequence that needs to be atomic
+// with anything else.
+bool qs_config_current_renderer_is_opengl(void);
+int qs_config_current_resolution_index(void);
+
+// -1 (not just an unlikely fallback, a routine, expected result here -
+// unlike qs_config_current_resolution_index() above) if the profile's
+// current value doesn't exactly match one of qs_config.c's own
+// offset+step-generated width/distance presets, e.g. after a hand-edited
+// config file sets an in-between value - MenuOverlay.java's own
+// setSelected() naturally shows no button selected in that case, no
+// special-casing needed.
+int qs_config_current_initial_screen_width_index(void);
+int qs_config_current_initial_screen_distance_index(void);
+int qs_config_current_game_screen_width_index(void);
+int qs_config_current_game_screen_distance_index(void);
+
+// Returns the value preset button `index` (0..4) currently shows for the
+// width/distance option - shared by both "Initial Screen" and "Game
+// Screen" columns (their offset/step is config-file-only, not per-profile
+// - see qs_config.c's own comment on the underlying statics), so
+// MenuOverlay.java can label its preset buttons correctly even after a
+// Load Configuration changes the offset/step. Index is clamped into
+// range, not validated - every index 0..4 always has a value.
+float qs_config_screen_width_preset_value(int index);
+float qs_config_screen_distance_preset_value(int index);
+
+// gShockPrefs.goLanguage (0 English/1 French/2 German, Prefs.h) - read by
+// MenuOverlay.java's/KeyboardOverlay.java's periodic header-refresh timer
+// to pick which language's chrome text (Strings.java) to display, so a
+// language change made mid-session via the game's own options menu (or our
+// own Language row, or Load Configuration) is picked up without needing to
+// reopen either panel; also doubles as the Main Menu tab's Language row's
+// own selection highlight, same as qs_config_current_renderer_is_opengl()/
+// qs_config_current_resolution_index() above. Same off-thread-scalar-read
+// reasoning as those two getters.
+int qs_config_current_language(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // QUESTSHOCK_QS_CONFIG_H

android/app/src/main/cpp/questshock_native.c

@@ -4,11 +4,14 @@
 // needs, compiled into the same "main" library as engine/ (see
 // android/engine-patches/01-android-shared-lib.patch's ANDROID_EXTRA_SOURCES)
 // - engine/ itself is never modified.
+#include <ctype.h>
 #include <jni.h>
 #include <unistd.h>
 
 #include <SDL.h>
 
+#include "qs_config.h"
+#include "xr_input.h"
 #include "xr_overlay.h"
 #include "xr_session.h"
 
@@ -20,17 +23,30 @@ Java_de_ladkau_questshock_QuestShockActivity_nativeChdir(JNIEnv *env, jclass cla
 }
 
 // KeyboardOverlay's hand-built on-screen keyboard (see
-// KeyboardOverlay.commitPrintableChar()) has no real Android IME session
-// behind it, so printable characters can't reach the game via Android's
-// usual IME path - instead this builds and pushes an SDL_TEXTINPUT event
-// directly, the same event type/shape SDL's own Android backend pushes for
-// typed text, using only the public SDL_Event/SDL_PushEvent API. The
-// engine's pump_events() (sdl_events.c) only picks up printable characters
-// from this event, not from SDL_KEYDOWN (see handleKeyPress() in
-// KeyboardOverlay.java for why).
+// KeyboardOverlay.handleCharKeyDown()/handleCharKeyUp()) has no real
+// Android IME session behind it, so printable characters can't reach the
+// game via Android's usual IME path - instead this builds and pushes an
+// SDL_TEXTINPUT event directly, the same event type/shape SDL's own
+// Android backend pushes for typed text, using only the public
+// SDL_Event/SDL_PushEvent API. The engine's pump_events() (sdl_events.c)
+// only picks up printable characters from this event, not from
+// SDL_KEYDOWN.
+//
+// pump_events()'s SDL_TEXTINPUT handling sets sshockKeyStates[code] for
+// this character and only ever clears it again on a matching SDL_KEYUP.
+// Any character bound to a continuously-polled motion key (space -> jump,
+// w -> forward, etc., see MacSrc/Prefs.c's default keybinds.txt) is
+// polled every physics tick for as long as that state stays set, exactly
+// like a real held key - so nativeSendPrintableCharDown()/Up() are called
+// from the key button's own ACTION_DOWN/ACTION_UP (see
+// KeyboardOverlay.charKeyTouchListener()), not both at once: pushing the
+// release in the same call as the press would set and clear
+// sshockKeyStates[code] within a single pump_events() call, before the
+// game loop's poll (which runs once per frame, before pump_events - see
+// GameSrc/mainloop.c) ever has a chance to observe the press.
 JNIEXPORT void JNICALL
-Java_de_ladkau_questshock_KeyboardOverlay_nativeSendPrintableChar(JNIEnv *env, jclass clazz,
-                                                                   jchar c) {
+Java_de_ladkau_questshock_KeyboardOverlay_nativeSendPrintableCharDown(JNIEnv *env, jclass clazz,
+                                                                       jchar c) {
     SDL_Event event;
     SDL_zero(event);
     event.type = SDL_TEXTINPUT;
@@ -41,6 +57,23 @@ Java_de_ladkau_questshock_KeyboardOverlay_nativeSendPrintableChar(JNIEnv *env, j
     SDL_PushEvent(&event);
 }
 
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_KeyboardOverlay_nativeSendPrintableCharUp(JNIEnv *env, jclass clazz,
+                                                                     jchar c) {
+    SDL_Event releaseEvent;
+    SDL_zero(releaseEvent);
+    releaseEvent.type = SDL_KEYUP;
+    releaseEvent.key.timestamp = SDL_GetTicks();
+    releaseEvent.key.windowID = 0;
+    releaseEvent.key.state = SDL_RELEASED;
+    releaseEvent.key.repeat = 0;
+    // SDL keycodes for printable characters are the character's own
+    // (lowercased) byte value - see sdl_events.c's own comment on this.
+    releaseEvent.key.keysym.sym = (SDL_Keycode)tolower((unsigned char)c);
+    releaseEvent.key.keysym.mod = KMOD_NONE;
+    SDL_PushEvent(&releaseEvent);
+}
+
 // KeyboardOverlay's title-bar Close button - the keyboard is a fully
 // independent overlay quad from the menu launcher (see xr_overlay.h), so
 // this is the only way to hide it once it's open; the controller's menu
@@ -57,3 +90,199 @@ JNIEXPORT void JNICALL
 Java_de_ladkau_questshock_MenuOverlay_nativeShowKeyboard(JNIEnv *env, jclass clazz) {
     xr_overlay_set_visible(xr_session_get_keyboard_overlay(), true);
 }
+
+// MenuOverlay's "Save Configuration"/"Load Configuration" buttons - see
+// qs_config.h for why these only enqueue an event rather than doing the
+// actual file/engine-state work here directly (this runs on Android's UI
+// thread, not the engine's own).
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSaveConfig(JNIEnv *env, jclass clazz) {
+    qs_config_request_save();
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestLoadConfig(JNIEnv *env, jclass clazz) {
+    qs_config_request_load();
+}
+
+// MenuOverlay's Video Options tab - live-appliable controls, see
+// qs_config.h. Same enqueue-only reasoning as the Save/Load buttons above.
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetRenderer(JNIEnv *env, jclass clazz,
+                                                                jboolean opengl) {
+    qs_config_request_set_renderer(opengl);
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetResolution(JNIEnv *env, jclass clazz,
+                                                                  jint resolutionIndex) {
+    qs_config_request_set_resolution(resolutionIndex);
+}
+
+// MenuOverlay's Main Menu tab's Language row - same enqueue-only reasoning as above.
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetLanguage(JNIEnv *env, jclass clazz,
+                                                                jint languageIndex) {
+    qs_config_request_set_language(languageIndex);
+}
+
+// MenuOverlay's Main Menu tab's "Reset Position" button - same enqueue-only
+// reasoning as above.
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestResetPosition(JNIEnv *env, jclass clazz) {
+    qs_config_request_reset_position();
+}
+
+// MenuOverlay's Video Options tab - "Initial Screen"/"Game Screen" width/
+// distance preset rows, same enqueue-only reasoning as above.
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetInitialScreenWidth(JNIEnv *env, jclass clazz,
+                                                                          jint presetIndex) {
+    qs_config_request_set_initial_screen_width(presetIndex);
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetGameScreenWidth(JNIEnv *env, jclass clazz,
+                                                                       jint presetIndex) {
+    qs_config_request_set_game_screen_width(presetIndex);
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetInitialScreenDistance(JNIEnv *env,
+                                                                             jclass clazz,
+                                                                             jint presetIndex) {
+    qs_config_request_set_initial_screen_distance(presetIndex);
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestSetGameScreenDistance(JNIEnv *env, jclass clazz,
+                                                                          jint presetIndex) {
+    qs_config_request_set_game_screen_distance(presetIndex);
+}
+
+// Read-only queries - safe to call directly (no enqueue needed, see
+// qs_config.h's own comment on each of these).
+JNIEXPORT jboolean JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetRendererIsOpenGl(JNIEnv *env, jclass clazz) {
+    return qs_config_current_renderer_is_opengl();
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetResolutionIndex(JNIEnv *env, jclass clazz) {
+    return qs_config_current_resolution_index();
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetInitialScreenWidthIndex(JNIEnv *env, jclass clazz) {
+    return qs_config_current_initial_screen_width_index();
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetGameScreenWidthIndex(JNIEnv *env, jclass clazz) {
+    return qs_config_current_game_screen_width_index();
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetInitialScreenDistanceIndex(JNIEnv *env,
+                                                                           jclass clazz) {
+    return qs_config_current_initial_screen_distance_index();
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetGameScreenDistanceIndex(JNIEnv *env, jclass clazz) {
+    return qs_config_current_game_screen_distance_index();
+}
+
+// Preset button *labels* (not the current value) - shared by both
+// "Initial Screen" and "Game Screen" columns, since their offset/step is
+// config-file-only, not per-profile (see qs_config.h's own comment).
+JNIEXPORT jfloat JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetScreenWidthPresetValue(JNIEnv *env, jclass clazz,
+                                                                       jint index) {
+    return qs_config_screen_width_preset_value(index);
+}
+
+JNIEXPORT jfloat JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetScreenDistancePresetValue(JNIEnv *env, jclass clazz,
+                                                                          jint index) {
+    return qs_config_screen_distance_preset_value(index);
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetLanguage(JNIEnv *env, jclass clazz) {
+    return qs_config_current_language();
+}
+
+// MenuOverlay's header - polled on a periodic timer (see its own comment),
+// not event-driven, so these are plain synchronous reads too.
+JNIEXPORT jfloat JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetFps(JNIEnv *env, jclass clazz) {
+    return xr_session_get_fps();
+}
+
+JNIEXPORT jfloat JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetFrameTimeMs(JNIEnv *env, jclass clazz) {
+    return xr_session_get_frame_ms();
+}
+
+JNIEXPORT jfloat JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetCpuUtilization(JNIEnv *env, jclass clazz) {
+    return xr_session_get_cpu_utilization();
+}
+
+JNIEXPORT jfloat JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetGpuUtilization(JNIEnv *env, jclass clazz) {
+    return xr_session_get_gpu_utilization();
+}
+
+// Controller Options tab: actionIndex follows xr_input.c's action order
+// (MenuOverlay.java and Strings.java hold the matching labels).
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestBeginControlCapture(JNIEnv *env, jclass clazz,
+                                                                         jint actionIndex) {
+    qs_config_request_begin_control_capture(actionIndex);
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestCancelControlCapture(JNIEnv *env, jclass clazz) {
+    qs_config_request_cancel_control_capture();
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestResetPlayerControls(JNIEnv *env, jclass clazz) {
+    qs_config_request_reset_player_controls();
+}
+
+JNIEXPORT jstring JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetControlBindingKey(JNIEnv *env, jclass clazz,
+                                                                   jint actionIndex) {
+    return (*env)->NewStringUTF(env, xr_input_get_action_binding_name(actionIndex));
+}
+
+JNIEXPORT jstring JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetActiveInteractionProfilePath(JNIEnv *env,
+                                                                              jclass clazz) {
+    return (*env)->NewStringUTF(env, xr_input_get_active_interaction_profile_path());
+}
+
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeSetControllerOptionsTabOpen(JNIEnv *env, jclass clazz,
+                                                                          jboolean open) {
+    xr_input_set_controller_options_tab_open(open == JNI_TRUE);
+}
+
+// Cheats tab: same enqueue-only pattern as the other requests.
+JNIEXPORT void JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeRequestCheat(JNIEnv *env, jclass clazz, jint cheatId) {
+    qs_config_request_cheat(cheatId);
+}
+
+JNIEXPORT jint JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetCheatUnlimitedMask(JNIEnv *env, jclass clazz) {
+    return qs_config_cheat_unlimited_mask();
+}
+
+JNIEXPORT jboolean JNICALL
+Java_de_ladkau_questshock_MenuOverlay_nativeGetCheatPhysicsRunning(JNIEnv *env, jclass clazz) {
+    return qs_config_cheat_physics_running();
+}

android/app/src/main/cpp/xr_input.h

@@ -1,16 +1,25 @@
 // Controller input for questshock's immersive Quest build: one OpenXR
 // action set (aim pose + trigger click per hand, a menu-toggle button on
-// the left controller) plus ray/quad hit-testing. While neither the menu
-// launcher nor keyboard overlay (see xr_overlay.h, xr_session.c) is
-// visible, this tests against the game quad xr_session.c submits and draws
-// a small reticle where each hand's aim ray crosses it; while either
-// overlay is visible, it tests against that overlay's quad instead (the
-// keyboard is tried first), forwards trigger edges as synthetic touches,
-// and - since neither overlay's own on-quad cursor gives any feedback
-// while the ray is short of actually landing on it - builds a thin,
+// the left controller) plus ray/quad hit-testing. Each hand's ray is
+// tried against the keyboard overlay, then the menu overlay (see
+// xr_overlay.h, xr_session.c), then - only if neither actually claims it
+// this frame (landing on it now, or continuing a touch/drag begun on a
+// previous frame - not merely because that overlay happens to be visible)
+// - the game quad xr_session.c submits, forwarding trigger edges to
+// whichever overlay claims the ray as synthetic touches. The game quad
+// itself acts as a plain desktop-style mouse pointer into the engine's
+// own UI (see xr_mouse.h) - absolute cursor position while the ray hits
+// it, plus a left click on the trigger edge; a pending click there
+// likewise keeps claiming the ray ahead of the keyboard/menu until
+// released, so the eventual mouse-up isn't lost if the ray strays. Since
+// none of the three targets' own feedback (the overlays' on-quad cursor,
+// drawn by their Java views; the engine's own mouse cursor sprite for the
+// game quad) gives any indication while the ray is short of actually
+// landing on something, every claimed target also builds a thin,
 // billboarded laser-beam quad per hand from the controller to wherever
-// the ray currently crosses that overlay's plane (see
-// xr_input_get_beam_layer()).
+// the ray currently crosses that target's plane (see
+// xr_input_get_beam_layer()) - so aiming looks and behaves the same
+// whether the target is an overlay or the game quad itself.
 #ifndef QUESTSHOCK_XR_INPUT_H
 #define QUESTSHOCK_XR_INPUT_H
 
@@ -38,17 +47,18 @@ bool xr_input_init(XrInstance instance, XrSession session, int64_t swapchain_for
 // Call once per frame from xr_frame_end(), before releasing the acquired
 // swapchain image - syncs this frame's action states (always, so edge
 // detection stays correct even on frames with nothing to draw), handles
-// the menu_toggle button's edge, and either draws a game-quad reticle or
-// forwards menu-quad touches, per the menu's current visibility (see the
-// file comment above). draw gates only the reticle - if false (nothing to
-// draw into this frame, e.g. no swapchain image was acquired), hit-testing
-// and touch-forwarding still run. baseSpace/time must match whatever
+// the menu_toggle button's edge, and hit-tests/dispatches each hand's ray
+// against keyboard/menu/game quad in that priority order (see the file
+// comment above). draw gates only the laser-beam visuals (and the
+// head-pose locate that feeds them) - if false (nothing to draw into this
+// frame, e.g. no swapchain image was acquired), hit-testing and
+// touch-forwarding still run. baseSpace/time must match whatever
 // xr_frame_begin() used to predict this frame.
 void xr_input_sync_and_draw(XrSpace baseSpace, XrTime time, bool draw);
 
 // Call once per hand (hand: 0=left, 1=right) after xr_input_sync_and_draw()
-// in the same frame - if that hand's ray claimed the keyboard or menu
-// overlay this frame (see the file comment above), fills *out_quad's
+// in the same frame - if that hand's ray claimed the keyboard, menu, or
+// game quad this frame (see the file comment above), fills *out_quad's
 // subImage/pose/size for its laser-beam ribbon and returns true.
 // space/eyeVisibility/layerFlags are left for the caller to set, same
 // convention as xr_overlay_render_and_build_layer(). Returns false
@@ -56,6 +66,85 @@ void xr_input_sync_and_draw(XrSpace baseSpace, XrTime time, bool draw);
 // frame.
 bool xr_input_get_beam_layer(int hand, XrCompositionLayerQuad *out_quad);
 
+// Recenters the player so the game quad ("virtual screen") appears directly
+// ahead of wherever they are standing and facing, from their current real head
+// pose. Never reads or writes questshock.config.json. Called automatically
+// once, from xr_input_sync_and_draw(), on the first frame with a valid head
+// pose after startup, unless a complete saved player_position was loaded (see
+// xr_input_skip_startup_recenter()): a saved position is relative to a
+// previous session's real-space origin, which is not stable across launches.
+// Returns false (no-op) if no valid head pose is available yet.
+bool xr_input_recenter_player_to_screen(void);
+
+// The Main Menu tab's "Reset Position" button (via qs_config.c). Like
+// xr_input_recenter_player_to_screen(), but re-anchors only the player's
+// position to the centre in front of the game quad; the current facing (yaw)
+// is kept, so the screen does not rotate to follow the gaze. Returns false
+// (no-op) if no valid head pose is available yet.
+bool xr_input_reset_player_position(void);
+
+// Called once, from qs_config_load_startup() (qs_config.c), when a
+// complete saved player_position was actually loaded from
+// questshock.config.json - cancels the pending automatic startup recenter
+// above so it doesn't immediately override the value that was just
+// applied. Safe to call regardless of whether xr_input_init() has even run
+// yet (this only touches the plain file-local flag, no XR calls).
+void xr_input_skip_startup_recenter(void);
+
+// ===========================================================================
+// Remappable controls ("player_controls" config group; see qs_config.c and
+// CONFIG.md). menu_toggle is not among them and has no getter/setter: it is
+// fixed (see xr_input_sync_and_draw()).
+// ===========================================================================
+
+// Number of remappable actions and each one's index<->name mapping, which
+// qs_config.c uses to parse/write the player_controls group without its own
+// copy of the list. The names are the keys used in questshock.config.json;
+// index_from_name() returns false for an unrecognized name.
+int xr_input_action_count(void);
+const char *xr_input_action_name(int action_index);
+bool xr_input_action_index_from_name(const char *name, int *out_index);
+
+// Current binding for one action, as an opaque int and as its string form
+// (e.g. "right_b", "trigger", "none" for unbound), the same strings used in
+// questshock.config.json and reported by capture.
+int xr_input_get_action_binding(int action_index);
+const char *xr_input_get_action_binding_name(int action_index);
+
+// Sets one action's binding from a config-file string. Returns false (binding
+// unchanged) for an unrecognized name, or for the symmetric "trigger"/
+// "squeeze" on an action other than mouse_click/mouse_double_click. Does not
+// enforce one-action-per-input the way capture does: a hand-edited file that
+// binds two actions to one input is accepted as-is.
+bool xr_input_set_action_binding(int action_index, const char *raw_name);
+
+// Restores every action to its built-in default (the table xr_input_init()
+// starts from). qs_config.c calls this first for "Reset to Defaults", then
+// applies questshock.config.default.json's player_controls group on top if it
+// has one.
+void xr_input_reset_player_controls(void);
+
+// Begins/cancels rebind capture for one action (an index into
+// xr_input_action_name()'s list): the next fresh button or thumbstick-direction
+// edge on any hand becomes that action's binding and is reported via
+// qs_config_notify_control_capture_result(); with no press, capture cancels
+// after 8 seconds. Called via qs_config.c's cross-thread request functions.
+// The menu button is never captured.
+void xr_input_capture_begin(int action_index);
+void xr_input_capture_cancel(void);
+
+// The OpenXR interaction profile currently bound (e.g.
+// "/interaction_profiles/oculus/touch_controller"), refreshed once per frame.
+// MenuOverlay.java's Controller Options tab uses it to pick a file from
+// controller_profiles/ (see CONFIG.md). Empty until the first successful
+// query.
+const char *xr_input_get_active_interaction_profile_path(void);
+
+// Set by MenuOverlay.java when the Controller Options tab becomes or stops
+// being the menu's current tab. While it is open, the menu's thumbstick
+// locomotion (snap turn/smooth move) is disabled.
+void xr_input_set_controller_options_tab_open(bool open);
+
 void xr_input_shutdown(void);
 
 #ifdef __cplusplus

android/app/src/main/cpp/xr_mouse.c

@@ -0,0 +1,20 @@
+#include "xr_mouse.h"
+
+#include <SDL.h>
+
+#include "mouse.h" // engine/src/Libraries/INPUT/Source/mouse.h - mouse_put_xy()
+
+void xr_mouse_move(int x, int y) { mouse_put_xy((short)x, (short)y); }
+
+void xr_mouse_click(bool down) {
+    SDL_Event event;
+    SDL_zero(event);
+    event.type = down ? SDL_MOUSEBUTTONDOWN : SDL_MOUSEBUTTONUP;
+    event.button.timestamp = SDL_GetTicks();
+    event.button.windowID = 0;
+    event.button.which = 0;
+    event.button.button = SDL_BUTTON_LEFT;
+    event.button.state = down ? SDL_PRESSED : SDL_RELEASED;
+    event.button.clicks = 1;
+    SDL_PushEvent(&event);
+}

android/app/src/main/cpp/xr_mouse.h

@@ -0,0 +1,36 @@
+// Bridges VR aim-ray hit-testing (xr_input.c) to the vendored engine's
+// mouse input (engine/src/Libraries/INPUT/Source/mouse.h) - lets the
+// controller's laser pointer drive the game's own UI (inventory, menus,
+// dialogs) exactly like a desktop mouse: absolute cursor position plus a
+// single left button, no relative/mouselook mode, no right button.
+#ifndef QUESTSHOCK_XR_MOUSE_H
+#define QUESTSHOCK_XR_MOUSE_H
+
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Sets the engine's absolute mouse position (mouse_put_xy()) - call every
+// frame the aim ray is actually hitting the game quad; x/y are pixel
+// coordinates in the game's own logical resolution (see
+// xr_get_game_resolution() in xr_session.h), already clamped by the
+// caller. Do not call on frames the ray isn't hitting the game quad - the
+// cursor should hold its last position, not snap elsewhere.
+void xr_mouse_move(int x, int y);
+
+// Pushes a synthetic SDL_MOUSEBUTTONDOWN/UP (SDL_BUTTON_LEFT) - matches
+// KeyboardOverlay's nativeSendPrintableCharDown()/Up() in
+// questshock_native.c: a plain SDL_Event built by hand and handed to the
+// public SDL_PushEvent(),
+// no engine patch needed. pump_events() (sdl_events.c) reads whatever
+// mouse_put_xy() last set, not any x/y carried on the event itself - call
+// xr_mouse_move() first if position needs updating this frame.
+void xr_mouse_click(bool down);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

android/app/src/main/cpp/xr_overlay.c

@@ -1,6 +1,7 @@
 #include "xr_overlay.h"
 
 #include <dlfcn.h>
+#include <math.h>
 #include <stdlib.h>
 #include <string.h>
 
@@ -18,11 +19,33 @@
 #define LOGE(...) __android_log_print(ANDROID_LOG_ERROR, TAG, __VA_ARGS__)
 #define LOGI(...) __android_log_print(ANDROID_LOG_INFO, TAG, __VA_ARGS__)
 
+// Same constant (deliberately not <math.h>'s M_PI, which isn't used
+// anywhere else in this codebase and isn't guaranteed by the C standard -
+// only POSIX) as xr_session.c's own play-space rebuild math.
+#define QS_DEG_TO_RAD (3.14159265358979323846f / 180.0f)
+
 struct XrOverlay {
     XrInstance instance; // for error logging only
     int width, height;
     float distance_m, half_width_m, half_height_m;
     float center_x_m, center_y_m;
+    // The *authored* distance_m (config->distance_m at creation time),
+    // never touched again afterward by anything, including
+    // xr_overlay_set_pose() - kept separate from the live, mutable
+    // distance_m above because that one stops meaning "how far in front of
+    // the origin" once a rotated set_pose() call (the menu recenter)
+    // repurposes it as a raw base-space Z coordinate; reusing *that* as a
+    // "how far in front of me" magnitude on a later recenter would drift
+    // further with every reopen instead of staying at a stable distance -
+    // see xr_overlay_get_default_distance_m().
+    float default_distance_m;
+    // Rotation about the vertical axis, applied on top of center_x_m/
+    // center_y_m/distance_m (see xr_overlay_set_pose()) - 0 for every
+    // overlay except the menu launcher immediately after it's freshly
+    // reopened (xr_input.c re-centers it in front of wherever the player
+    // is currently facing, which needs this to keep the quad actually
+    // facing them instead of whatever direction it started out at).
+    float yaw_deg;
     bool visible;
 
     XrSwapchainState swapchain;
@@ -205,6 +228,7 @@ XrOverlay *xr_overlay_create(XrInstance instance, XrSession session, int64_t swa
     overlay->width = config->width;
     overlay->height = config->height;
     overlay->distance_m = config->distance_m;
+    overlay->default_distance_m = config->distance_m;
     overlay->half_width_m = config->width_m * 0.5f;
     overlay->half_height_m = config->width_m * 0.5f * (float)config->height / (float)config->width;
     overlay->center_x_m = config->default_center_x_m;
@@ -281,9 +305,10 @@ void xr_overlay_set_visible(XrOverlay *overlay, bool visible) {
 bool xr_overlay_is_visible(const XrOverlay *overlay) { return overlay != NULL && overlay->visible; }
 
 void xr_overlay_get_quad_extent(const XrOverlay *overlay, float *center_x_m, float *center_y_m,
-                                 float *distance_m, float *half_width_m, float *half_height_m) {
+                                 float *distance_m, float *half_width_m, float *half_height_m,
+                                 float *yaw_deg) {
     if (overlay == NULL) {
-        *center_x_m = *center_y_m = *distance_m = *half_width_m = *half_height_m = 0.0f;
+        *center_x_m = *center_y_m = *distance_m = *half_width_m = *half_height_m = *yaw_deg = 0.0f;
         return;
     }
     *center_x_m = overlay->center_x_m;
@@ -291,6 +316,7 @@ void xr_overlay_get_quad_extent(const XrOverlay *overlay, float *center_x_m, flo
     *distance_m = overlay->distance_m;
     *half_width_m = overlay->half_width_m;
     *half_height_m = overlay->half_height_m;
+    *yaw_deg = overlay->yaw_deg;
 }
 
 void xr_overlay_set_position(XrOverlay *overlay, float center_x_m, float center_y_m) {
@@ -300,6 +326,20 @@ void xr_overlay_set_position(XrOverlay *overlay, float center_x_m, float center_
     overlay->center_y_m = center_y_m;
 }
 
+void xr_overlay_set_pose(XrOverlay *overlay, float center_x_m, float center_y_m, float distance_m,
+                          float yaw_deg) {
+    if (overlay == NULL)
+        return;
+    overlay->center_x_m = center_x_m;
+    overlay->center_y_m = center_y_m;
+    overlay->distance_m = distance_m;
+    overlay->yaw_deg = yaw_deg;
+}
+
+float xr_overlay_get_default_distance_m(const XrOverlay *overlay) {
+    return overlay == NULL ? 0.0f : overlay->default_distance_m;
+}
+
 void xr_overlay_touch(XrOverlay *overlay, float u, float v, bool down) {
     if (overlay == NULL)
         return;
@@ -427,6 +467,15 @@ bool xr_overlay_render_and_build_layer(XrOverlay *overlay, XrCompositionLayerQua
                             overlay->width, 0, GL_COLOR_BUFFER_BIT, GL_LINEAR);
     real_glBindFramebuffer(GL_READ_FRAMEBUFFER, (GLuint)prevReadFbo);
 
+    // Without this, nothing here waits for the blit to actually finish on
+    // the GPU before xr_swapchain_release() hands the image back to the
+    // compositor - glBlitFramebuffer only queues the copy. A cross-process
+    // consumer reading the image before the driver has finished writing it
+    // is a textbook source of the diagonal-banded/torn corruption seen on
+    // device (see xr_swapchain_acquire()'s counterpart in OpenGL.cc, which
+    // had the same gap).
+    glFinish();
+
     xr_swapchain_release(overlay->instance, &overlay->swapchain);
 
     memset(out_quad, 0, sizeof(*out_quad));
@@ -434,7 +483,17 @@ bool xr_overlay_render_and_build_layer(XrOverlay *overlay, XrCompositionLayerQua
     out_quad->subImage.swapchain = overlay->swapchain.swapchain;
     out_quad->subImage.imageRect.extent.width = overlay->swapchain.width;
     out_quad->subImage.imageRect.extent.height = overlay->swapchain.height;
-    out_quad->pose.orientation.w = 1.0f;
+    // Rotation about the vertical axis only (see the struct field's own
+    // comment) - same R_y(-yaw_deg) quaternion construction as
+    // xr_session.c's own play-space rebuild, for the same reason: this
+    // quad's pose is expressed as "yaw_deg turned from its own local -Z",
+    // so a point/ray in that rotated frame maps back into the (unrotated)
+    // base space by rotating by -yaw_deg.
+    float half = -(overlay->yaw_deg * QS_DEG_TO_RAD) * 0.5f;
+    out_quad->pose.orientation.x = 0.0f;
+    out_quad->pose.orientation.y = sinf(half);
+    out_quad->pose.orientation.z = 0.0f;
+    out_quad->pose.orientation.w = cosf(half);
     out_quad->pose.position.x = overlay->center_x_m;
     out_quad->pose.position.y = overlay->center_y_m;
     out_quad->pose.position.z = -overlay->distance_m;

android/app/src/main/cpp/xr_overlay.h

@@ -58,18 +58,39 @@ void xr_overlay_toggle_visible(XrOverlay *overlay);
 void xr_overlay_set_visible(XrOverlay *overlay, bool visible);
 bool xr_overlay_is_visible(const XrOverlay *overlay);
 
-// Local-space pose/size of the quad, valid regardless of visibility -
-// shared with xr_input.c's ray/quad hit-testing.
+// Base-space pose/size of the quad, valid regardless of visibility - shared
+// with xr_input.c's ray/quad hit-testing. yaw_deg is rotation about the
+// vertical axis (see xr_overlay_set_pose()) - 0 unless something has
+// called that.
 void xr_overlay_get_quad_extent(const XrOverlay *overlay, float *center_x_m, float *center_y_m,
-                                 float *distance_m, float *half_width_m, float *half_height_m);
+                                 float *distance_m, float *half_width_m, float *half_height_m,
+                                 float *yaw_deg);
 
-// Repositions the quad (world-space X/Y offset, same units/space as
+// Repositions the quad (base-space X/Y offset, same units/space as
 // xr_overlay_get_quad_extent()'s center_x_m/center_y_m) - e.g. driven by
 // xr_input.c while the user drags a panel's title bar. Distance from the
-// viewer isn't adjustable this way - only left/right/up/down
-// repositioning, not push/pull.
+// viewer and rotation aren't adjustable this way - only left/right/up/down
+// repositioning, not push/pull or turning - see xr_overlay_set_pose() for
+// that.
 void xr_overlay_set_position(XrOverlay *overlay, float center_x_m, float center_y_m);
 
+// Full reposition: X/Y offset, distance ("push/pull"), and rotation about
+// the vertical axis (degrees, same sign convention as
+// xr_session_set_player_transform()'s yaw_deg) - used by xr_input.c to
+// re-center the menu launcher in front of wherever the player currently
+// is/facing each time it's freshly reopened, unlike
+// xr_overlay_set_position()'s drag-only X/Y-at-fixed-distance-and-facing.
+void xr_overlay_set_pose(XrOverlay *overlay, float center_x_m, float center_y_m, float distance_m,
+                          float yaw_deg);
+
+// The overlay's original, never-mutated distance_m (from XrOverlayConfig at
+// creation time) - unlike xr_overlay_get_quad_extent()'s live distance_m,
+// which xr_overlay_set_pose() repurposes as a raw base-space Z coordinate
+// once any rotation is involved (see xr_overlay_set_pose()'s own comment),
+// this stays a stable "how far in front" magnitude across repeated
+// recenters. 0 for a NULL overlay.
+float xr_overlay_get_default_distance_m(const XrOverlay *overlay);
+
 // Forwards a hit on the quad (in the quad's own 0..1 u/v, top-left origin)
 // to the backing Java view as a synthetic touch down/up.
 void xr_overlay_touch(XrOverlay *overlay, float u, float v, bool down);

android/app/src/main/cpp/xr_session.c

@@ -1,5 +1,7 @@
 #include "xr_session.h"
 
+#include <ctype.h>
+#include <math.h>
 #include <stdlib.h>
 #include <string.h>
 
@@ -24,14 +26,18 @@
 #define LOGE(...) __android_log_print(ANDROID_LOG_ERROR, TAG, __VA_ARGS__)
 #define LOGI(...) __android_log_print(ANDROID_LOG_INFO, TAG, __VA_ARGS__)
 
-// Fixed pose/size for the single game quad - 2m in front of the local space
-// origin, sized to preserve the game's own aspect ratio at a comfortable
-// visual angle. No per-eye view/projection work is needed for a quad layer
-// at all - the compositor handles reprojecting it per eye itself, which is
-// exactly why this milestone doesn't need xrLocateViews or any stereo
-// rendering (see the plan's step A notes).
+// Original, pre-screen-profile-feature default distance for the game
+// screen - 2m in front of the local space origin - now just the initial
+// value of g_screen_distance_m (below) rather than a fixed constant.
+// Width/curve/distance are all configurable (see g_screen_width_m/
+// g_screen_curve_deg/g_screen_distance_m above and CONFIG.md's Video
+// Options "Initial Screen"/"Game Screen" settings), sized to preserve the
+// game's own pixel aspect ratio at whatever physical width is currently
+// configured. No per-eye view/projection work is needed for a quad/
+// cylinder layer at all - the compositor handles reprojecting it per eye
+// itself, which is exactly why this milestone doesn't need xrLocateViews
+// or any stereo rendering (see the plan's step A notes).
 #define QUAD_DISTANCE_METERS 2.0f
-#define QUAD_WIDTH_METERS 1.6f
 
 // The menu launcher (just a "Keyboard" button - see MenuOverlay.java) is
 // small and sits above where the keyboard defaults to; the keyboard keeps
@@ -39,10 +45,22 @@
 // xr_overlay.h) so both can be shown/hidden/dragged separately - deliberately
 // positioned apart by default so they don't start out overlapping.
 #define MENU_JAVA_CLASS "de.ladkau.questshock.MenuOverlay"
-#define MENU_WIDTH 512
-#define MENU_HEIGHT 256
+// 768x800 (was 512x256, then 768x512, then 768x552) - grown to fit the
+// header/tabs/Video Options content added on top of the original single
+// "Keyboard" button, then again to fit the stats ribbon below the tab
+// bar, then again to fit the Video Options tab's screen-size grid; taller
+// in world space too since MENU_WIDTH_METERS (the physical size) stays
+// fixed and height_m is derived from it by aspect ratio (see
+// xr_overlay.c's xr_overlay_init()). Must match MenuOverlay.java's own
+// WIDTH/HEIGHT, and xr_input.c's MENU_TITLE_BAR_V_FRACTION denominator.
+#define MENU_WIDTH 768
+#define MENU_HEIGHT 800
 #define MENU_DISTANCE_METERS 1.3f
-#define MENU_WIDTH_METERS 0.35f
+// Physical size - was 0.35m, too small to read comfortably at
+// MENU_DISTANCE_METERS given how much text the header/tabs/stats ribbon
+// pack in; same pixel resolution (MENU_WIDTH/HEIGHT above) just displayed
+// bigger, not a layout change.
+#define MENU_WIDTH_METERS 0.5f
 #define MENU_DEFAULT_CENTER_X_METERS 0.0f
 #define MENU_DEFAULT_CENTER_Y_METERS 0.15f
 
@@ -58,6 +76,26 @@ static XrInstance g_instance = XR_NULL_HANDLE;
 static XrSystemId g_system_id = XR_NULL_SYSTEM_ID;
 static XrSession g_session = XR_NULL_HANDLE;
 static XrSpace g_local_space = XR_NULL_HANDLE;
+
+// Everything this app submits/locates (game/menu/keyboard/beam quads, hand
+// and head poses) is expressed relative to g_play_space, not g_local_space
+// directly - it's g_local_space translated/rotated by the inverse of the
+// player's own virtual transform (see xr_session_set_player_transform()'s
+// own comment in xr_session.h and xr_session_rebuild_play_space() below),
+// so moving/turning the player moves/turns everything else relative to
+// them without touching any actual pose-building or hit-testing math
+// elsewhere in the app - it's all still "relative to the base space",
+// which just happens to no longer be g_local_space itself.
+static XrSpace g_play_space = XR_NULL_HANDLE;
+static float g_player_x = 0.0f;
+static float g_player_z = 0.0f;
+static float g_player_yaw_deg = 0.0f;
+// Set by xr_session_set_player_transform() (including before xr_init() has
+// even run - see its own comment), cleared once xr_session_rebuild_play_space()
+// actually rebuilds g_play_space from the current x/z/yaw_deg - checked
+// once per frame in xr_frame_end() so a stick held at rest costs nothing.
+static bool g_player_transform_dirty = false;
+
 static XrSessionState g_session_state = XR_SESSION_STATE_UNKNOWN;
 // Distinct from g_session_state - true from a successful xrBeginSession
 // until xrEndSession/loss/exit. Many runtimes only advance the *state*
@@ -79,6 +117,40 @@ static XrTime g_predicted_display_time = 0;
 static bool g_frame_should_render = false;
 static bool g_have_acquired_game_image = false;
 
+// XR_META_performance_metrics support (see xr_session_init_performance_metrics()
+// below) - only present if the runtime advertised it at xrCreateInstance
+// time (checked via xr_instance_extension_supported()), since unlike the
+// two always-required KHR extensions above, this one is a device-capability
+// extra that a build shouldn't hard-depend on.
+static bool g_performance_metrics_supported = false;
+static PFN_xrSetPerformanceMetricsStateMETA g_xrSetPerformanceMetricsStateMETA = NULL;
+static PFN_xrQueryPerformanceMetricsCounterMETA g_xrQueryPerformanceMetricsCounterMETA = NULL;
+// Resolved once, at startup, by string-matching the runtime's own
+// human-readable counter path names (see xr_session_init_performance_metrics())
+// rather than hardcoding the exact path strings the spec defines - a
+// substring match is robust to spec/runtime wording we can't verify without
+// on-device testing. XR_NULL_PATH (0) if no match was found.
+static XrPath g_cpu_utilization_path = XR_NULL_PATH;
+static XrPath g_gpu_utilization_path = XR_NULL_PATH;
+
+// XR_KHR_composition_layer_cylinder support - same "only if the runtime
+// advertised it" reasoning as g_performance_metrics_supported above. If
+// unsupported, the curve is forced to 0 (flat) everywhere regardless of
+// configuration (see xr_get_game_quad_extent()) so the game screen just
+// silently stays flat instead of failing to submit a layer at all.
+static bool g_cylinder_layer_supported = false;
+
+// The game screen's currently-configured shape (see qs_config.c's
+// qs_screen_profile_notify_loop_mode(), which is what actually calls
+// xr_session_set_game_screen_shape() below - this file has no notion of
+// "which profile" is active, only "what shape is current"). Defaults
+// match the game quad's own original, pre-this-feature hardcoded width
+// (1.6m) and lack of curve, so a build that never touches the new config
+// options renders identically to before.
+static float g_screen_width_m = 1.6f;
+static float g_screen_curve_deg = 0.0f;
+static float g_screen_distance_m = QUAD_DISTANCE_METERS;
+
 static bool xr_check(XrResult result, const char *what) {
     if (XR_SUCCEEDED(result))
         return true;
@@ -99,6 +171,106 @@ static PFN_xrVoidFunction xr_get_proc(const char *name) {
     return fn;
 }
 
+// Queried before xrCreateInstance (which is why this takes no instance
+// handle - xrEnumerateInstanceExtensionProperties is one of the few
+// functions that works without one) to decide whether it's safe to add
+// `name` to enabledExtensionNames - passing an unsupported extension there
+// would fail instance creation outright, unlike a missing optional feature
+// discovered afterward.
+static bool xr_instance_extension_supported(const char *name) {
+    uint32_t count = 0;
+    if (!xr_check(xrEnumerateInstanceExtensionProperties(NULL, 0, &count, NULL),
+                  "xrEnumerateInstanceExtensionProperties"))
+        return false;
+    XrExtensionProperties *props = (XrExtensionProperties *)malloc(sizeof(XrExtensionProperties) * count);
+    for (uint32_t i = 0; i < count; i++)
+        props[i].type = XR_TYPE_EXTENSION_PROPERTIES;
+    bool supported = false;
+    if (xr_check(xrEnumerateInstanceExtensionProperties(NULL, count, &count, props),
+                 "xrEnumerateInstanceExtensionProperties")) {
+        for (uint32_t i = 0; i < count; i++) {
+            if (strcmp(props[i].extensionName, name) == 0) {
+                supported = true;
+                break;
+            }
+        }
+    }
+    free(props);
+    return supported;
+}
+
+// Case-insensitively checks whether `needle` occurs anywhere in `haystack` -
+// used to identify a counter path (e.g. ".../device/cpu_utilization_average")
+// by a short, stable substring instead of matching its exact full spelling.
+static bool xr_path_name_contains(const char *haystack, const char *needle) {
+    size_t hlen = strlen(haystack);
+    char lower[256];
+    if (hlen >= sizeof(lower))
+        hlen = sizeof(lower) - 1;
+    for (size_t i = 0; i < hlen; i++)
+        lower[i] = (char)tolower((unsigned char)haystack[i]);
+    lower[hlen] = '\0';
+    return strstr(lower, needle) != NULL;
+}
+
+// Enables XR_META_performance_metrics (if the runtime advertised it - see
+// xr_instance_extension_supported() above) and resolves the CPU/GPU
+// device-utilization counter paths xr_session_update_frame_stats() polls
+// every frame. Called once, right after xrCreateSession succeeds. Leaves
+// g_cpu_utilization_path/g_gpu_utilization_path at XR_NULL_PATH (their
+// getters then report -1.0f) if anything here doesn't pan out - this is a
+// nice-to-have stats display, not something worth failing session bring-up
+// over.
+static void xr_session_init_performance_metrics(void) {
+    if (!g_performance_metrics_supported)
+        return;
+
+    PFN_xrEnumeratePerformanceMetricsCounterPathsMETA enumeratePaths =
+        (PFN_xrEnumeratePerformanceMetricsCounterPathsMETA)xr_get_proc(
+            "xrEnumeratePerformanceMetricsCounterPathsMETA");
+    g_xrSetPerformanceMetricsStateMETA = (PFN_xrSetPerformanceMetricsStateMETA)xr_get_proc(
+        "xrSetPerformanceMetricsStateMETA");
+    g_xrQueryPerformanceMetricsCounterMETA = (PFN_xrQueryPerformanceMetricsCounterMETA)xr_get_proc(
+        "xrQueryPerformanceMetricsCounterMETA");
+    if (enumeratePaths == NULL || g_xrSetPerformanceMetricsStateMETA == NULL ||
+        g_xrQueryPerformanceMetricsCounterMETA == NULL)
+        return;
+
+    XrPerformanceMetricsStateMETA state = {XR_TYPE_PERFORMANCE_METRICS_STATE_META};
+    state.enabled = XR_TRUE;
+    if (!xr_check(g_xrSetPerformanceMetricsStateMETA(g_session, &state),
+                  "xrSetPerformanceMetricsStateMETA"))
+        return;
+
+    uint32_t pathCount = 0;
+    if (!xr_check(enumeratePaths(g_instance, 0, &pathCount, NULL),
+                  "xrEnumeratePerformanceMetricsCounterPathsMETA"))
+        return;
+    XrPath *paths = (XrPath *)malloc(sizeof(XrPath) * pathCount);
+    if (!xr_check(enumeratePaths(g_instance, pathCount, &pathCount, paths),
+                  "xrEnumeratePerformanceMetricsCounterPathsMETA")) {
+        free(paths);
+        return;
+    }
+
+    for (uint32_t i = 0; i < pathCount; i++) {
+        char pathName[256];
+        uint32_t pathNameLen = 0;
+        if (!xr_check(xrPathToString(g_instance, paths[i], sizeof(pathName), &pathNameLen, pathName),
+                      "xrPathToString"))
+            continue;
+        if (g_cpu_utilization_path == XR_NULL_PATH && xr_path_name_contains(pathName, "cpu_utilization"))
+            g_cpu_utilization_path = paths[i];
+        if (g_gpu_utilization_path == XR_NULL_PATH && xr_path_name_contains(pathName, "gpu_utilization"))
+            g_gpu_utilization_path = paths[i];
+    }
+    free(paths);
+
+    LOGI("XR: performance metrics cpu_utilization=%s gpu_utilization=%s",
+         g_cpu_utilization_path != XR_NULL_PATH ? "found" : "not found",
+         g_gpu_utilization_path != XR_NULL_PATH ? "found" : "not found");
+}
+
 // The Android OpenXR loader needs the JavaVM/context before anything else -
 // separate from XR_KHR_android_create_instance below, which only affects
 // xrCreateInstance itself. Skipping this is a common cause of
@@ -133,6 +305,65 @@ static EGLConfig xr_get_current_egl_config(EGLDisplay display, EGLContext contex
     return config;
 }
 
+#define QS_DEG_TO_RAD (3.14159265358979323846f / 180.0f)
+
+// Destroys/recreates g_play_space from g_local_space, offset by the
+// inverse of the player's current virtual transform (g_player_x/z/yaw_deg) -
+// see xr_session_set_player_transform()'s comment in xr_session.h for why
+// this is the inverse rather than the transform itself. Given
+// V = Translate(x, 0, z) * Rotate_Y(yaw_deg) (the player's own transform,
+// "apparent pose in play space = V composed with real pose in local
+// space"), the new space's poseInReferenceSpace must be V's inverse:
+// orientation = Rotate_Y(-yaw_deg), position = Rotate_Y(-yaw_deg) * (-x, 0, -z).
+// Called once, right after g_local_space itself is created (picking up
+// whatever qs_config_load_startup() already seeded before xr_init() ever
+// ran), and once per frame from xr_frame_end() whenever
+// g_player_transform_dirty says the transform actually changed since the
+// last rebuild - a plain stick-at-rest frame costs nothing beyond that one
+// bool check. g_session must already exist.
+static void xr_session_rebuild_play_space(void) {
+    if (g_play_space != XR_NULL_HANDLE) {
+        xrDestroySpace(g_play_space);
+        g_play_space = XR_NULL_HANDLE;
+    }
+
+    float theta = g_player_yaw_deg * QS_DEG_TO_RAD;
+    float half = -theta * 0.5f;
+    float c = cosf(-theta), s = sinf(-theta);
+    float vx = -g_player_x, vz = -g_player_z;
+
+    XrReferenceSpaceCreateInfo spaceInfo = {XR_TYPE_REFERENCE_SPACE_CREATE_INFO};
+    spaceInfo.referenceSpaceType = XR_REFERENCE_SPACE_TYPE_LOCAL;
+    spaceInfo.poseInReferenceSpace.orientation.x = 0.0f;
+    spaceInfo.poseInReferenceSpace.orientation.y = sinf(half);
+    spaceInfo.poseInReferenceSpace.orientation.z = 0.0f;
+    spaceInfo.poseInReferenceSpace.orientation.w = cosf(half);
+    spaceInfo.poseInReferenceSpace.position.x = vx * c + vz * s;
+    spaceInfo.poseInReferenceSpace.position.y = 0.0f;
+    spaceInfo.poseInReferenceSpace.position.z = -vx * s + vz * c;
+    xr_check(xrCreateReferenceSpace(g_session, &spaceInfo, &g_play_space),
+              "xrCreateReferenceSpace(play)");
+
+    g_player_transform_dirty = false;
+}
+
+void xr_session_set_player_transform(float x, float z, float yaw_deg) {
+    g_player_x = x;
+    g_player_z = z;
+    g_player_yaw_deg = yaw_deg;
+    g_player_transform_dirty = true;
+}
+
+void xr_session_get_player_transform(float *x, float *z, float *yaw_deg) {
+    *x = g_player_x;
+    *z = g_player_z;
+    *yaw_deg = g_player_yaw_deg;
+}
+
+XrSpace xr_session_get_local_space(void) { return g_local_space; }
+
+XrTime xr_session_get_predicted_display_time(void) { return g_predicted_display_time; }
+
 static bool xr_create_instance_and_session(int game_width, int game_height) {
     JNIEnv *env = (JNIEnv *)SDL_AndroidGetJNIEnv();
     jobject activity = (jobject)SDL_AndroidGetActivity();
@@ -146,10 +377,26 @@ static bool xr_create_instance_and_session(int game_width, int game_height) {
     if (!xr_initialize_android_loader(vm, activity))
         return false;
 
-    const char *extensions[] = {
+    g_performance_metrics_supported =
+        xr_instance_extension_supported(XR_META_PERFORMANCE_METRICS_EXTENSION_NAME);
+    g_cylinder_layer_supported =
+        xr_instance_extension_supported(XR_KHR_COMPOSITION_LAYER_CYLINDER_EXTENSION_NAME);
+
+    // The two KHR extensions here are always required; the other two are
+    // each independently optional device capabilities (see
+    // g_performance_metrics_supported/g_cylinder_layer_supported's own
+    // comments) - appended only if actually advertised, since listing an
+    // unsupported extension fails xrCreateInstance entirely, not just that
+    // one feature.
+    const char *extensions[4] = {
         XR_KHR_ANDROID_CREATE_INSTANCE_EXTENSION_NAME,
         XR_KHR_OPENGL_ES_ENABLE_EXTENSION_NAME,
     };
+    uint32_t extensionCount = 2;
+    if (g_performance_metrics_supported)
+        extensions[extensionCount++] = XR_META_PERFORMANCE_METRICS_EXTENSION_NAME;
+    if (g_cylinder_layer_supported)
+        extensions[extensionCount++] = XR_KHR_COMPOSITION_LAYER_CYLINDER_EXTENSION_NAME;
 
     XrInstanceCreateInfoAndroidKHR androidInfo = {XR_TYPE_INSTANCE_CREATE_INFO_ANDROID_KHR};
     androidInfo.applicationVM = vm;
@@ -157,7 +404,7 @@ static bool xr_create_instance_and_session(int game_width, int game_height) {
 
     XrInstanceCreateInfo createInfo = {XR_TYPE_INSTANCE_CREATE_INFO};
     createInfo.next = &androidInfo;
-    createInfo.enabledExtensionCount = sizeof(extensions) / sizeof(extensions[0]);
+    createInfo.enabledExtensionCount = extensionCount;
     createInfo.enabledExtensionNames = extensions;
     strncpy(createInfo.applicationInfo.applicationName, "QuestShock",
             XR_MAX_APPLICATION_NAME_SIZE - 1);
@@ -206,6 +453,8 @@ static bool xr_create_instance_and_session(int game_width, int game_height) {
     if (!xr_check(xrCreateSession(g_instance, &sessionInfo, &g_session), "xrCreateSession"))
         return false;
 
+    xr_session_init_performance_metrics();
+
     XrReferenceSpaceCreateInfo spaceInfo = {XR_TYPE_REFERENCE_SPACE_CREATE_INFO};
     spaceInfo.referenceSpaceType = XR_REFERENCE_SPACE_TYPE_LOCAL;
     spaceInfo.poseInReferenceSpace.orientation.w = 1.0f;
@@ -213,6 +462,14 @@ static bool xr_create_instance_and_session(int game_width, int game_height) {
                   "xrCreateReferenceSpace"))
         return false;
 
+    // Picks up whatever qs_config_load_startup() already stored into
+    // g_player_x/z/yaw_deg via xr_session_set_player_transform() before
+    // this function ever ran (that call is pure state, no XR API calls, so
+    // it works fine even this early) - so a saved position is already in
+    // effect from the very first frame, not just after the player first
+    // moves a thumbstick.
+    xr_session_rebuild_play_space();
+
     // Prefer a plain linear 8-bit format over GL_SRGB8_ALPHA8: the source
     // SDL surface pixels are already sRGB-encoded (as ordinary 8-bit image
     // data conventionally is) and get uploaded/sampled as plain linear
@@ -319,6 +576,14 @@ void xr_poll_events(void) {
             }
         }
     }
+
+    // xrPollEvent() leaves gl4es reporting a stray GL_INVALID_OPERATION on
+    // every call while the session is running - drain it (looped, since
+    // more than one can accumulate across xrPollEvent()'s possibly-multiple
+    // iterations above) so it doesn't surface as a false positive at the
+    // next unrelated glGetError() check in this app's own rendering code.
+    while (glGetError() != GL_NO_ERROR) {
+    }
 }
 
 bool xr_is_session_running(void) { return g_session_running; }
@@ -346,20 +611,86 @@ bool xr_frame_begin(void) {
     return g_have_acquired_game_image;
 }
 
+// Backs xr_session_get_fps()/get_frame_ms() (see xr_session.h) - exponential
+// smoothing (rather than a plain per-frame instantaneous value) so
+// MenuOverlay's header display doesn't visibly jitter every single frame.
+// Called once per xr_frame_end() that reaches its own end (i.e. once per
+// real XR frame, whether or not the game itself actually rendered anything
+// new into it this frame - matches the OpenXR compositor's own frame
+// cadence, which is what "FPS" means to someone looking at this display).
+static float s_fps = 0.0f;
+static float s_frame_ms = 0.0f;
+static float s_cpu_utilization = -1.0f;
+static float s_gpu_utilization = -1.0f;
+
+// Reads one XR_META_performance_metrics counter (if it was found at
+// startup - see xr_session_init_performance_metrics()) and folds it into
+// *smoothed with the same exponential smoothing as FPS/frame time above.
+// Leaves *smoothed at -1.0f (its "unsupported" sentinel) untouched if the
+// path wasn't found, the query fails, or the runtime didn't mark its
+// floatValue valid this call.
+static void xr_session_update_utilization(XrPath path, float *smoothed) {
+    if (path == XR_NULL_PATH || g_xrQueryPerformanceMetricsCounterMETA == NULL)
+        return;
+    XrPerformanceMetricsCounterMETA counter = {XR_TYPE_PERFORMANCE_METRICS_COUNTER_META};
+    if (!xr_check(g_xrQueryPerformanceMetricsCounterMETA(g_session, path, &counter),
+                  "xrQueryPerformanceMetricsCounterMETA"))
+        return;
+    if (!(counter.counterFlags & XR_PERFORMANCE_METRICS_COUNTER_FLOAT_VALUE_VALID_BIT_META))
+        return;
+    const float kSmoothing = 0.1f;
+    *smoothed =
+        (*smoothed < 0.0f) ? counter.floatValue : *smoothed * (1.0f - kSmoothing) + counter.floatValue * kSmoothing;
+}
+
+static void xr_session_update_frame_stats(void) {
+    static Uint32 s_last_ticks = 0;
+    Uint32 now = SDL_GetTicks();
+    if (s_last_ticks != 0) {
+        Uint32 delta_ms = now - s_last_ticks;
+        if (delta_ms > 0) {
+            float instant_fps = 1000.0f / (float)delta_ms;
+            const float kSmoothing = 0.1f;
+            s_fps = (s_fps == 0.0f) ? instant_fps : s_fps * (1.0f - kSmoothing) + instant_fps * kSmoothing;
+            s_frame_ms =
+                (s_frame_ms == 0.0f) ? (float)delta_ms : s_frame_ms * (1.0f - kSmoothing) + (float)delta_ms * kSmoothing;
+        }
+    }
+    s_last_ticks = now;
+
+    xr_session_update_utilization(g_cpu_utilization_path, &s_cpu_utilization);
+    xr_session_update_utilization(g_gpu_utilization_path, &s_gpu_utilization);
+}
+
+float xr_session_get_fps(void) { return s_fps; }
+
+float xr_session_get_frame_ms(void) { return s_frame_ms; }
+
+float xr_session_get_cpu_utilization(void) { return s_cpu_utilization; }
+
+float xr_session_get_gpu_utilization(void) { return s_gpu_utilization; }
+
 void xr_frame_end(void) {
     if (g_session == XR_NULL_HANDLE)
         return;
 
-    // Draw the laser-pointer reticle into the still-bound game swapchain
-    // framebuffer before releasing it, so it composites on top of whatever
-    // this frame's game content already drew there. Syncing actions
-    // happens even when there's nothing to draw (no acquired image this
-    // frame), so edge detection (trigger/menu-button clicks) doesn't miss a
-    // frame. Only ever draws while neither overlay is visible (see
-    // xr_input.c) - the menu/keyboard render into their own independent
-    // swapchain images below.
+    // Rebuilt before xr_input_sync_and_draw() below so this same frame's
+    // hit-testing and layer submission both see whatever the player's
+    // thumbstick input (or a config-driven "Reset Position"/Load
+    // Configuration) changed last frame - a no-op check on every frame
+    // nothing moved.
+    if (g_player_transform_dirty)
+        xr_session_rebuild_play_space();
+
+    // Syncs actions and hit-tests/dispatches each hand's ray against
+    // keyboard/menu/game quad (see xr_input.c) before the game swapchain
+    // image is released below - this always runs, even when there's
+    // nothing to draw (no acquired image this frame), so edge detection
+    // (trigger/menu-button clicks) doesn't miss a frame. Any resulting
+    // laser-beam quads are submitted as their own composition layers
+    // further down, not drawn into the game swapchain itself.
     if (xr_is_session_running())
-        xr_input_sync_and_draw(g_local_space, g_predicted_display_time,
+        xr_input_sync_and_draw(g_play_space, g_predicted_display_time,
                                 g_have_acquired_game_image);
 
     if (g_have_acquired_game_image)
@@ -368,34 +699,58 @@ void xr_frame_end(void) {
     if (!xr_is_session_running())
         return;
 
-    // Up to 5 layers: the game quad (if a frame was actually rendered),
-    // the menu launcher and keyboard overlays while visible - each gets
-    // its own acquire/render/release cycle against its own swapchain (see
-    // xr_overlay_render_and_build_layer()) any time before xrEndFrame,
-    // unlike the game quad there's no per-frame engine rendering to wrap
-    // around here, just each overlay's own blit - and, per hand, a
-    // laser-beam quad while that hand's ray is aimed at one of those two
-    // overlays (see xr_input_get_beam_layer()).
+    // Up to 5 layers: the game screen (if a frame was actually rendered) -
+    // a flat quad, or a curved cylinder if the currently-active screen
+    // profile has a nonzero curve (see xr_get_game_quad_extent()'s own
+    // comment; xr_input.c's xr_input_try_game_quad() hit-tests whichever
+    // shape is actually submitted here, always agreeing since both read
+    // the same getter) - the menu launcher and keyboard overlays while
+    // visible - each gets its own acquire/render/release cycle against
+    // its own swapchain (see xr_overlay_render_and_build_layer()) any
+    // time before xrEndFrame, unlike the game screen there's no per-frame
+    // engine rendering to wrap around here, just each overlay's own blit -
+    // and, per hand, a laser-beam quad while that hand's ray is aimed at
+    // the keyboard, menu, or the game screen itself (see
+    // xr_input_get_beam_layer()).
+    float gameDistance, gameHalfWidth, gameHalfHeight, gameRadius, gameCentralAngle;
+    xr_get_game_quad_extent(&gameDistance, &gameHalfWidth, &gameHalfHeight, &gameRadius,
+                             &gameCentralAngle);
+    bool gameScreenCurved = gameCentralAngle > 0.0f;
+
     XrCompositionLayerQuad gameQuad = {XR_TYPE_COMPOSITION_LAYER_QUAD};
-    gameQuad.space = g_local_space;
-    gameQuad.eyeVisibility = XR_EYE_VISIBILITY_BOTH;
-    gameQuad.subImage.swapchain = g_game_swapchain.swapchain;
-    gameQuad.subImage.imageRect.extent.width = g_game_swapchain.width;
-    gameQuad.subImage.imageRect.extent.height = g_game_swapchain.height;
-    gameQuad.pose.orientation.w = 1.0f;
-    gameQuad.pose.position.z = -QUAD_DISTANCE_METERS;
-    gameQuad.size.width = QUAD_WIDTH_METERS;
-    gameQuad.size.height =
-        QUAD_WIDTH_METERS * (float)g_game_swapchain.height / (float)g_game_swapchain.width;
+    XrCompositionLayerCylinderKHR gameCylinder = {XR_TYPE_COMPOSITION_LAYER_CYLINDER_KHR};
+    if (gameScreenCurved) {
+        gameCylinder.space = g_play_space;
+        gameCylinder.eyeVisibility = XR_EYE_VISIBILITY_BOTH;
+        gameCylinder.subImage.swapchain = g_game_swapchain.swapchain;
+        gameCylinder.subImage.imageRect.extent.width = g_game_swapchain.width;
+        gameCylinder.subImage.imageRect.extent.height = g_game_swapchain.height;
+        gameCylinder.pose.orientation.w = 1.0f;
+        gameCylinder.pose.position.z = -gameDistance;
+        gameCylinder.radius = gameRadius;
+        gameCylinder.centralAngle = gameCentralAngle;
+        gameCylinder.aspectRatio = (float)g_game_swapchain.width / (float)g_game_swapchain.height;
+    } else {
+        gameQuad.space = g_play_space;
+        gameQuad.eyeVisibility = XR_EYE_VISIBILITY_BOTH;
+        gameQuad.subImage.swapchain = g_game_swapchain.swapchain;
+        gameQuad.subImage.imageRect.extent.width = g_game_swapchain.width;
+        gameQuad.subImage.imageRect.extent.height = g_game_swapchain.height;
+        gameQuad.pose.orientation.w = 1.0f;
+        gameQuad.pose.position.z = -gameDistance;
+        gameQuad.size.width = gameHalfWidth * 2.0f;
+        gameQuad.size.height = gameHalfHeight * 2.0f;
+    }
 
     const XrCompositionLayerBaseHeader *layers[5];
     uint32_t layerCount = 0;
     if (g_have_acquired_game_image)
-        layers[layerCount++] = (XrCompositionLayerBaseHeader *)&gameQuad;
+        layers[layerCount++] = gameScreenCurved ? (XrCompositionLayerBaseHeader *)&gameCylinder
+                                                 : (XrCompositionLayerBaseHeader *)&gameQuad;
 
     XrCompositionLayerQuad menuQuad;
     if (g_frame_should_render && xr_overlay_render_and_build_layer(g_menu_overlay, &menuQuad)) {
-        menuQuad.space = g_local_space;
+        menuQuad.space = g_play_space;
         menuQuad.eyeVisibility = XR_EYE_VISIBILITY_BOTH;
         layers[layerCount++] = (XrCompositionLayerBaseHeader *)&menuQuad;
     }
@@ -403,7 +758,7 @@ void xr_frame_end(void) {
     XrCompositionLayerQuad keyboardQuad;
     if (g_frame_should_render &&
         xr_overlay_render_and_build_layer(g_keyboard_overlay, &keyboardQuad)) {
-        keyboardQuad.space = g_local_space;
+        keyboardQuad.space = g_play_space;
         keyboardQuad.eyeVisibility = XR_EYE_VISIBILITY_BOTH;
         // Lets the keyboard sit on screen translucently while playing
         // rather than fully hiding whatever's behind it - KeyboardOverlay
@@ -423,7 +778,7 @@ void xr_frame_end(void) {
     XrCompositionLayerQuad beamQuad[2];
     for (int hand = 0; hand < 2; hand++) {
         if (xr_input_get_beam_layer(hand, &beamQuad[hand])) {
-            beamQuad[hand].space = g_local_space;
+            beamQuad[hand].space = g_play_space;
             beamQuad[hand].eyeVisibility = XR_EYE_VISIBILITY_BOTH;
             beamQuad[hand].layerFlags = XR_COMPOSITION_LAYER_BLEND_TEXTURE_SOURCE_ALPHA_BIT;
             layers[layerCount++] = (XrCompositionLayerBaseHeader *)&beamQuad[hand];
@@ -435,7 +790,10 @@ void xr_frame_end(void) {
     endInfo.environmentBlendMode = XR_ENVIRONMENT_BLEND_MODE_OPAQUE;
     endInfo.layerCount = layerCount;
     endInfo.layers = layerCount > 0 ? layers : NULL;
+
     xr_check(xrEndFrame(g_session, &endInfo), "xrEndFrame");
+
+    xr_session_update_frame_stats();
 }
 
 void xr_shutdown(void) {
@@ -445,6 +803,10 @@ void xr_shutdown(void) {
         xrDestroySpace(g_local_space);
     g_local_space = XR_NULL_HANDLE;
 
+    if (g_play_space != XR_NULL_HANDLE)
+        xrDestroySpace(g_play_space);
+    g_play_space = XR_NULL_HANDLE;
+
     // Before the session/instance they were created from.
     xr_input_shutdown();
     xr_overlay_destroy(g_menu_overlay);
@@ -462,11 +824,69 @@ void xr_shutdown(void) {
 
     g_session_state = XR_SESSION_STATE_UNKNOWN;
     g_session_running = false;
+
+    g_performance_metrics_supported = false;
+    g_xrSetPerformanceMetricsStateMETA = NULL;
+    g_xrQueryPerformanceMetricsCounterMETA = NULL;
+    g_cpu_utilization_path = XR_NULL_PATH;
+    g_gpu_utilization_path = XR_NULL_PATH;
+
+    g_cylinder_layer_supported = false;
+    // g_screen_width_m/g_screen_curve_deg/g_screen_distance_m deliberately
+    // NOT reset here - same reasoning as xr_session_set_player_transform()'s
+    // own state: it's meant to persist across a shutdown/reinit within the
+    // same process (e.g. an Android lifecycle pause/resume), not just
+    // within one XR session.
 }
 
-void xr_get_game_quad_extent(float *distance_m, float *half_width_m, float *half_height_m) {
-    *distance_m = QUAD_DISTANCE_METERS;
-    *half_width_m = QUAD_WIDTH_METERS * 0.5f;
-    *half_height_m =
-        QUAD_WIDTH_METERS * 0.5f * (float)g_game_swapchain.height / (float)g_game_swapchain.width;
+void xr_session_set_game_screen_shape(float width_m, float curve_deg, float distance_m) {
+    g_screen_width_m = width_m;
+    g_screen_curve_deg = curve_deg;
+    g_screen_distance_m = distance_m;
+}
+
+// Single source of truth for the game screen's current shape, read by
+// both xr_frame_end() (to build/submit the actual layer) and
+// xr_input_try_game_quad() (xr_input.c, to hit-test the laser pointer
+// against it). half_width_m is meaningful only when *central_angle_rad is
+// 0 (flat); a curved screen's horizontal extent is bounded by
+// *central_angle_rad instead, with *half_height_m always the vertical
+// bound either way.
+void xr_get_game_quad_extent(float *distance_m, float *half_width_m, float *half_height_m,
+                              float *radius_m, float *central_angle_rad) {
+    float curveDeg = g_cylinder_layer_supported ? g_screen_curve_deg : 0.0f;
+    float aspect = (float)g_game_swapchain.height / (float)g_game_swapchain.width;
+
+    *distance_m = g_screen_distance_m;
+    *half_width_m = g_screen_width_m * 0.5f;
+    *half_height_m = g_screen_width_m * 0.5f * aspect;
+
+    if (curveDeg > 0.0f) {
+        float theta = curveDeg * QS_DEG_TO_RAD;
+        *central_angle_rad = theta;
+        *radius_m = g_screen_width_m / theta;
+    } else {
+        *central_angle_rad = 0.0f;
+        *radius_m = 0.0f;
+    }
+}
+
+void xr_get_game_resolution(int *width, int *height) {
+    // Not g_game_swapchain.width/height: that's the fixed physical size of
+    // the swapchain image the game is composited into (see xr_init()) -
+    // android_draw_surface_as_quad() (OpenGL.cc, engine-patches/11) always
+    // stretch-blits drawSurface to fill that image regardless of
+    // drawSurface's own pixel size, so the swapchain's size has no relation
+    // to the coordinate space MouseX/MouseY actually live in. gScreenWide/
+    // gScreenHigh (InitMac.h) is drawSurface's current size - the
+    // resolution the in-game options menu can change at runtime
+    // (ShockBitmap.c's ChangeScreenSize()) independently of the swapchain,
+    // which is created once at launch and never resized. Using the fixed
+    // swapchain size here after such a change mapped the laser pointer's
+    // quad-space hit into the wrong coordinate space entirely, moving
+    // MouseX/MouseY out of the engine's actual screen bounds - which is
+    // what made the cursor disappear and become unclickable.
+    extern int32_t gScreenWide, gScreenHigh;
+    *width = gScreenWide;
+    *height = gScreenHigh;
 }

android/app/src/main/cpp/xr_session.h

@@ -62,17 +62,103 @@ bool xr_frame_begin(void);
 // launcher and keyboard overlay quads via xr_overlay_render_and_build_layer()
 // for whichever of them is currently visible, and submits whichever of the
 // three quads actually rendered this frame as composition layers
-// positioned in front of the local reference space's origin, then ends the
-// XR frame.
+// positioned in front of the play space's origin (see
+// xr_session_set_player_transform() above), then ends the XR frame.
 void xr_frame_end(void);
 
 void xr_shutdown(void);
 
-// Local-space geometry of the single game quad xr_frame_end() submits
-// (distance in front of the local space origin, half-width/half-height,
+// Play-space geometry of the single game screen xr_frame_end() submits
+// (distance in front of the play space origin, half-width/half-height,
 // all in meters) - shared with xr_input.c's ray/quad hit-testing so the
-// laser pointer always matches whatever's actually visible.
-void xr_get_game_quad_extent(float *distance_m, float *half_width_m, float *half_height_m);
+// laser pointer always matches whatever's actually visible. *radius_m/
+// *central_angle_rad are 0 when flat, in which case *half_width_m is the
+// horizontal extent; otherwise the screen is a curved cylinder segment
+// and the caller uses *central_angle_rad instead of *half_width_m for the
+// horizontal bound (*half_height_m stays meaningful either way). Curving
+// is currently unused - qs_config.c has no config surface for it - but
+// kept working so it can be re-enabled later.
+void xr_get_game_quad_extent(float *distance_m, float *half_width_m, float *half_height_m,
+                              float *radius_m, float *central_angle_rad);
+
+// Sets the game screen's current physical width (meters) and curve (wrap
+// angle in degrees, 0 = flat) - a plain state setter, no XR calls, same
+// category as xr_session_set_player_transform() above (safe to call
+// before xr_init() has even run). Read by both xr_frame_end() (to build/
+// submit the actual layer) and, via xr_get_game_quad_extent() above,
+// xr_input.c's hit-testing. Driven by qs_config.c's
+// qs_screen_profile_notify_loop_mode(), which decides which of the
+// "Initial Screen"/"Game Screen" config profiles (see CONFIG.md) is
+// currently active - this function itself has no notion of "profiles",
+// only "what shape is current".
+void xr_session_set_game_screen_shape(float width_m, float curve_deg, float distance_m);
+
+// The engine's current screen resolution (gScreenWide/gScreenHigh,
+// InitMac.h) - not the game quad's own swapchain size, which is fixed at
+// launch and never changes - the logical coordinate space xr_input.c needs
+// to convert a game-quad ray hit's normalized u,v into engine mouse
+// coordinates (see xr_mouse.h). Can change at runtime via the in-game
+// options menu (ShockBitmap.c's ChangeScreenSize()), independently of the
+// swapchain.
+void xr_get_game_resolution(int *width, int *height);
+
+// Exponentially-smoothed frame rate/frame time, updated once per real
+// rendered frame in xr_frame_end() - read by MenuOverlay's header (see
+// questshock_native.c's nativeGetFps()/nativeGetFrameTimeMs()). 0 before
+// the second frame has run (nothing to compute a delta from yet).
+float xr_session_get_fps(void);
+float xr_session_get_frame_ms(void);
+
+// Device-wide CPU/GPU utilization percentage (0-100), via the
+// XR_META_performance_metrics extension - same per-frame update cadence as
+// the FPS/frame-time getters above. Returns -1.0f if the extension isn't
+// supported by the runtime, or its cpu_utilization/gpu_utilization counter
+// couldn't be found among the ones it advertises.
+float xr_session_get_cpu_utilization(void);
+float xr_session_get_gpu_utilization(void);
+
+// The player's virtual position/orientation - horizontal-plane only (x/z
+// plus a yaw rotation about the vertical axis); height always comes from
+// the real tracked HMD pose, never from this. Everything the app submits
+// (game/menu/keyboard/beam quads) and every hand/head pose it locates is
+// expressed relative to a second reference space, derived from the real
+// LOCAL space by this transform's inverse (see xr_session.c's own
+// xr_session_rebuild_play_space()) - so changing it moves/turns the player
+// relative to those otherwise-fixed quads, letting them walk up to and
+// square up with the game quad ("virtual screen") without needing any
+// physical room-scale space to do it in.
+//
+// xr_session_set_player_transform() only stores the three floats (no XR
+// calls) - safe to call before xr_init() has even run, which is how
+// qs_config_load_startup() seeds the saved position before the OpenXR
+// session/spaces exist yet (xr_init() picks it up when it creates its own
+// spaces); also used live by xr_input.c's thumbstick locomotion and
+// "Reset Position" recenter (xr_input_recenter_player_to_screen()) and
+// qs_config.c's "Load Configuration", and read back by "Save Configuration"
+// via the getter.
+void xr_session_set_player_transform(float x, float z, float yaw_deg);
+void xr_session_get_player_transform(float *x, float *z, float *yaw_deg);
+
+// The real, physical tracking-origin reference space - used only by
+// xr_input_recenter_player_to_screen() (xr_input.c), which needs the
+// player's CURRENT real head pose (not one already bent through the
+// existing play-space transform - see xr_session_set_player_transform()'s
+// own comment above) to compute a brand new one. Every other consumer in
+// this app (rendering, hit-testing) uses the play space instead - see
+// xr_session_rebuild_play_space()'s own comment for why this one stays a
+// separate, never-swapped-out space.
+XrSpace xr_session_get_local_space(void);
+
+// The most recent xrWaitFrame-predicted display time (xr_frame_begin()'s
+// own g_predicted_display_time) - for the same reason as
+// xr_session_get_local_space() above, xr_input_recenter_player_to_screen()
+// needs a valid XrTime to locate a space with but isn't itself called from
+// the normal per-frame xr_frame_end()/xr_input_sync_and_draw() call chain
+// that already threads one through (it's triggered by a button press,
+// dispatched via qs_config.c's cross-thread event queue instead). A frame
+// or so of staleness doesn't matter for a one-shot recenter. 0 before the
+// first frame has ever begun.
+XrTime xr_session_get_predicted_display_time(void);
 
 #ifdef __cplusplus
 }

android/app/src/main/cpp/xr_swapchain.c

@@ -146,10 +146,10 @@ bool xr_swapchain_acquire(XrInstance instance, XrSwapchainState *state) {
     // gl4es's own (linked, not dlsym'd) bind - this targets an FBO id gl4es
     // itself created (see xr_swapchain_create()), so its own "current FBO"
     // bookkeeping updates correctly and its immediate-mode draw calls
-    // (android_draw_surface_as_quad(), the laser reticle) land in the right
-    // place.
+    // (android_draw_surface_as_quad()) land in the right place.
     glBindFramebuffer(GL_FRAMEBUFFER, state->fbos[imageIndex]);
     glViewport(0, 0, state->width, state->height);
+
     return true;
 }
 

android/app/src/main/java/de/ladkau/questshock/KeyboardOverlay.java

@@ -4,6 +4,7 @@ import android.app.Activity;
 import android.util.TypedValue;
 import android.view.Gravity;
 import android.view.KeyEvent;
+import android.view.MotionEvent;
 import android.view.View;
 import android.view.ViewGroup;
 import android.widget.Button;
@@ -17,13 +18,19 @@ import org.libsdl.app.SDLActivity;
  * The on-screen keyboard quad (see OverlayPanel for the shared off-screen-
  * render/touch/cursor plumbing this builds on) - a hand-built, full
  * US-layout key grid (there's no system IME to borrow once immersive) plus
- * a text field echoing what's been sent. Each key press is forwarded
- * straight to the game as real input (see handleKeyPress()/
- * handleCharKeyPress()) - non-printable keys as an
+ * a text field echoing what's been sent. Every key that reaches the game
+ * (everything but Close/Shift/Ctrl/Alt, which are local UI actions - see
+ * handleKeyDown()/handleKeyUp() and handleCharKeyDown()/handleCharKeyUp())
+ * is driven by that key button's own ACTION_DOWN/ACTION_UP (see
+ * charKeyTouchListener()/controlKeyTouchListener()), which
+ * OverlayPanel.handleTouch() dispatches for exactly as long as the
+ * controller's trigger is physically held while aimed at it - so a key
+ * held on this keyboard behaves like a real key held on a physical one,
+ * not an instant tap. Non-printable keys go through an
  * SDLActivity.onNativeKeyDown()/onNativeKeyUp() pair, the same one a
- * physical Bluetooth keyboard's presses already drive, and printable keys
- * via a synthesized SDL_TEXTINPUT event pushed from native code (see
- * commitPrintableChar()/nativeSendPrintableChar() in questshock_native.c) -
+ * physical Bluetooth keyboard's presses already drive; printable keys go
+ * through a synthesized SDL_TEXTINPUT/SDL_KEYUP pair pushed from native
+ * code (see nativeSendPrintableCharDown()/Up() in questshock_native.c) -
  * except while a Ctrl/Alt "armed" modifier is active, when they go through
  * the same onNativeKeyDown()/onNativeKeyUp() path instead, so the modifier
  * carries across (see toggleModifier()). Shift is a purely local layer
@@ -52,11 +59,12 @@ public class KeyboardOverlay extends OverlayPanel {
     private static final int TYPED_TEXT_HEIGHT = 100;
 
     // Height of the title bar (buildTitleBar()) and width of its Close
-    // button - xr_input.c's TITLE_BAR_V_FRACTION/CLOSE_BUTTON_U_FRACTION
-    // must be kept in sync with these (as fractions of WIDTH/HEIGHT above),
-    // since the drag-handle-vs-Close-button-vs-rest-of-the-keyboard
-    // decision happens entirely on the native side, before a hit ever
-    // reaches this class's own touch dispatch.
+    // button - xr_input.c's KEYBOARD_TITLE_BAR_V_FRACTION/
+    // KEYBOARD_CLOSE_BUTTON_U_FRACTION must be kept in sync with these (as
+    // fractions of WIDTH/HEIGHT above), since the drag-handle-vs-Close-
+    // button-vs-rest-of-the-keyboard decision happens entirely on the
+    // native side, before a hit ever reaches this class's own touch
+    // dispatch.
     private static final int TITLE_BAR_HEIGHT = 90;
     private static final int CLOSE_BUTTON_WIDTH = 160;
 
@@ -69,6 +77,17 @@ public class KeyboardOverlay extends OverlayPanel {
     private TextView typedTextView;
     private final StringBuilder typedText = new StringBuilder();
 
+    // Title bar chrome text - the only pieces of this panel that get
+    // translated (see Strings.java's own comment on why the actual key
+    // labels don't). Set from MenuOverlay.nativeGetLanguage() at the top of
+    // buildContent() (see OverlayPanel's constructor note on why a field a
+    // subclass's buildContent() depends on can't rely on normal field-
+    // initializer timing) and kept in sync afterward by applyTranslations()
+    // below, called from MenuOverlay's own periodic language-refresh check.
+    private int currentLanguage = Strings.ENGLISH;
+    private TextView titleLabel;
+    private Button closeButton;
+
     // Shift is a local-only layer toggle (never itself sent to the game -
     // see updateShiftVisual()); Ctrl/Alt are one-shot "armed" modifiers,
     // sent to the game the moment they're pressed and released again as
@@ -93,9 +112,9 @@ public class KeyboardOverlay extends OverlayPanel {
     // A key whose printed character (and, while unmodified, whose game
     // input) depends on the Shift layer - covers letters, digits, and
     // punctuation uniformly (e.g. 'q'/'Q', '1'/'!', '-'/'_'). androidKeyCode
-    // is only used for the Ctrl/Alt-combo path (see handleCharKeyPress()) -
-    // the unmodified path goes through commitPrintableChar() instead, which
-    // doesn't need an Android keycode at all.
+    // is only used for the Ctrl/Alt-combo path (see handleCharKeyDown()) -
+    // the unmodified path goes through nativeSendPrintableCharDown()/Up()
+    // instead, which doesn't need an Android keycode at all.
     private static final class CharKey {
         final char base;
         final char shifted;
@@ -135,6 +154,7 @@ public class KeyboardOverlay extends OverlayPanel {
     @Override
     protected View buildContent() {
         charKeys = new ArrayList<>();
+        currentLanguage = MenuOverlay.nativeGetLanguage();
 
         LinearLayout panel = new LinearLayout(activity);
         panel.setOrientation(LinearLayout.VERTICAL);
@@ -207,26 +227,31 @@ public class KeyboardOverlay extends OverlayPanel {
     // xr_input.c before a hit ever reaches here) plus a real Close button,
     // which is dispatched as an ordinary click like any other key. Its
     // height and the Close button's width must stay in sync with
-    // xr_input.c's TITLE_BAR_V_FRACTION/CLOSE_BUTTON_U_FRACTION.
+    // xr_input.c's KEYBOARD_TITLE_BAR_V_FRACTION/
+    // KEYBOARD_CLOSE_BUTTON_U_FRACTION.
     private LinearLayout buildTitleBar() {
         LinearLayout bar = new LinearLayout(activity);
         bar.setOrientation(LinearLayout.HORIZONTAL);
-        bar.setBackgroundColor(0xFF3A3A3A);
+        // Matches MenuOverlay's own header bar style.
+        bar.setBackgroundColor(0xFF000080);
 
-        TextView label = new TextView(activity);
-        label.setText("Keyboard  -  drag here to move");
-        label.setTextColor(0xFFFFFFFF);
-        label.setTextSize(TypedValue.COMPLEX_UNIT_SP, 22);
-        label.setGravity(Gravity.CENTER_VERTICAL);
-        label.setPadding(24, 0, 0, 0);
-        bar.addView(label, new LinearLayout.LayoutParams(
+        titleLabel = new TextView(activity);
+        titleLabel.setText(Strings.get("keyboard_drag_title", currentLanguage));
+        titleLabel.setTextColor(0xFFFFFFFF);
+        titleLabel.setTextSize(TypedValue.COMPLEX_UNIT_SP, 20);
+        titleLabel.setGravity(Gravity.CENTER_VERTICAL);
+        titleLabel.setPadding(24, 0, 0, 0);
+        bar.addView(titleLabel, new LinearLayout.LayoutParams(
             0, ViewGroup.LayoutParams.MATCH_PARENT, 1f));
 
-        Button close = new Button(activity);
-        close.setText("Close");
-        close.setOnClickListener(v -> handleKeyPress("Close"));
-        close.setOnTouchListener(CLICK_ON_TOUCH_UP);
-        bar.addView(close,
+        closeButton = new Button(activity);
+        closeButton.setText(Strings.get("close", currentLanguage));
+        closeButton.setOnClickListener(v -> nativeRequestClose());
+        closeButton.setOnTouchListener(CLICK_ON_TOUCH_UP);
+        closeButton.setBackground(buttonBackground());
+        closeButton.setTextColor(buttonTextColors());
+        registerHoverable(closeButton);
+        bar.addView(closeButton,
             new LinearLayout.LayoutParams(CLOSE_BUTTON_WIDTH, ViewGroup.LayoutParams.MATCH_PARENT));
 
         return bar;
@@ -234,9 +259,10 @@ public class KeyboardOverlay extends OverlayPanel {
 
     // Each row fills the panel's remaining height evenly (weight 1 on the
     // row itself). Accepts a mix of String (a fixed-action control key,
-    // handled by handleKeyPress()) and CharKey (a Shift-sensitive character
-    // key, handled by handleCharKeyPress()) per item, so a row can match
-    // real keyboard geometry (e.g. "Tab" followed by a run of CharKeys).
+    // handled by handleKeyDown()/handleKeyUp()) and CharKey (a
+    // Shift-sensitive character key, handled by handleCharKeyDown()/
+    // handleCharKeyUp()) per item, so a row can match real keyboard
+    // geometry (e.g. "Tab" followed by a run of CharKeys).
     // Within a row, CharKeys and most control keys share width equally
     // except Space (wider, like a real keyboard) and Esc/Back/Enter/Tab/
     // Shift/Ctrl/Alt (narrower, see keyWeight()).
@@ -245,13 +271,15 @@ public class KeyboardOverlay extends OverlayPanel {
         row.setOrientation(LinearLayout.HORIZONTAL);
         for (Object item : items) {
             Button key = new Button(activity);
-            key.setOnTouchListener(CLICK_ON_TOUCH_UP);
+            key.setBackground(buttonBackground());
+            key.setTextColor(buttonTextColors());
+            registerHoverable(key);
             float weight;
             if (item instanceof CharKey) {
                 CharKey charKey = (CharKey) item;
                 charKey.button = key;
                 key.setText(charKeyLabel(charKey, shiftActive));
-                key.setOnClickListener(v -> handleCharKeyPress(charKey));
+                key.setOnTouchListener(charKeyTouchListener(charKey));
                 charKeys.add(charKey);
                 // Space is a CharKey too (base == shifted == ' '), but keeps
                 // its traditional wide key like the other control keys do.
@@ -259,8 +287,19 @@ public class KeyboardOverlay extends OverlayPanel {
             } else {
                 String label = (String) item;
                 key.setText(label);
-                key.setOnClickListener(v -> handleKeyPress(label));
                 weight = keyWeight(label);
+                // Shift/Ctrl/Alt are local UI toggles with their own
+                // instantaneous press/release semantics (see
+                // toggleModifier()), not a value forwarded to the game for
+                // as long as the key is held - a plain click is enough.
+                // Every other control key reaches the game and needs real
+                // hold-duration semantics (see controlKeyTouchListener()).
+                if (label.equals("Shift") || label.equals("Ctrl") || label.equals("Alt")) {
+                    key.setOnClickListener(v -> handleToggleKey(label));
+                    key.setOnTouchListener(CLICK_ON_TOUCH_UP);
+                } else {
+                    key.setOnTouchListener(controlKeyTouchListener(label));
+                }
                 if (label.equals("Shift")) {
                     shiftButton = key;
                 } else if (label.equals("Ctrl")) {
@@ -276,6 +315,54 @@ public class KeyboardOverlay extends OverlayPanel {
             ViewGroup.LayoutParams.MATCH_PARENT, 0, 1f));
     }
 
+    // Drives a control key (everything controlKeyCode() maps, i.e. every
+    // key in addRow() except CharKeys and the Shift/Ctrl/Alt toggles) from
+    // its button's own touch lifecycle, so it reaches the game for exactly
+    // as long as the controller's trigger is held on it (see the class
+    // doc). ACTION_CANCEL (the ray straying off the button, or another
+    // overlay claiming it - see xr_input.c) releases the key the same as
+    // ACTION_UP, so a key can never be left stuck down.
+    private View.OnTouchListener controlKeyTouchListener(String label) {
+        return (v, event) -> {
+            switch (event.getAction()) {
+                case MotionEvent.ACTION_DOWN:
+                    v.setPressed(true);
+                    handleKeyDown(label);
+                    break;
+                case MotionEvent.ACTION_UP:
+                    v.setPressed(false);
+                    handleKeyUp(label);
+                    break;
+                case MotionEvent.ACTION_CANCEL:
+                    v.setPressed(false);
+                    handleKeyUp(label);
+                    break;
+            }
+            return true;
+        };
+    }
+
+    // Same as controlKeyTouchListener() above, for a CharKey.
+    private View.OnTouchListener charKeyTouchListener(CharKey key) {
+        return (v, event) -> {
+            switch (event.getAction()) {
+                case MotionEvent.ACTION_DOWN:
+                    v.setPressed(true);
+                    handleCharKeyDown(key);
+                    break;
+                case MotionEvent.ACTION_UP:
+                    v.setPressed(false);
+                    handleCharKeyUp(key);
+                    break;
+                case MotionEvent.ACTION_CANCEL:
+                    v.setPressed(false);
+                    handleCharKeyUp(key);
+                    break;
+            }
+            return true;
+        };
+    }
+
     private static float keyWeight(String label) {
         if (label.equals("Back") || label.equals("Esc") || label.equals("Enter")
                 || label.equals("Tab") || label.equals("Shift") || label.equals("Ctrl")
@@ -310,38 +397,31 @@ public class KeyboardOverlay extends OverlayPanel {
         }
     }
 
-    // "Close" (the title bar's button - see buildTitleBar()) hides this
-    // overlay's quad entirely (see nativeRequestClose()) and never reaches
-    // the game. Shift/Ctrl/Alt are handled separately below (Shift is a
-    // local layer toggle; Ctrl/Alt are one-shot armed modifiers) since
-    // neither sends a plain key event of its own the way every other
-    // control key here does. Everything else (Back/Esc/Enter/Tab/arrows/
-    // F1-F12) is non-printable, so it's forwarded as a real Android key
-    // event via controlKeyCode() above, then releases any armed Ctrl/Alt
-    // modifier (this key just consumed it). This all matters beyond just
-    // the visible typedTextView below: the engine's cutscene skip handler
-    // (cutsloop.c's cutscene_key_handler()) only reacts to Esc/Enter/Space,
-    // so those need to reach the game as actual game input, not just be
-    // echoed locally.
-    private void handleKeyPress(String label) {
-        if (label.equals("Close")) {
-            nativeRequestClose();
-            return;
-        }
+    // Shift is a local layer toggle; Ctrl/Alt are one-shot armed modifiers
+    // (see toggleModifier()) - neither is forwarded to the game as a key of
+    // its own, so a plain click (rather than the hold-duration dispatch
+    // every other key below uses) is enough.
+    private void handleToggleKey(String label) {
         if (label.equals("Shift")) {
             shiftActive = !shiftActive;
             updateShiftVisual();
             return;
         }
-        if (label.equals("Ctrl") || label.equals("Alt")) {
-            toggleModifier(label);
-            return;
-        }
+        toggleModifier(label);
+    }
 
+    // Everything controlKeyCode() maps (Back/Esc/Enter/Tab/arrows/F1-F12)
+    // is non-printable, so it's forwarded as a real Android key event via
+    // that code - down on this key's own ACTION_DOWN, up on ACTION_UP/
+    // CANCEL (see controlKeyTouchListener()), the same down/up split a
+    // physical Bluetooth keyboard's own key events already carry. This all
+    // matters beyond just the visible typedTextView below: the engine's
+    // cutscene skip handler (cutsloop.c's cutscene_key_handler()) only
+    // reacts to Esc/Enter/Space, so those need to reach the game as actual
+    // game input, not just be echoed locally.
+    private void handleKeyDown(String label) {
         int keyCode = controlKeyCode(label);
         SDLActivity.onNativeKeyDown(keyCode);
-        SDLActivity.onNativeKeyUp(keyCode);
-        releaseArmedModifiers();
 
         if (label.equals("Back")) {
             if (typedText.length() > 0) {
@@ -353,31 +433,45 @@ public class KeyboardOverlay extends OverlayPanel {
         typedTextView.setText(typedText.toString());
     }
 
+    private void handleKeyUp(String label) {
+        SDLActivity.onNativeKeyUp(controlKeyCode(label));
+        releaseArmedModifiers();
+    }
+
     // A CharKey's printed character depends only on the Shift layer
     // (updateShiftVisual() keeps its button's label in sync). Which game
     // input it produces depends on whether a modifier is armed: unmodified,
-    // it goes through commitPrintableChar() below like a normal typed
-    // character; with Ctrl/Alt armed, it instead goes through the same
-    // onNativeKeyDown()/onNativeKeyUp() path handleKeyPress() uses for
-    // control keys, since that's the only path that carries
-    // ev.key.keysym.mod through to the engine (sdl_events.c's pump_events()
-    // reads Ctrl/Alt only off that path, never off SDL_TEXTINPUT).
-    private void handleCharKeyPress(CharKey key) {
+    // it goes through nativeSendPrintableCharDown()/Up() below like a
+    // normal typed character; with Ctrl/Alt armed, it instead goes through
+    // the same onNativeKeyDown()/onNativeKeyUp() path handleKeyDown()/
+    // handleKeyUp() use for control keys, since that's the only path that
+    // carries ev.key.keysym.mod through to the engine (sdl_events.c's
+    // pump_events() reads Ctrl/Alt only off that path, never off
+    // SDL_TEXTINPUT).
+    private void handleCharKeyDown(CharKey key) {
         char c = shiftActive ? key.shifted : key.base;
         if (ctrlArmed || altArmed) {
             SDLActivity.onNativeKeyDown(key.androidKeyCode);
-            SDLActivity.onNativeKeyUp(key.androidKeyCode);
-            releaseArmedModifiers();
         } else {
-            commitPrintableChar(c);
+            nativeSendPrintableCharDown(c);
         }
         typedText.append(c);
         typedTextView.setText(typedText.toString());
     }
 
+    private void handleCharKeyUp(CharKey key) {
+        char c = shiftActive ? key.shifted : key.base;
+        if (ctrlArmed || altArmed) {
+            SDLActivity.onNativeKeyUp(key.androidKeyCode);
+            releaseArmedModifiers();
+        } else {
+            nativeSendPrintableCharUp(c);
+        }
+    }
+
     // Ctrl/Alt are "armed" rather than held: pressing one immediately sends
     // its keydown (so SDL's own modifier tracking picks it up for whatever
-    // key comes next - see handleCharKeyPress()/handleKeyPress()) and
+    // key comes next - see handleCharKeyDown()/handleKeyDown()) and
     // brackets its label for feedback; pressing the same key again before
     // it's been used cancels it (sends the matching keyup, un-brackets).
     // The normal case - actually being consumed by the next key press - is
@@ -400,10 +494,10 @@ public class KeyboardOverlay extends OverlayPanel {
         button.setText(nowArmed ? "[" + label + "]" : label);
     }
 
-    // Called after any key actually reaches the game (a control key in
-    // handleKeyPress(), or a CharKey in handleCharKeyPress()) so an armed
-    // Ctrl/Alt only ever applies to the very next key, then releases -
-    // matching a real Ctrl/Alt+key combo's keyup once the combo is done.
+    // Called after any key actually reaches the game (a control key's
+    // handleKeyUp(), or a CharKey's handleCharKeyUp()) so an armed Ctrl/Alt
+    // only ever applies to the very next key, then releases - matching a
+    // real Ctrl/Alt+key combo's keyup once the combo is done.
     private void releaseArmedModifiers() {
         if (ctrlArmed) {
             SDLActivity.onNativeKeyUp(KeyEvent.KEYCODE_CTRL_LEFT);
@@ -429,23 +523,41 @@ public class KeyboardOverlay extends OverlayPanel {
         }
     }
 
-    // Synthesizes the SDL_TEXTINPUT event pump_events() (sdl_events.c)
-    // requires for printable characters (see handleCharKeyPress() above),
-    // by building and pushing it directly in native code (see
-    // nativeSendPrintableChar() in questshock_native.c) rather than through
-    // Android's IME (there's no real IME session behind this off-screen,
+    // Synthesizes the SDL_TEXTINPUT/SDL_KEYUP pair pump_events()
+    // (sdl_events.c) requires for printable characters (see
+    // handleCharKeyDown()/handleCharKeyUp() above), by building and
+    // pushing them directly in native code rather than through Android's
+    // IME (there's no real IME session behind this off-screen,
     // never-attached grid for that plumbing to hook into).
-    private static void commitPrintableChar(char c) {
-        nativeSendPrintableChar(c);
-    }
+    private static native void nativeSendPrintableCharDown(char c);
 
-    private static native void nativeSendPrintableChar(char c);
+    private static native void nativeSendPrintableCharUp(char c);
 
     // Hides this overlay's quad (xr_overlay_set_visible(..., false)) - the
     // only way to do so, since the controller's menu button doesn't affect
     // the keyboard (see this class's doc comment and xr_input.c).
     private static native void nativeRequestClose();
 
+    // Called from MenuOverlay's own periodic header-refresh timer when it
+    // detects the game's language preference changed mid-session (via its
+    // own options menu) - re-labels this panel's title bar chrome to match.
+    // A plain Java call (both classes are in this same package), not JNI -
+    // runOnUiThread() here is defensive/self-documenting more than
+    // strictly needed today, since MenuOverlay's own timer already runs on
+    // the UI thread itself (Activity.runOnUiThread() is a no-op wrapper
+    // when already on that thread).
+    public static void applyTranslations(final int language) {
+        if (instance == null) {
+            return;
+        }
+        instance.activity.runOnUiThread(() -> {
+            instance.currentLanguage = language;
+            instance.titleLabel.setText(Strings.get("keyboard_drag_title", language));
+            instance.closeButton.setText(Strings.get("close", language));
+            instance.redrawContent();
+        });
+    }
+
     // Called from xr_overlay.c's xr_overlay_init_jni(), on the render
     // thread, right after it resolves this class via the activity's own
     // ClassLoader (plain FindClass() can't see app classes from a thread

android/app/src/main/java/de/ladkau/questshock/OverlayPanel.java

@@ -1,13 +1,20 @@
 package de.ladkau.questshock;
 
 import android.app.Activity;
+import android.content.res.ColorStateList;
 import android.graphics.Bitmap;
 import android.graphics.Canvas;
 import android.graphics.Paint;
+import android.graphics.Rect;
+import android.graphics.drawable.ColorDrawable;
+import android.graphics.drawable.Drawable;
+import android.graphics.drawable.StateListDrawable;
 import android.os.SystemClock;
 import android.view.MotionEvent;
 import android.view.View;
 import java.nio.ByteBuffer;
+import java.util.ArrayList;
+import java.util.List;
 
 /**
  * Shared machinery for an off-screen, never-attached-to-a-window View tree
@@ -59,11 +66,59 @@ abstract class OverlayPanel {
         return true;
     };
 
+    // A plain, instantly-drawn StateListDrawable rather than the platform
+    // default Button background (a Material ripple): ripples animate via
+    // continuous invalidation callbacks tied to a real attached window's
+    // vsync, which never fires here (this tree is never attached to a
+    // window) - so setPressed()/setHovered() state changes would otherwise
+    // produce no visible change at all, independent of this project's own
+    // touch handling (which already calls setPressed() correctly - see
+    // CLICK_ON_TOUCH_UP above). Every button this project creates
+    // (MenuOverlay, KeyboardOverlay) should use this (or
+    // MenuOverlay.selectableButtonBackground(), which adds a persistent
+    // "selected" state on top of the same normal/hovered/pressed colors) -
+    // paired with buttonTextColors() below, since the normal/hovered state
+    // is light enough to need dark text while pressed/selected need white.
+    protected static Drawable buttonBackground() {
+        StateListDrawable drawable = new StateListDrawable();
+        drawable.addState(new int[]{android.R.attr.state_pressed}, new ColorDrawable(PRESSED_COLOR));
+        drawable.addState(new int[]{android.R.attr.state_hovered}, new ColorDrawable(HOVERED_COLOR));
+        drawable.addState(new int[]{}, new ColorDrawable(NORMAL_COLOR));
+        return drawable;
+    }
+
+    // See buttonBackground() above - light gray (normal/hovered) needs dark
+    // text; the accent colors (pressed, and MenuOverlay's own "selected"
+    // state) need white. Every button should get both this and
+    // buttonBackground()/selectableButtonBackground() together.
+    protected static ColorStateList buttonTextColors() {
+        return new ColorStateList(
+            new int[][]{
+                new int[]{android.R.attr.state_pressed},
+                new int[]{android.R.attr.state_selected},
+                new int[]{},
+            },
+            new int[]{0xFFFFFFFF, 0xFFFFFFFF, 0xFF202020});
+    }
+
+    protected static final int NORMAL_COLOR = 0xFFC8C8C8;
+    protected static final int HOVERED_COLOR = 0xFFAEC2E8;
+    protected static final int PRESSED_COLOR = 0xFF3355AA;
+
     protected final Activity activity;
     private final int width;
     private final int height;
     private final View root;
 
+    // Views registered via registerHoverable() (every button, from both
+    // buildContent() and any later-added content) - hit-tested against the
+    // cursor position on every updateCursor() call so aiming at (not
+    // clicking) one visibly highlights it via android.R.attr.state_hovered
+    // (a real View state since API 14, paired with buttonBackground()
+    // above).
+    private final List<View> hoverableViews = new ArrayList<>();
+    private View hoveredView = null;
+
     // contentBitmap holds just the panel's own rendered content (no cursor),
     // redrawn only when that content actually changes (redrawContent(), via
     // handleTouch() or a subclass's own key handling) via root.draw() - a
@@ -183,9 +238,95 @@ abstract class OverlayPanel {
         cursorVisible = visible;
         cursorX = x;
         cursorY = y;
+        if (updateHoverState(x, y, visible)) {
+            // redrawContent() (called inside updateHoverState()) already
+            // composited and published this frame's pixels - nothing more
+            // to do.
+            return;
+        }
         compositeAndPublish();
     }
 
+    // Registers a button (or any View) to be hit-tested against the cursor
+    // position - called once per button, alongside buttonBackground()/
+    // setOnTouchListener(), from buildContent() (or any later content
+    // rebuild).
+    protected final void registerHoverable(View view) {
+        hoverableViews.add(view);
+    }
+
+    // Clears whatever's currently hovered without waiting for the cursor to
+    // actually move off of it - call after hiding/showing content (e.g. a
+    // tab switch), since a view that was hovered right before becoming
+    // GONE would otherwise still be internally tracked as hovered (and
+    // wrongly show that way again) if it's later made VISIBLE again before
+    // the cursor position next changes.
+    protected final void resetHover() {
+        if (hoveredView != null) {
+            hoveredView.setHovered(false);
+            hoveredView = null;
+        }
+    }
+
+    // Absolute bounds of view within this panel's own coordinate space
+    // (i.e. relative to root, which is always laid out at (0,0,width,
+    // height) - see the constructor) - View's own getLeft()/getTop() are
+    // parent-relative, so this walks up the parent chain summing them,
+    // additionally subtracting each ancestor's own getScrollX()/getScrollY()
+    // (0 for a plain ViewGroup, non-zero for e.g. a ScrollView - see
+    // MenuOverlay's Controller Options tab) so a view inside a scrolled
+    // container reports its actual on-screen position, not its laid-out one.
+    // Assumes view is actually part of this panel's tree (every registered
+    // view always is, since registerHoverable() is only ever called from
+    // buildContent()).
+    private Rect absoluteBounds(View view) {
+        int left = 0;
+        int top = 0;
+        View current = view;
+        while (true) {
+            left += current.getLeft();
+            top += current.getTop();
+            if (current == root || !(current.getParent() instanceof View)) {
+                break;
+            }
+            View parent = (View) current.getParent();
+            left -= parent.getScrollX();
+            top -= parent.getScrollY();
+            current = parent;
+        }
+        return new Rect(left, top, left + view.getWidth(), top + view.getHeight());
+    }
+
+    // Returns true if the hovered view changed (and so redrawContent() -
+    // which always publishes too - already ran); false if there's nothing
+    // more for updateCursor() to do beyond its own compositeAndPublish().
+    private boolean updateHoverState(float x, float y, boolean visible) {
+        View newHovered = null;
+        if (visible) {
+            for (View candidate : hoverableViews) {
+                if (candidate.getVisibility() != View.VISIBLE) {
+                    continue;
+                }
+                if (absoluteBounds(candidate).contains((int) x, (int) y)) {
+                    newHovered = candidate;
+                    break;
+                }
+            }
+        }
+        if (newHovered == hoveredView) {
+            return false;
+        }
+        if (hoveredView != null) {
+            hoveredView.setHovered(false);
+        }
+        if (newHovered != null) {
+            newHovered.setHovered(true);
+        }
+        hoveredView = newHovered;
+        redrawContent();
+        return true;
+    }
+
     private void handleTouch(float u, float v, boolean down) {
         float x = u * width;
         float y = v * height;

android/app/src/main/java/de/ladkau/questshock/QuestShockActivity.java

@@ -6,8 +6,6 @@ import android.content.Context;
 import android.content.pm.PackageManager;
 import android.content.res.AssetManager;
 import android.os.Bundle;
-import android.os.Handler;
-import android.os.Looper;
 import android.util.Log;
 import android.view.SurfaceHolder;
 import androidx.core.app.ActivityCompat;
@@ -41,7 +39,8 @@ import org.libsdl.app.SDLSurface;
 public class QuestShockActivity extends SDLActivity {
     private static final String TAG = "QuestShock";
     private static final int PERMISSION_REQUEST_STORAGE = 1;
-    private static final String GAME_DIR = "/sdcard/questshock";
+    // Package-visible: MenuOverlay reads controller_profiles/ from here.
+    static final String GAME_DIR = "/sdcard/questshock";
 
     // Loaded here (rather than waiting for SDLActivity's own
     // getLibraries()/loadLibraries(), which only runs from super.onCreate())
@@ -145,11 +144,25 @@ public class QuestShockActivity extends SDLActivity {
         // is already there, assume a previous run already extracted everything.
         File marker = new File(gameDir, "GET_ASSETS_QUEST.txt");
         if (!marker.exists()) {
-            copyAssetDir("shaders", new File(gameDir, "shaders"));
-            copyAssetFile("res/soundfont.sf2", new File(gameDir, "res/soundfont.sf2"));
-            copyAssetFile("GET_ASSETS_QUEST.txt", marker);
+            copyAssetDir("shaders", new File(gameDir, "shaders"), false);
+            copyAssetFile("res/soundfont.sf2", new File(gameDir, "res/soundfont.sf2"), false);
+            copyAssetFile("GET_ASSETS_QUEST.txt", marker, false);
         }
 
+        // Refreshed on every launch (unlike the marker-gated block above) so
+        // it always matches the installed build - qs_config.c reads this as
+        // the initial config only when questshock.config.json doesn't exist
+        // yet, never overwriting a user's own saved config.
+        copyAssetFile("questshock.config.default.json",
+            new File(gameDir, "questshock.config.default.json"), true);
+
+        // Refreshed on every launch. MenuOverlay's Controller Options tab
+        // matches the active OpenXR interaction profile against these files'
+        // "interaction_profile" and shows the paired image (see CONFIG.md).
+        // Only the bundled filenames are overwritten, so profiles a user adds
+        // to this folder are kept.
+        copyAssetDir("controller_profiles", new File(gameDir, "controller_profiles"), true);
+
         // Shockolate's engine/ is never patched to check this itself (see the
         // class doc above) - it just does plain fopen("res/data/...", ...)
         // and, on a fresh install with no game data copied in yet, that
@@ -213,8 +226,8 @@ public class QuestShockActivity extends SDLActivity {
             .show();
     }
 
-    private void copyAssetFile(String assetPath, File dest) {
-        if (dest.exists()) {
+    private void copyAssetFile(String assetPath, File dest, boolean overwrite) {
+        if (dest.exists() && !overwrite) {
             return;
         }
         File parent = dest.getParentFile();
@@ -234,7 +247,7 @@ public class QuestShockActivity extends SDLActivity {
         }
     }
 
-    private void copyAssetDir(String assetDir, File destDir) {
+    private void copyAssetDir(String assetDir, File destDir, boolean overwrite) {
         AssetManager assets = getAssets();
         String[] entries;
         try {
@@ -248,7 +261,7 @@ public class QuestShockActivity extends SDLActivity {
         }
         destDir.mkdirs();
         for (String entry : entries) {
-            copyAssetFile(assetDir + "/" + entry, new File(destDir, entry));
+            copyAssetFile(assetDir + "/" + entry, new File(destDir, entry), overwrite);
         }
     }
 }

android/app/src/main/java/de/ladkau/questshock/Strings.java

@@ -0,0 +1,217 @@
+package de.ladkau.questshock;
+
+import java.util.HashMap;
+import java.util.Map;
+
+/**
+ * Best-effort (not professionally reviewed) translations for this app's own
+ * UI chrome text - the menu/keyboard panels this project draws itself, not
+ * the game's own resource-string text (which already has its own separate
+ * English/French/German data files). Selected by gShockPrefs.goLanguage (0
+ * English/1 French/2 German, Prefs.h) via MenuOverlay's native language
+ * query (qs_config_current_language()) - see MenuOverlay's periodic header-
+ * refresh timer, which also pushes it to KeyboardOverlay.
+ *
+ * Deliberately excludes the keyboard's own alphanumeric key labels (a-z,
+ * Tab, Space, Esc, ...) - those represent physical key positions/characters
+ * rather than translatable UI copy - and the restart-confirmation dialog's
+ * message text, which is built in native code (qs_config.c's
+ * qs_show_restart_dialog()) with an interpolated option-name list and is
+ * not currently reachable in practice (see CONFIG.md - neither Video
+ * Options option is flagged restart-required today).
+ */
+final class Strings {
+    static final int ENGLISH = 0;
+    static final int FRENCH = 1;
+    static final int GERMAN = 2;
+
+    private static final Map<String, String[]> TABLE = new HashMap<>();
+
+    private static void put(String key, String en, String fr, String de) {
+        TABLE.put(key, new String[]{en, fr, de});
+    }
+
+    static {
+        put("keyboard", "Keyboard", "Clavier", "Tastatur");
+        put("save_configuration", "Save Configuration", "Enregistrer la configuration",
+            "Konfiguration speichern");
+        put("load_configuration", "Load Configuration", "Charger la configuration",
+            "Konfiguration laden");
+        put("reset_position", "Reset Position", "Réinitialiser la position",
+            "Position zurücksetzen");
+        put("main_menu", "Main Menu", "Menu principal", "Hauptmenü");
+        put("video_options", "Video Options", "Options vidéo", "Videooptionen");
+        put("dismiss", "Dismiss", "Fermer", "Schließen");
+        put("restart_now", "Restart Now", "Redémarrer maintenant", "Jetzt neu starten");
+        put("renderer", "Renderer", "Moteur de rendu", "Renderer");
+        put("resolution", "Resolution", "Résolution", "Auflösung");
+        put("software", "Software", "Logiciel", "Software");
+        put("language", "Language", "Langue", "Sprache");
+        put("english", "English", "Anglais", "Englisch");
+        put("french", "French", "Français", "Französisch");
+        put("german", "German", "Allemand", "Deutsch");
+        put("initial_screen", "Initial Screen", "Écran initial", "Startbildschirm");
+        put("game_screen", "Game Screen", "Écran de jeu", "Spielbildschirm");
+        put("width", "Width", "Largeur", "Breite");
+        put("distance", "Distance", "Distance", "Abstand");
+        // "OpenGL" is a proper/brand name - not translated, same in every
+        // language, so it has no entry here; call sites just use it as a
+        // literal.
+        put("keyboard_drag_title", "Keyboard  -  drag here to move",
+            "Clavier  -  faites glisser ici pour déplacer",
+            "Tastatur  -  hier ziehen zum Verschieben");
+        put("close", "Close", "Fermer", "Schließen");
+
+        // Controller Options tab: action row labels, keyed by xr_input.c's
+        // action names (see MenuOverlay.ACTION_KEYS).
+        put("controller_options", "Controller Options", "Options de manette", "Controller-Optionen");
+        put("action_move_forward", "Move Forward", "Avancer", "Vorwärts gehen");
+        put("action_move_back", "Move Back", "Reculer", "Rückwärts gehen");
+        put("action_strafe_left", "Strafe Left", "Pas latéral gauche", "Seitwärts links");
+        put("action_strafe_right", "Strafe Right", "Pas latéral droit", "Seitwärts rechts");
+        put("action_turn_left", "Turn Left", "Tourner à gauche", "Nach links drehen");
+        put("action_turn_right", "Turn Right", "Tourner à droite", "Nach rechts drehen");
+        put("action_jump", "Jump", "Sauter", "Springen");
+        put("action_mouse_click", "Click", "Cliquer", "Klicken");
+        put("action_mouse_double_click", "Double-Click", "Double-clic", "Doppelklick");
+
+        // Hotkey actions (see xr_input.c); all unbound by default.
+        put("action_stand", "Stand", "Debout", "Stehen");
+        put("action_crouch", "Crouch", "Accroupi", "Ducken");
+        put("action_prone", "Prone", "Couché", "Liegen");
+        put("action_pause", "Pause Game", "Mettre en pause", "Spiel pausieren");
+        put("action_full_view", "Fullscreen View", "Vue plein écran", "Vollbildansicht");
+        put("action_normal_view", "Normal View", "Vue normale", "Normale Ansicht");
+        put("action_map_view", "Automap View", "Vue de la carte", "Automap-Ansicht");
+        put("action_save_game", "Save Game", "Sauvegarder", "Spiel speichern");
+        put("action_load_game", "Load Game", "Charger", "Spiel laden");
+        put("action_select_grenade", "Select Grenade", "Sélectionner une grenade",
+            "Granate auswählen");
+        put("action_arm_grenade", "Arm Grenade", "Armer la grenade", "Granate scharfmachen");
+        put("action_select_drug", "Select Drug", "Sélectionner une drogue", "Droge auswählen");
+        put("action_use_drug", "Use Drug", "Utiliser la drogue", "Droge benutzen");
+        put("action_toggle_online_help", "Toggle Online Help", "Basculer l'aide en ligne",
+            "Online-Hilfe umschalten");
+        put("action_show_help", "Show Help", "Afficher l'aide", "Hilfe anzeigen");
+        put("action_toggle_music", "Toggle Music", "Basculer la musique", "Musik umschalten");
+        put("action_quit", "Quit Game", "Quitter le jeu", "Spiel beenden");
+        put("action_cycle_weapon_next", "Next Weapon", "Arme suivante", "Nächste Waffe");
+        put("action_cycle_weapon_prev", "Previous Weapon", "Arme précédente", "Vorherige Waffe");
+        put("action_cycle_detail", "Cycle Detail Level", "Changer le niveau de détail",
+            "Detailgrad wechseln");
+        put("action_reload_weapon_primary", "Reload Weapon (Primary)",
+            "Recharger l'arme (principal)", "Waffe nachladen (primär)");
+        put("action_reload_weapon_secondary", "Reload Weapon (Secondary)",
+            "Recharger l'arme (secondaire)", "Waffe nachladen (sekundär)");
+        put("action_hud_color", "Cycle HUD Color", "Changer la couleur de l'interface",
+            "HUD-Farbe wechseln");
+        put("action_clear_fullscreen", "Clear Fullscreen View", "Quitter la vue plein écran",
+            "Vollbildansicht schließen");
+        put("action_mfd_left_1", "Left MFD: Weapon", "MFD gauche : arme", "Linkes MFD: Waffe");
+        put("action_mfd_left_2", "Left MFD: Item", "MFD gauche : objet", "Linkes MFD: Gegenstand");
+        put("action_mfd_left_3", "Left MFD: Map", "MFD gauche : carte", "Linkes MFD: Karte");
+        put("action_mfd_left_4", "Left MFD: Target", "MFD gauche : cible", "Linkes MFD: Ziel");
+        put("action_mfd_left_5", "Left MFD: Info", "MFD gauche : info", "Linkes MFD: Info");
+        put("action_mfd_right_1", "Right MFD: Weapon", "MFD droit : arme", "Rechtes MFD: Waffe");
+        put("action_mfd_right_2", "Right MFD: Item", "MFD droit : objet",
+            "Rechtes MFD: Gegenstand");
+        put("action_mfd_right_3", "Right MFD: Map", "MFD droit : carte", "Rechtes MFD: Karte");
+        put("action_mfd_right_4", "Right MFD: Target", "MFD droit : cible", "Rechtes MFD: Ziel");
+        put("action_mfd_right_5", "Right MFD: Info", "MFD droit : info", "Rechtes MFD: Info");
+        put("action_fire_weapon", "Fire Weapon", "Tirer", "Waffe abfeuern");
+        // Cheats tab.
+        put("cheats", "Cheats", "Triches", "Cheats");
+        put("cheats_note", "Cheats need a running game.", "Les triches nécessitent une partie en cours.",
+            "Cheats benötigen ein laufendes Spiel.");
+        put("cheat_give_all", "Give All Items & Weapons", "Tout obtenir", "Alles erhalten");
+        put("cheat_physics", "Physics", "Physique", "Physik");
+        put("cheat_level_up", "Next Level", "Niveau suivant", "Nächstes Level");
+        put("cheat_level_down", "Previous Level", "Niveau précédent", "Vorheriges Level");
+        put("cheat_unlimited_health", "Unlimited Health", "Santé illimitée", "Unbegrenzt Leben");
+        put("cheat_unlimited_energy", "Unlimited Energy", "Énergie illimitée", "Unbegrenzt Energie");
+        put("cheat_unlimited_ammo", "Unlimited Ammo", "Munitions illimitées", "Unbegrenzt Munition");
+        put("cheat_unlimited_items", "Unlimited Items", "Objets illimités", "Unbegrenzt Items");
+
+        put("action_free_left_thumbstick_view", "Free View (Left Stick)",
+            "Vue libre (stick gauche)", "Freie Ansicht (linker Stick)");
+        put("action_free_right_thumbstick_view", "Free View (Right Stick)",
+            "Vue libre (stick droit)", "Freie Ansicht (rechter Stick)");
+
+        // Cyberspace actions (active only in cyberspace, see xr_input.c).
+        put("action_cyber_thrust", "Cyberspace: Thrust", "Cyberespace : poussée",
+            "Cyberspace: Schub");
+        put("action_cyber_climb", "Cyberspace: Climb", "Cyberespace : monter",
+            "Cyberspace: Steigen");
+        put("action_cyber_dive", "Cyberspace: Dive", "Cyberespace : plonger",
+            "Cyberspace: Sinken");
+        put("action_cyber_bank_left", "Cyberspace: Bank Left", "Cyberespace : virage à gauche",
+            "Cyberspace: Links kippen");
+        put("action_cyber_bank_right", "Cyberspace: Bank Right", "Cyberespace : virage à droite",
+            "Cyberspace: Rechts kippen");
+        put("action_cyber_roll_left", "Cyberspace: Roll Left", "Cyberespace : roulis gauche",
+            "Cyberspace: Links rollen");
+        put("action_cyber_roll_right", "Cyberspace: Roll Right", "Cyberespace : roulis droit",
+            "Cyberspace: Rechts rollen");
+        put("action_cyber_climb_left", "Cyberspace: Climb Left", "Cyberespace : monter à gauche",
+            "Cyberspace: Links steigen");
+        put("action_cyber_climb_right", "Cyberspace: Climb Right", "Cyberespace : monter à droite",
+            "Cyberspace: Rechts steigen");
+        put("action_cyber_dive_left", "Cyberspace: Dive Left", "Cyberespace : plonger à gauche",
+            "Cyberspace: Links sinken");
+        put("action_cyber_dive_right", "Cyberspace: Dive Right", "Cyberespace : plonger à droite",
+            "Cyberspace: Rechts sinken");
+        put("capture_prompt", "Press a button…", "Appuyez sur un bouton…", "Taste drücken…");
+        put("reset_to_defaults", "Reset to Defaults", "Réinitialiser", "Auf Standard zurücksetzen");
+        put("generic_profile_note",
+            "This controller only exposes a trigger and a menu button - most actions above have "
+                + "nothing to bind to.",
+            "Cette manette n'expose qu'une gâchette et un bouton menu - la plupart des actions "
+                + "ci-dessus n'ont rien à quoi être assignées.",
+            "Dieser Controller bietet nur einen Trigger und eine Menütaste - die meisten "
+                + "Aktionen oben haben nichts, woran sie gebunden werden können.");
+
+        // Raw physical-input display names (xr_input.c's kRawInputNames);
+        // "none" is the unbound sentinel.
+        put("raw_left_trigger", "Left Trigger", "Gâchette gauche", "Linker Trigger");
+        put("raw_right_trigger", "Right Trigger", "Gâchette droite", "Rechter Trigger");
+        put("raw_left_squeeze", "Left Grip", "Préhension gauche", "Linker Griff");
+        put("raw_right_squeeze", "Right Grip", "Préhension droite", "Rechter Griff");
+        put("raw_left_x", "X Button", "Bouton X", "X-Taste");
+        put("raw_left_y", "Y Button", "Bouton Y", "Y-Taste");
+        put("raw_right_a", "A Button", "Bouton A", "A-Taste");
+        put("raw_right_b", "B Button", "Bouton B", "B-Taste");
+        put("raw_left_thumbstick_click", "Left Stick Click", "Clic du stick gauche",
+            "Linker Stick-Klick");
+        put("raw_right_thumbstick_click", "Right Stick Click", "Clic du stick droit",
+            "Rechter Stick-Klick");
+        put("raw_left_thumbstick_up", "Left Stick Up", "Stick gauche haut", "Linker Stick hoch");
+        put("raw_left_thumbstick_down", "Left Stick Down", "Stick gauche bas", "Linker Stick runter");
+        put("raw_left_thumbstick_left", "Left Stick Left", "Stick gauche à gauche",
+            "Linker Stick links");
+        put("raw_left_thumbstick_right", "Left Stick Right", "Stick gauche à droite",
+            "Linker Stick rechts");
+        put("raw_right_thumbstick_up", "Right Stick Up", "Stick droit haut", "Rechter Stick hoch");
+        put("raw_right_thumbstick_down", "Right Stick Down", "Stick droit bas",
+            "Rechter Stick runter");
+        put("raw_right_thumbstick_left", "Right Stick Left", "Stick droit à gauche",
+            "Rechter Stick links");
+        put("raw_right_thumbstick_right", "Right Stick Right", "Stick droit à droite",
+            "Rechter Stick rechts");
+        put("raw_trigger", "Either Trigger", "L'une ou l'autre gâchette", "Beliebiger Trigger");
+        put("raw_squeeze", "Either Grip", "L'une ou l'autre préhension", "Beliebiger Griff");
+        put("raw_none", "(unbound)", "(non assigné)", "(nicht zugewiesen)");
+    }
+
+    private Strings() {}
+
+    static String get(String key, int language) {
+        String[] variants = TABLE.get(key);
+        if (variants == null) {
+            return key;
+        }
+        if (language < 0 || language >= variants.length) {
+            language = ENGLISH;
+        }
+        return variants[language];
+    }
+}

android/build.gradle

@@ -9,7 +9,18 @@ buildscript {
         google()
     }
     dependencies {
-        classpath 'com.android.tools.build:gradle:8.1.1'
+        // 8.5.1+ needed for AGP to automatically 16 KB-align native
+        // libraries' zip entries within the APK - the actual .so's are
+        // already ELF-segment-aligned for this regardless of AGP version
+        // (see build-image/Dockerfile's ANDROID_16KB_LDFLAGS and
+        // app/build.gradle's own CMAKE_SHARED_LINKER_FLAGS), but that alone
+        // doesn't get them 16 KB-aligned *within the APK's zip*, which is
+        // what Android Studio's "not compatible with 16 KB devices"
+        // warning is actually about. Needs Gradle 8.7+ (see
+        // gradle/wrapper/gradle-wrapper.properties) and JDK 17 in whatever
+        // runs gradlew (already the case - see build-image/Dockerfile's
+        // openjdk-17-jdk-headless).
+        classpath 'com.android.tools.build:gradle:8.5.2'
     }
 }
 

android/engine-patches/05-android-audio-driver.patch

@@ -1,6 +1,6 @@
 --- a/src/MacSrc/Shock.c
 +++ b/src/MacSrc/Shock.c
-@@ -162,6 +162,17 @@
+@@ -162,9 +162,26 @@
  void InitSDL() {
      SDL_SetHint(SDL_HINT_NO_SIGNAL_HANDLERS, "1");
      SDL_SetHint(SDL_HINT_RENDER_DRIVER, "opengl");
@@ -12,9 +12,18 @@
 +    // src/audio/aaudio/SDL_aaudio.c). SDLSound.c opens two: one directly via
 +    // SDL_OpenAudioDevice() for cutscene audio, one via Mix_OpenAudio() for
 +    // SFX/MIDI. The older OpenSL ES backend has no such limitation, so force
-+    // it instead of AAudio.
-+    SDL_SetHint(SDL_HINT_AUDIODRIVER, "openslES");
++    // it instead of AAudio. Uses SDL_HINT_OVERRIDE priority so nothing set
++    // earlier (or by SDL/the platform) can take precedence over it.
++    SDL_SetHintWithPriority(SDL_HINT_AUDIODRIVER, "openslES", SDL_HINT_OVERRIDE);
 +#endif
      if (SDL_Init(SDL_INIT_VIDEO | SDL_INIT_TIMER | SDL_INIT_AUDIO) < 0) {
          DEBUG("%s: Init failed", __FUNCTION__);
      }
++#ifdef __ANDROID__
++    // Standing diagnostic: reports which audio driver SDL actually selected,
++    // to confirm the openslES override above took effect on-device.
++    INFO("SDL audio driver: %s", SDL_GetCurrentAudioDriver());
++#endif
+ 
+     // TODO: figure out some universal set of settings that work...
+ #ifdef __ANDROID__

android/engine-patches/09-android-no-window-resize.patch

@@ -1,6 +1,16 @@
 --- a/src/MacSrc/ShockBitmap.c
 +++ b/src/MacSrc/ShockBitmap.c
-@@ -42,11 +42,26 @@
+@@ -27,6 +27,9 @@
+ #include "Shock.h"
+ #include "ShockBitmap.h"
+ #include "2d.h"
++#ifdef __ANDROID__
++#include "OpenGL.h"
++#endif
+ 
+ //--------------------
+ //  Globals
+@@ -42,11 +45,26 @@
  
      SDL_RenderClear(renderer);
  
@@ -27,3 +37,32 @@
  
      SDL_RenderSetLogicalSize(renderer, width, height);
  
+@@ -54,6 +72,28 @@
+ 
+     gScreenWide = width;
+     gScreenHigh = height;
++
++#ifdef __ANDROID__
++    // Skipping SDL_SetWindowSize() above (see the comment for why) also
++    // means no native resize event ever fires on Android when the in-game
++    // resolution changes - opengl_resize() (OpenGL.cc) only ever runs from
++    // that event (see sdl_events.c) or once at OpenGL init, and it's what
++    // (re)creates backupBuffer, the offscreen 3D-view render target, sized
++    // to the logical resolution just changed above. Without this, it stays
++    // stuck at whatever size it was at launch while the rest of the game
++    // (drawSurface/gScreenWide/gScreenHigh, just updated above) moves on to
++    // the new resolution - the actual cause of the display breaking and
++    // becoming unresponsive to further input after changing resolution
++    // in-game. Call it directly instead - after gScreenWide/gScreenHigh
++    // update above, same as the desktop resize event (delivered via
++    // SDL_PollEvent(), so always processed after this function has already
++    // returned) - using the same physical window size init_opengl() itself
++    // used (SDL_GetWindowSize()); that never changes on Android, only the
++    // logical size set above does.
++    int physWidth, physHeight;
++    SDL_GetWindowSize(window, &physWidth, &physHeight);
++    opengl_resize(physWidth, physHeight);
++#endif
+ }
+ 
+ //------------------------------------------------------------------------------------

android/engine-patches/11-android-openxr-present.patch

@@ -199,11 +199,18 @@
  #include "InitMac.h"
  #include "Modding.h"
  #include "OpenGL.h"
-@@ -301,6 +305,21 @@
+@@ -301,6 +305,28 @@
  }
  
  void SDLDraw() {
 +#ifdef __ANDROID__
++    // Diagnostic: logs once per transition (including the very first
++    // frame) between the OpenGL 3D render path and the plain
++    // software-composited 2D path (splash/menus/cutscenes) below - so a
++    // logcat capture immediately shows which one is active without
++    // needing to infer it from screenshots.
++    static int s_last_render_mode = -1; // -1 = not yet logged
++
 +    // The true once-a-frame present hook for the immersive OpenXR path -
 +    // unlike opengl_swap_and_restore() below, this runs every frame
 +    // regardless of should_opengl_swap() (e.g. also during the splash
@@ -221,17 +228,25 @@
      if (should_opengl_swap()) {
          // We want the UI background to be transparent!
          sdlPalette->colors[255].a = 0x00;
-@@ -310,14 +329,27 @@
+@@ -310,14 +336,35 @@
  
          // Set the palette back, and we are done
          sdlPalette->colors[255].a = 0xff;
 +#ifdef __ANDROID__
++        if (s_last_render_mode != 1) {
++            s_last_render_mode = 1;
++            INFO("Game rendering active: OpenGL (3D) mode");
++        }
 +        xr_frame_end();
 +#endif
          return;
      }
  
 +#ifdef __ANDROID__
++    if (s_last_render_mode != 0) {
++        s_last_render_mode = 0;
++        INFO("Game rendering active: software (2D) mode");
++    }
 +    // Same software-rendered frame the desktop path below would present
 +    // via SDL_RenderCopy/SDL_RenderPresent, composited into the XR
 +    // swapchain image xr_frame_begin() bound above instead - SDL's

android/engine-patches/12-android-texture-row-length.patch

@@ -0,0 +1,30 @@
+--- a/src/MacSrc/OpenGL.cc	2026-08-22 09:00:00.000000000 +0200
++++ b/src/MacSrc/OpenGL.cc	2026-08-22 09:05:00.000000000 +0200
+@@ -562,7 +562,14 @@
+ static bool opengl_cache_texture(CachedTexture toCache, grs_bitmap *bm) {
+     SDL_GL_MakeCurrent(window, context);
+
+-    glPixelStorei(GL_UNPACK_ROW_LENGTH, bm->row);
++    // GL_UNPACK_ROW_LENGTH must describe the buffer actually passed to
++    // glTexImage2D() below (toCache.converted->pixels, a separately
++    // allocated SDL_PIXELFORMAT_RGBA32 surface from
++    // SDL_ConvertSurfaceFormat()) - not bm->row, the original 8-bit
++    // source bitmap's own unrelated row stride. Using bm->row here fed
++    // gl4es's GL_UNPACK_ROW_LENGTH emulation the wrong stride whenever
++    // the two differed, corrupting the texture upload.
++    glPixelStorei(GL_UNPACK_ROW_LENGTH, toCache.converted->pitch / 4);
+
+     if (texturesByBitsPtr.size() < MAX_CACHED_TEXTURES) {
+         // We have enough room, generate the new texture
+@@ -696,7 +703,10 @@
+     t->lastDrawTime = *tmd_ticks;
+
+     if (isDirty) {
+-        glPixelStorei(GL_UNPACK_ROW_LENGTH, bm->row);
++        // Same fix as opengl_cache_texture() above - t->converted->pixels
++        // is what's actually uploaded, so its own pitch is what
++        // GL_UNPACK_ROW_LENGTH needs to describe, not bm->row.
++        glPixelStorei(GL_UNPACK_ROW_LENGTH, t->converted->pitch / 4);
+         glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, bm->w, bm->h, 0, GL_RGBA, GL_UNSIGNED_BYTE, t->converted->pixels);
+     }
+ }

android/engine-patches/13-android-swapchain-sync.patch

@@ -0,0 +1,15 @@
+--- a/src/MacSrc/OpenGL.cc
++++ b/src/MacSrc/OpenGL.cc
+@@ -566,7 +566,11 @@
+     glDisableVertexAttribArray(0);
+     glDisableVertexAttribArray(tcAttrib);
+     glDisableVertexAttribArray(lightAttrib);
+-    glFlush();
++    // glFinish(), not glFlush(): xr_swapchain_release() (called by our
++    // caller right after this returns) hands the image to the OpenXR
++    // runtime for cross-process consumption, which requires the GPU write
++    // to have actually landed, not just be queued.
++    glFinish();
+ 
+     SDL_FreeSurface(uiRgba);
+ }

android/engine-patches/14-android-quad-unpack-state.patch

@@ -0,0 +1,16 @@
+--- a/src/MacSrc/OpenGL.cc
++++ b/src/MacSrc/OpenGL.cc
+@@ -525,6 +525,13 @@
+     bind_texture(s_uiTexture);
+     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
++    // uiRgba is tightly packed, but gl4es implements GL_UNPACK_ROW_LENGTH/
++    // GL_UNPACK_ALIGNMENT client-side and persists whatever was last set
++    // across draw calls in the same context. Reset both to the packed
++    // defaults here so this upload doesn't inherit unrelated unpack state
++    // set elsewhere in the frame.
++    glPixelStorei(GL_UNPACK_ROW_LENGTH, 0);
++    glPixelStorei(GL_UNPACK_ALIGNMENT, 1);
+     glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, uiRgba->w, uiRgba->h, 0, GL_RGBA, GL_UNSIGNED_BYTE,
+                  uiRgba->pixels);
+ 

android/engine-patches/15-android-audio-error-detail.patch

@@ -0,0 +1,11 @@
+--- a/src/MacSrc/SDLSound.c
++++ b/src/MacSrc/SDLSound.c
+@@ -42,7 +42,7 @@
+     }
+
+     if (Mix_OpenAudio(48000, AUDIO_S16SYS, 2, 2048) < 0) {
+-        ERROR("%s: Couldn't open audio device", __FUNCTION__);
++        ERROR("%s: Couldn't open audio device: %s", __FUNCTION__, SDL_GetError());
+     }
+
+     Mix_AllocateChannels(SND_MAX_SAMPLES);

android/engine-patches/16-android-audio-single-device.patch

@@ -0,0 +1,181 @@
+--- a/src/MacSrc/SDLSound.c
++++ b/src/MacSrc/SDLSound.c
+@@ -19,24 +19,6 @@
+ 
+     // Startup the sound system
+ 
+-    SDL_AudioSpec spec, obtained;
+-    spec.freq = 48000;
+-    spec.format = AUDIO_S16SYS;
+-    spec.channels = 2;
+-    spec.samples = 2048;
+-    spec.callback = AudioStreamCallback;
+-    spec.userdata = (void *)&cutscene_audiostream;
+-
+-    extern SDL_AudioDeviceID device;
+-    device = SDL_OpenAudioDevice(NULL, 0, &spec, &obtained, 0);
+-
+-    if (device == 0) {
+-        ERROR("Could not open SDL audio: %s", SDL_GetError());
+-    } else {
+-        INFO("Opened Music Stream, deviceID %d, freq %d, size %d, format %d, channels %d, samples %d", device,
+-             obtained.freq, obtained.size, obtained.format, obtained.channels, obtained.samples);
+-    }
+-
+     if (Mix_Init(MIX_INIT_MP3) < 0) {
+         ERROR("%s: Init failed", __FUNCTION__);
+     }
+@@ -50,10 +32,18 @@
+     Mix_HookMusic(MusicCallback, (void *)&MusicDev);
+     Mix_VolumeMusic(MIX_MAX_VOLUME); // use max volume for music stream
+ 
++    // Cutscene/audiolog playback (AudioStreamCallback, see cutsloop.c) used to
++    // run through its own SDL_OpenAudioDevice() device, separate from this
++    // one - SDL only ever allows one open non-capture device on Android's
++    // audio backends, so that second open always failed with "Audio device
++    // already open" and both SFX and MIDI music (both routed through this
++    // Mix_OpenAudio device) silently never played. Mixed into this device's
++    // post-mix stage instead, so there is only ever one device open.
++    Mix_SetPostMix(AudioStreamCallback, (void *)&cutscene_audiostream);
++
+     InitReadXMI();
+ 
+     atexit(Mix_CloseAudio);
+-    atexit(SDL_CloseAudio);
+ 
+     return OK;
+ }
+--- a/src/MacSrc/Shock.c
++++ b/src/MacSrc/Shock.c
+@@ -60,8 +60,6 @@
+ SDL_Palette *sdlPalette;
+ SDL_Renderer *renderer;
+ 
+-SDL_AudioDeviceID device;
+-
+ int num_args;
+ char **arg_values;
+ 
+--- a/src/GameSrc/cutsloop.c
++++ b/src/GameSrc/cutsloop.c
+@@ -83,15 +83,25 @@
+ extern char FrnSubtitle[256];
+ extern char GerSubtitle[256];
+ 
+-extern SDL_AudioDeviceID device;
+-
+-
++// Runs as SDL_mixer's post-mix hook (see snd_start_digital() in
++// SDLSound.c) rather than a dedicated SDL audio device's callback, so
++// SFX/MIDI music sharing the same device are already mixed into `stream`
++// by the time this runs - mix in rather than overwrite, so they aren't
++// silenced whenever a cutscene or audiolog is playing.
+ void AudioStreamCallback(void *userdata, unsigned char *stream, int len)
+ {
++  static Uint8 mixbuf[MOVIE_DEFAULT_BLOCKLEN * 4];
+   SDL_AudioStream *as = *(SDL_AudioStream **)userdata;
+ 
+-  if (as != NULL && SDL_AudioStreamAvailable(as) > 0)
+-    SDL_AudioStreamGet(as, stream, len);
++  if (as == NULL || SDL_AudioStreamAvailable(as) <= 0)
++    return;
++
++  if (len > (int)sizeof(mixbuf))
++    len = (int)sizeof(mixbuf);
++
++  int got = SDL_AudioStreamGet(as, mixbuf, len);
++  if (got > 0)
++    SDL_MixAudioFormat(stream, mixbuf, AUDIO_S16SYS, got, SDL_MIX_MAXVOLUME);
+ }
+ 
+ 
+@@ -153,11 +163,13 @@
+ 
+   if (cutscene_audiostream != NULL)
+   {
+-    SDL_PauseAudioDevice(device, 1);
+-    SDL_Delay(1);
+-
++    // AudioStreamCallback (SDL_mixer's post-mix hook) runs continuously on
++    // SDL_mixer's own audio thread and reads this pointer - lock around
++    // freeing it so that thread can't be mid-read when it's freed.
++    SDL_LockAudio();
+     SDL_FreeAudioStream(cutscene_audiostream);
+     cutscene_audiostream = NULL;
++    SDL_UnlockAudio();
+ 
+     if (cutscene_audiobuffer)
+     {
+@@ -184,8 +196,6 @@
+ 
+   if (cutscene_audiostream)
+   {
+-    SDL_PauseAudioDevice(device, 0);
+-  
+     if (cutscene_audiobuffer_size > 0)
+     {
+       // === adjust volume in buffer here ===
+@@ -325,10 +335,9 @@
+ 
+   if (sfx_on)
+   {
+-    SDL_PauseAudioDevice(device, 1);
+-    SDL_Delay(1);
+-
++    SDL_LockAudio();
+     cutscene_audiostream = SDL_NewAudioStream(AUDIO_U8, 1, fix_int(amovie->a.sampleRate), AUDIO_S16SYS, 2, 48000);
++    SDL_UnlockAudio();
+ 
+     cutscene_audiobuffer_pos = cutscene_audiobuffer;
+   }
+--- a/src/GameSrc/audiolog.c
++++ b/src/GameSrc/audiolog.c
+@@ -61,8 +61,6 @@
+ extern uchar curr_alog_vol;
+ extern char which_lang;
+ 
+-extern SDL_AudioDeviceID device;
+-
+ errtype audiolog_init(void) { return OK; }
+ 
+ errtype audiolog_play(int email_id) {
+@@ -114,10 +112,9 @@
+ 
+     DEBUG("%s: Playing email", __FUNCTION__);
+ 
+-    SDL_PauseAudioDevice(device, 1);
+-    SDL_Delay(1);
+-
++    SDL_LockAudio();
+     cutscene_audiostream = SDL_NewAudioStream(AUDIO_U8, 1, fix_int(palog->a.sampleRate), AUDIO_S16SYS, 2, 48000);
++    SDL_UnlockAudio();
+ 
+     audiolog_audiobuffer_pos = audiolog_audiobuffer;
+ 
+@@ -150,11 +147,14 @@
+     }
+ 
+     if (cutscene_audiostream != NULL) {
+-        SDL_PauseAudioDevice(device, 1);
+-        SDL_Delay(1);
+-
++        // AudioStreamCallback (SDL_mixer's post-mix hook, see cutsloop.c)
++        // runs continuously on SDL_mixer's own audio thread and reads this
++        // pointer - lock around freeing it so that thread can't be
++        // mid-read when it's freed.
++        SDL_LockAudio();
+         SDL_FreeAudioStream(cutscene_audiostream);
+         cutscene_audiostream = NULL;
++        SDL_UnlockAudio();
+ 
+         if (audiolog_audiobuffer) {
+             free(audiolog_audiobuffer);
+@@ -177,8 +177,6 @@
+ 
+ errtype audiolog_loop_callback(void) {
+     if (cutscene_audiostream) {
+-        SDL_PauseAudioDevice(device, 0);
+-
+         if (audiolog_audiobuffer_size > 0) {
+             int i, vol = curr_alog_vol * 127 / 100; // convert from 0-100 to 0-127
+ 

android/engine-patches/17-android-native-midi-unsupported.patch

@@ -0,0 +1,17 @@
+--- a/src/MusicSrc/MusicDevice.c
++++ b/src/MusicSrc/MusicDevice.c
+@@ -569,6 +569,14 @@
+     // connected
+     ndev->dev.isOpen = 1;
+     ndev->dev.outputIndex = outputIndex;
++#else
++    // No native MIDI backend implemented for this platform (e.g. Android) -
++    // report failure so InitDecXMI()'s caller falls back to another device
++    // instead of treating an unopened device as successfully initialized.
++    (void)outputIndex;
++    (void)samplerate;
++    WARN("NativeMidiInit(): native MIDI is not implemented on this platform");
++    return -1;
+ #endif
+     // suppress compiler warnings
+     (void)outputIndex;

android/engine-patches/18-android-opengl-immediate-mode-attribs.patch

@@ -0,0 +1,455 @@
+--- a/src/MacSrc/OpenGL.cc
++++ b/src/MacSrc/OpenGL.cc
+@@ -391,7 +391,16 @@
+ }
+ 
+ void opengl_resize(int width, int height) {
++#ifndef __ANDROID__
++    // Skipped on Android - see opengl_swap_and_restore()'s comment below for
++    // why re-asserting an already-current context/surface every call breaks
++    // gl4es's own "current framebuffer" bookkeeping, even though the real
++    // driver binding never actually changes. This turned out to be the
++    // actual source of the persistent per-frame GL_INVALID_OPERATION (1282)
++    // that plagued 3D rendering: this same unconditional call was present at
++    // the top of nearly every function in this file, not just here.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     int logical_width, logical_height;
+     SDL_RenderGetLogicalSize(renderer, &logical_width, &logical_height);
+@@ -443,7 +452,10 @@
+ }
+ 
+ void opengl_end_frame() {
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     // Done rendering to the frame buffer, reset back to normal
+     BindFrameBuffer(nullptr);
+@@ -470,7 +482,10 @@
+ static bool nightsight_active() { return WareActive(player_struct.hardwarez_status[HARDWARE_GOGGLE_INFRARED]); }
+ 
+ void opengl_start_frame() {
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     // Start rendering to our frame buffer canvas
+     BindFrameBuffer(&backupBuffer);
+@@ -500,6 +515,130 @@
+ }
+ 
+ #ifdef __ANDROID__
++// Real per-vertex arrays, not glBegin/glVertexAttrib/glVertex3f immediate
++// mode: glVertexAttrib*() is GLES2's *constant*-attribute API - without an
++// enabled vertex array it sets one value for the whole draw call, not a
++// fresh value per vertex. gl4es's immediate-mode emulation only reproduces
++// desktop GL's per-vertex-capture behavior for attribute 0 (position,
++// driven directly by glVertex3f), not for custom attributes like this
++// shader's texcoords/light. That means every one of this file's
++// glBegin(GL_TRIANGLE_STRIP)-based draws - not just the UI-overlay quad
++// this was first found on, but also opengl_light_tmap() (every textured
++// wall/floor polygon), opengl_bitmap() (sprites) and opengl_draw_poly()
++// (flat/gouraud polygons) via draw_vertex() - draws every vertex with
++// whatever texcoord/light was set for the *last* vertex instead of its
++// own, which is what actually produced flat-colored/untextured world
++// geometry after this patch's first revision only fixed the final
++// screen-composite quad (the one bug this was originally found on).
++//
++// android_imm_begin()/android_imm_vertex()/android_imm_end() below emulate
++// just enough of glBegin(GL_TRIANGLE_STRIP)/glVertexAttrib*()/glVertex3f()
++// immediate mode to replace every such call site on Android, by buffering
++// vertices and flushing them as one real glDrawArrays() call - the engine's
++// other rendering still uses real immediate mode for attribute 0 elsewhere
++// on desktop builds, which depends on it not having an enabled array bound,
++// so android_imm_end() always disables the arrays it enables before
++// returning.
++struct AndroidImmVertex {
++    float x, y, z;
++    float u, v;
++    float light;
++};
++
++// Arbitrarily-sized, but generous: the engine's polygons (room walls/
++// floors, sprites, screen-filling quads) are all small, hand-authored
++// shapes, never anywhere near this many vertices.
++static AndroidImmVertex s_immVerts[64];
++static int s_immVertCount;
++static GLint s_immTcAttrib;
++static GLint s_immLightAttrib;
++
++// tcAttrib < 0 means this draw has no texcoord attribute (flat/gouraud
++// polygons via opengl_draw_poly()) - matches draw_vertex()'s own
++// `tcAttrib >= 0` check below.
++static void android_imm_begin(GLint tcAttrib, GLint lightAttrib) {
++    s_immVertCount = 0;
++    s_immTcAttrib = tcAttrib;
++    s_immLightAttrib = lightAttrib;
++}
++
++static void android_imm_vertex(float x, float y, float z, float u, float v, float light) {
++    if (s_immVertCount >= (int)(sizeof(s_immVerts) / sizeof(s_immVerts[0]))) {
++        WARN("android_imm_vertex: dropping vertex past the %d-vertex limit", s_immVertCount);
++        return;
++    }
++    AndroidImmVertex &vert = s_immVerts[s_immVertCount++];
++    vert.x = x;
++    vert.y = y;
++    vert.z = z;
++    vert.u = u;
++    vert.v = v;
++    vert.light = light;
++}
++
++static void android_imm_end() {
++    if (s_immVertCount < 3)
++        return;
++    glEnableVertexAttribArray(0);
++    if (s_immTcAttrib >= 0)
++        glEnableVertexAttribArray(s_immTcAttrib);
++    glEnableVertexAttribArray(s_immLightAttrib);
++    glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, sizeof(AndroidImmVertex), &s_immVerts[0].x);
++    if (s_immTcAttrib >= 0)
++        glVertexAttribPointer(s_immTcAttrib, 2, GL_FLOAT, GL_FALSE, sizeof(AndroidImmVertex),
++                               &s_immVerts[0].u);
++    glVertexAttribPointer(s_immLightAttrib, 1, GL_FLOAT, GL_FALSE, sizeof(AndroidImmVertex),
++                           &s_immVerts[0].light);
++    glDrawArrays(GL_TRIANGLE_STRIP, 0, s_immVertCount);
++    glDisableVertexAttribArray(0);
++    if (s_immTcAttrib >= 0)
++        glDisableVertexAttribArray(s_immTcAttrib);
++    glDisableVertexAttribArray(s_immLightAttrib);
++}
++
++// Same underlying bug as android_imm_*() above, for opengl_draw_star():
++// opengl_begin_stars()/opengl_draw_star()/opengl_end_stars() draw up to
++// NUM_STARS (rendtool.c) individual GL_POINTS between one begin/end pair,
++// each with its own per-star brightness via glVertexAttrib1f(lightAttrib,
++// ...)/glVertex3f() immediate mode - under gl4es that made every star on
++// screen render at whatever brightness was set for the *last* one. Shaped
++// differently enough from android_imm_*() above (GL_POINTS instead of
++// GL_TRIANGLE_STRIP, far more vertices, no texcoord) to warrant its own
++// small buffer rather than overloading that one.
++static AndroidImmVertex s_starVerts[1000]; // NUM_STARS, GameSrc/rendtool.c
++static int s_starVertCount;
++static GLint s_starLightAttrib;
++
++static void android_stars_begin(GLint lightAttrib) {
++    s_starVertCount = 0;
++    s_starLightAttrib = lightAttrib;
++}
++
++static void android_stars_vertex(float x, float y, float z, float light) {
++    if (s_starVertCount >= (int)(sizeof(s_starVerts) / sizeof(s_starVerts[0]))) {
++        WARN("android_stars_vertex: dropping star past the %d-star limit", s_starVertCount);
++        return;
++    }
++    AndroidImmVertex &vert = s_starVerts[s_starVertCount++];
++    vert.x = x;
++    vert.y = y;
++    vert.z = z;
++    vert.light = light;
++}
++
++static void android_stars_end() {
++    if (s_starVertCount == 0)
++        return;
++    glEnableVertexAttribArray(0);
++    glEnableVertexAttribArray(s_starLightAttrib);
++    glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, sizeof(AndroidImmVertex), &s_starVerts[0].x);
++    glVertexAttribPointer(s_starLightAttrib, 1, GL_FLOAT, GL_FALSE, sizeof(AndroidImmVertex),
++                           &s_starVerts[0].light);
++    glDrawArrays(GL_POINTS, 0, s_starVertCount);
++    glDisableVertexAttribArray(0);
++    glDisableVertexAttribArray(s_starLightAttrib);
++}
++
+ // Shared by opengl_swap_and_restore()'s UI-overlay blit and
+ // android_composite_software_frame() below - draws an SDL_Surface as a
+ // fullscreen textured quad via gl4es. SDL's own renderer can't be used
+@@ -537,42 +676,15 @@
+ 
+     set_blend_mode(blend);
+ 
+-    // Real per-vertex arrays, not glBegin/glVertexAttrib/glVertex3f
+-    // immediate mode: glVertexAttrib*() is GLES2's *constant*-attribute
+-    // API - without an enabled vertex array it sets one value for the
+-    // whole draw call, not a fresh value per vertex. gl4es's immediate-mode
+-    // emulation only reproduces desktop GL's per-vertex-capture behavior
+-    // for attribute 0 (position, driven directly by glVertex3f), not for
+-    // custom attributes like this shader's texcoords/light.
+-    //
+     // V is flipped (1 at the bottom, 0 at the top): GL texture v=0
+     // addresses the first row of data passed to glTexImage2D, but uiRgba
+     // (an SDL surface) stores its rows top-down.
+-    struct QuadVertex {
+-        float x, y, z;
+-        float u, v;
+-        float light;
+-    };
+-    static const QuadVertex quadVerts[4] = {
+-        {1.0f, -1.0f, 0.0f, 1.0f, 1.0f, 1.0f},
+-        {1.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f},
+-        {-1.0f, -1.0f, 0.0f, 0.0f, 1.0f, 1.0f},
+-        {-1.0f, 1.0f, 0.0f, 0.0f, 0.0f, 1.0f},
+-    };
+-    glEnableVertexAttribArray(0);
+-    glEnableVertexAttribArray(tcAttrib);
+-    glEnableVertexAttribArray(lightAttrib);
+-    glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, sizeof(QuadVertex), &quadVerts[0].x);
+-    glVertexAttribPointer(tcAttrib, 2, GL_FLOAT, GL_FALSE, sizeof(QuadVertex), &quadVerts[0].u);
+-    glVertexAttribPointer(lightAttrib, 1, GL_FLOAT, GL_FALSE, sizeof(QuadVertex),
+-                           &quadVerts[0].light);
+-    glDrawArrays(GL_TRIANGLE_STRIP, 0, 4);
+-    // The engine's other rendering uses glBegin/glVertexAttrib/glVertex3f
+-    // immediate mode for attribute 0, which depends on it not having an
+-    // enabled array bound.
+-    glDisableVertexAttribArray(0);
+-    glDisableVertexAttribArray(tcAttrib);
+-    glDisableVertexAttribArray(lightAttrib);
++    android_imm_begin(tcAttrib, lightAttrib);
++    android_imm_vertex(1.0f, -1.0f, 0.0f, 1.0f, 1.0f, 1.0f);
++    android_imm_vertex(1.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f);
++    android_imm_vertex(-1.0f, -1.0f, 0.0f, 0.0f, 1.0f, 1.0f);
++    android_imm_vertex(-1.0f, 1.0f, 0.0f, 0.0f, 0.0f, 1.0f);
++    android_imm_end();
+     // glFinish(), not glFlush(): xr_swapchain_release() (called by our
+     // caller right after this returns) hands the image to the OpenXR
+     // runtime for cross-process consumption, which requires the GPU write
+@@ -642,6 +754,16 @@
+     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
+     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
+ 
++#ifdef __ANDROID__
++    // Real per-vertex arrays, not glBegin/glVertexAttrib/glVertex3f
++    // immediate mode - see android_imm_begin()'s comment above for why.
++    android_imm_begin(tcAttrib, lightAttrib);
++    android_imm_vertex(1.0f, -1.0f, 0.0f, 1.0f, 0.0f, 1.0f);
++    android_imm_vertex(1.0f, 1.0f, 0.0f, 1.0f, 1.0f, 1.0f);
++    android_imm_vertex(-1.0f, -1.0f, 0.0f, 0.0f, 0.0f, 1.0f);
++    android_imm_vertex(-1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f);
++    android_imm_end();
++#else
+     glBegin(GL_TRIANGLE_STRIP);
+     glVertexAttrib2f(tcAttrib, 1.0f, 0.0f);
+     glVertexAttrib1f(lightAttrib, 1.0f);
+@@ -656,6 +778,7 @@
+     glVertexAttrib1f(lightAttrib, 1.0f);
+     glVertex3f(-1.0f, 1.0f, 0.0f);
+     glEnd();
++#endif
+ 
+     // Finish drawing the 3d view
+     glFlush();
+@@ -709,7 +832,10 @@
+     render_width = width;
+     render_height = height;
+ 
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     int lw, lh;
+     SDL_RenderGetLogicalSize(renderer, &lw, &lh);
+@@ -729,7 +855,10 @@
+ }
+ 
+ static bool opengl_cache_texture(CachedTexture toCache, grs_bitmap *bm) {
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     // GL_UNPACK_ROW_LENGTH must describe the buffer actually passed to
+     // glTexImage2D() below (toCache.converted->pixels, a separately
+@@ -771,7 +900,10 @@
+ 
+     DEBUG("Clearing OpenGL texture cache.");
+ 
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     for (auto iter = texturesByBitsPtr.begin(); iter != texturesByBitsPtr.end();) {
+         // don't free locked surfaces
+@@ -896,10 +1028,16 @@
+         light = 1.0f - (clut - grd_screen->ltab) / 4096.0f;
+     }
+ 
++#ifdef __ANDROID__
++    (void)tcAttrib; // captured by android_imm_begin() instead - see its comment above
++    android_imm_vertex(vertex.x / 65536.0f, vertex.y / 65536.0f, -vertex.z / 65536.0f,
++                        vertex.uv.u / 256.0f, vertex.uv.v / 256.0f, light);
++#else
+     if (tcAttrib >= 0)
+         glVertexAttrib2f(tcAttrib, vertex.uv.u / 256.0, vertex.uv.v / 256.0);
+     glVertexAttrib1f(lightAttrib, light);
+     glVertex3f(vertex.x / 65536.0f, vertex.y / 65536.0f, -vertex.z / 65536.0f);
++#endif
+ }
+ 
+ int opengl_draw_tmap(int n, g3s_phandle *vp, grs_bitmap *bm) { return opengl_light_tmap(n, vp, bm); }
+@@ -910,7 +1048,10 @@
+         return CLIP_ALL;
+     }
+ 
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+     set_blend_mode(bm->flags & BMF_TRANS);
+ 
+     glUseProgram(textureShaderProgram.shaderProgram);
+@@ -928,13 +1069,21 @@
+     glUniformMatrix4fv(textureShaderProgram.uniView, 1, false, ViewMatrix);
+     glUniformMatrix4fv(textureShaderProgram.uniProj, 1, false, ProjectionMatrix);
+ 
++#ifdef __ANDROID__
++    android_imm_begin(tcAttrib, lightAttrib);
++#else
+     glBegin(GL_TRIANGLE_STRIP);
++#endif
+     draw_vertex(*(vp[1]), tcAttrib, lightAttrib);
+     draw_vertex(*(vp[0]), tcAttrib, lightAttrib);
+     draw_vertex(*(vp[2]), tcAttrib, lightAttrib);
+     if (n > 3)
+         draw_vertex(*(vp[3]), tcAttrib, lightAttrib);
++#ifdef __ANDROID__
++    android_imm_end();
++#else
+     glEnd();
++#endif
+ 
+     return CLIP_NONE;
+ }
+@@ -949,7 +1098,10 @@
+         return CLIP_ALL;
+     }
+ 
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+     set_blend_mode(bm->flags & BMF_TRANS);
+ 
+     glUseProgram(textureShaderProgram.shaderProgram);
+@@ -976,6 +1128,14 @@
+ 
+     glUniform1i(textureShaderProgram.uniMutant, (bm->type == BMT_TLUC8) || (bm->flags == BMF_TLUC8));
+ 
++#ifdef __ANDROID__
++    android_imm_begin(tcAttrib, lightAttrib);
++    android_imm_vertex(convx(vpl[1]->x), convy(vpl[1]->y), 0.0f, 1.0f, 0.0f, light);
++    android_imm_vertex(convx(vpl[0]->x), convy(vpl[0]->y), 0.0f, 0.0f, 0.0f, light);
++    android_imm_vertex(convx(vpl[2]->x), convy(vpl[2]->y), 0.0f, 1.0f, 1.0f, light);
++    android_imm_vertex(convx(vpl[3]->x), convy(vpl[3]->y), 0.0f, 0.0f, 1.0f, light);
++    android_imm_end();
++#else
+     glBegin(GL_TRIANGLE_STRIP);
+     glVertexAttrib2f(tcAttrib, 1.0f, 0.0f);
+     glVertexAttrib1f(lightAttrib, light);
+@@ -990,6 +1150,7 @@
+     glVertexAttrib1f(lightAttrib, light);
+     glVertex3f(convx(vpl[3]->x), convy(vpl[3]->y), 0.0f);
+     glEnd();
++#endif
+ 
+     glUniform1i(textureShaderProgram.uniMutant, false);
+ 
+@@ -1007,7 +1168,10 @@
+         return CLIP_ALL;
+     }
+ 
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     glUseProgram(colorShaderProgram.shaderProgram);
+     glUniformMatrix4fv(colorShaderProgram.uniView, 1, false, ViewMatrix);
+@@ -1064,7 +1228,11 @@
+     GLint lightAttrib = colorShaderProgram.lightAttrib;
+ 
+     long a = 0, b = n_verts - 1;
++#ifdef __ANDROID__
++    android_imm_begin(-1, lightAttrib);
++#else
+     glBegin(GL_TRIANGLE_STRIP);
++#endif
+     while (true) {
+         draw_vertex(*(p[a]), -1, lightAttrib);
+         if (a++ == b)
+@@ -1073,7 +1241,11 @@
+         if (b-- == a)
+             break;
+     }
++#ifdef __ANDROID__
++    android_imm_end();
++#else
+     glEnd();
++#endif
+ 
+     return CLIP_NONE;
+ }
+@@ -1085,7 +1257,10 @@
+ }
+ 
+ void opengl_begin_stars() {
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
++#endif
+ 
+     // Bind the star shader before setting the point size: on Android,
+     // questshock_glPointSize() (see the __ANDROID__ block above) needs
+@@ -1108,11 +1283,19 @@
+     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
+     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
+ 
++#ifdef __ANDROID__
++    android_stars_begin(starShaderProgram.lightAttrib);
++#else
+     glBegin(GL_POINTS);
++#endif
+ }
+ 
+ void opengl_end_stars() {
++#ifdef __ANDROID__
++    android_stars_end();
++#else
+     glEnd();
++#endif
+ 
+     // Turn off the stencil test and blending
+     opengl_set_stencil(0x00);
+@@ -1120,9 +1303,11 @@
+ }
+ 
+ int opengl_draw_star(fix star_x, fix star_y, int c, bool anti_alias) {
++#ifndef __ANDROID__
++    // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
+-
+     GLint lightAttrib = starShaderProgram.lightAttrib;
++#endif
+ 
+     float x = fix_float(star_x);
+     float y = fix_float(star_y);
+@@ -1142,8 +1327,12 @@
+     int color = (std_color_base + std_color_range - 1 - c);
+     color = (255 * color) / (std_color_range + 1);
+ 
++#ifdef __ANDROID__
++    android_stars_vertex(x, y, -0.25f, color / 255.0f);
++#else
+     glVertexAttrib1f(lightAttrib, color / 255.0f);
+     glVertex3f(x, y, -0.25f);
++#endif
+ 
+     return CLIP_NONE;
+ }

android/engine-patches/19-android-fix-hackcam-opengl-frame.patch

@@ -0,0 +1,45 @@
+--- a/src/GameSrc/frsetup.c
++++ b/src/GameSrc/frsetup.c
+@@ -635,7 +635,27 @@
+     uchar old_cam_type;
+     int detail;
+ 
++#ifdef __ANDROID__
++    // should_opengl_swap() (unlike use_opengl(), see its own
++    // FR_PICKUPM_MASK|FR_HACKCAM_MASK exclusion just below and the
++    // matching one used for the STEREO_SUPPORT path in fr_send_view()
++    // below) doesn't know which _fr context is currently being prepared -
++    // it's a frame-level check, also used by Shock.c's SDLDraw() to pick
++    // the frame's overall compositing path. render_hack_cameras() (see
++    // render.c) calls fr_rend() - and so this function - a second time per
++    // real frame for each active hack-camera monitor, rendering into a
++    // private software (FR_DOUBLEB_MASK) canvas rather than the actual
++    // GL-backed screen. Without this exclusion, opengl_start_frame() runs
++    // again mid-frame for that render even though its own polygon draw
++    // calls correctly stay on the software path (use_opengl() already
++    // excludes them) - re-entering the OpenXR swapchain/framebuffer setup
++    // a second time before the first call's frame has ended. Not known to
++    // be exercised on desktop (no OpenXR swapchain there), so this fix is
++    // kept Android-only rather than changing should_opengl_swap() itself.
++    if (should_opengl_swap() && !(_fr_curflags & (FR_PICKUPM_MASK | FR_HACKCAM_MASK))) {
++#else
+     if(should_opengl_swap()) {
++#endif
+         opengl_start_frame();
+     }
+ 
+@@ -823,7 +843,14 @@
+ 
+     g3_end_frame();
+ 
++#ifdef __ANDROID__
++    // Mirrors the same fix in fr_start_view() above - see its comment.
++    // opengl_start_frame()/opengl_end_frame() must stay paired per real
++    // GL frame, so this exclusion has to match that one exactly.
++    if (should_opengl_swap() && !(_fr_curflags & (FR_PICKUPM_MASK | FR_HACKCAM_MASK))) {
++#else
+     if(should_opengl_swap()) {
++#endif
+         opengl_end_frame();
+     }
+ 

android/engine-patches/20-android-no-default-framebuffer.patch

@@ -0,0 +1,34 @@
+--- a/src/MacSrc/OpenGL.cc
++++ b/src/MacSrc/OpenGL.cc
+@@ -455,10 +455,30 @@
+ #ifndef __ANDROID__
+     // See opengl_resize()'s comment above.
+     SDL_GL_MakeCurrent(window, context);
+-#endif
+ 
+     // Done rendering to the frame buffer, reset back to normal
+     BindFrameBuffer(nullptr);
++#else
++    // BindFrameBuffer(nullptr) (glBindFramebuffer/glBindRenderbuffer to id
++    // 0) means "the real window surface" - on desktop that's SDL's actual
++    // GL window, but this app's real presentation target is never that
++    // SDLSurface's own EGL surface at all - it's the OpenXR swapchain's
++    // per-image FBOs, set up separately in xr_swapchain.c. Whatever
++    // framebuffer/renderbuffer 0 actually resolves to for gl4es in this
++    // configuration, binding it here reliably left gl4es reporting a
++    // persistent GL_INVALID_OPERATION (1282) - confirmed by bisecting
++    // through this whole render path with per-call checkpoints, all clean
++    // right up until "after opengl_end_frame", the one immediately after
++    // this exact call.
++    //
++    // The bind is also functionally dead on Android regardless of that:
++    // by the time anything next draws, Shock.c's SDLDraw() has already
++    // run xr_frame_begin() -> xr_swapchain_acquire(), which rebinds to
++    // that frame's real swapchain FBO before opengl_swap_and_restore()
++    // (the only thing that draws before the next opengl_start_frame()'s
++    // own BindFrameBuffer(&backupBuffer)) runs - so skipping it changes
++    // nothing about what actually gets rendered where.
++#endif
+     palette_dirty = false;
+ }
+ 

android/engine-patches/21-android-config.patch

@@ -0,0 +1,54 @@
+--- a/src/MacSrc/Shock.c
++++ b/src/MacSrc/Shock.c
+@@ -31,6 +31,7 @@
+ #include <SDL.h>
+ 
+ #ifdef __ANDROID__
++#include "qs_config.h"
+ #include "xr_session.h"
+ #endif
+ 
+@@ -109,6 +110,15 @@
+     LoadHotkeyKeybinds();
+     LoadMoveKeybinds();
+ 
++#ifdef __ANDROID__
++    // Persistent, human-editable JSON config (questshock.config.json) - see
++    // qs_config.h/CONFIG.md. After prefs.txt is loaded (above) so this file
++    // can override it, before init_all() below so there's no live-vs-
++    // restart distinction to worry about yet - every field just takes full
++    // effect as part of this same startup.
++    qs_config_load_startup();
++#endif
++
+     // Process some startup arguments
+ 
+     bool show_splash = !CheckArgument("-nosplash");
+--- a/src/Libraries/INPUT/Source/sdl_events.c
++++ b/src/Libraries/INPUT/Source/sdl_events.c
+@@ -29,6 +29,10 @@
+ #include <SDL.h>
+ #include <OpenGL.h>
+ 
++#ifdef __ANDROID__
++#include "qs_config.h"
++#endif
++
+ extern SDL_Window *window;
+ extern SDL_Renderer *renderer;
+ 
+@@ -481,6 +485,14 @@
+     SDL_Event ev;
+ 
+     while (SDL_PollEvent(&ev)) {
++#ifdef __ANDROID__
++        // Custom event types qs_config_request_save()/_load() enqueue from
++        // the "Save Configuration"/"Load Configuration" menu buttons (see
++        // qs_config.h) - handled here, on this thread, rather than directly
++        // from those JNI calls (which run on Android's UI thread).
++        if (qs_config_handle_event(&ev))
++            continue;
++#endif
+         switch (ev.type) {
+         case SDL_QUIT:
+             // a bit hacky at this place, but this would allow exiting the game via the window's [x] button

android/engine-patches/22-android-screen-profile.patch

@@ -0,0 +1,30 @@
+--- a/src/GameSrc/mainloop.c
++++ b/src/GameSrc/mainloop.c
+@@ -57,6 +57,10 @@
+ #include "tools.h"
+ #include "wrapper.h"
+
++#ifdef __ANDROID__
++#include "qs_config.h"
++#endif
++
+ // how is the game doing, anyway, set to true at end of time
+ uchar cit_success = FALSE;
+
+@@ -103,6 +107,16 @@
+     _last_mode = *cmode;
+     (*exit_modes[_last_mode])();
+     *cmode = _new_mode;
++#ifdef __ANDROID__
++    // Notifies qs_config.c of every loop-mode transition so it can pick
++    // between the "Initial Screen" and "Game Screen" virtual-screen
++    // presets - see qs_config.h/CONFIG.md. Called synchronously, directly,
++    // on this thread (mainloop()'s own) - unlike the UI-thread-triggered
++    // config actions elsewhere in qs_config.c, this doesn't need the
++    // cross-thread SDL-event dance since it already originates on the
++    // right thread.
++    qs_screen_profile_notify_loop_mode(*cmode);
++#endif
+     _static_change = 0;
+     if (*cmode >= 0)
+         (*enter_modes[*cmode])();

android/engine-patches/23-android-intro-language.patch

@@ -0,0 +1,42 @@
+--- a/src/GameSrc/cutsloop.c
++++ b/src/GameSrc/cutsloop.c
+@@ -292,11 +292,38 @@
+ 
+ 
+ 
++#ifdef __ANDROID__
++// The intro (cutscene 0) ships in one file per language - localized
++// voice-over - each holding the same resource id (cutscene_anims[0]), so
++// opening the current language's file instead is all it takes. The death
++// and ending cutscenes only have one version.
++static char *intro_files_by_language[3] =
++{
++  "res/data/svgaintr.res", // English
++  "res/data/svfrintr.res", // French
++  "res/data/svgeintr.res"  // German
++};
++
++static int open_cutscene_file(int id)
++{
++  if (id == 0 && which_lang > 0 && which_lang < 3)
++  {
++    int handle = ResOpenFile(intro_files_by_language[(int)which_lang]);
++    if (handle > 0)
++      return handle;
++    // Not installed for this language - fall back to English below.
++  }
++  return ResOpenFile(cutscene_files[id]);
++}
++#else
++#define open_cutscene_file(id) ResOpenFile(cutscene_files[id])
++#endif
++
+ short play_cutscene(int id, bool show_credits)
+ {
+   MacTuneKillCurrentTheme();
+ 
+-  cutscene_filehandle = ResOpenFile(cutscene_files[id]);
++  cutscene_filehandle = open_cutscene_file(id);
+   if (cutscene_filehandle <= 0) {
+       // If we failed to play the cutscene, go to setup / credits.
+       _new_mode = SETUP_LOOP;

android/engine-patches/24-android-cyberspace-query.patch

@@ -0,0 +1,13 @@
+--- a/src/GameSrc/mouselook.c
++++ b/src/GameSrc/mouselook.c
+@@ -121,3 +121,10 @@
+         get_mouselook_vel(&mvelx, &mvely);
+     }
+ }
++
++#ifdef __ANDROID__
++// Whether the player is currently in cyberspace; read by the Android
++// controller input code (android/app/src/main/cpp/xr_input.c) to switch
++// between the normal and cyberspace action sets.
++int qs_in_cyberspace(void) { return global_fullmap != NULL && global_fullmap->cyber; }
++#endif

android/engine-patches/25-android-cyberspace-analog-scale.patch

@@ -0,0 +1,110 @@
+--- a/src/GameSrc/movekeys.c
++++ b/src/GameSrc/movekeys.c
+@@ -44,6 +44,12 @@
+ extern bool gKeypadOverride;
+ 
+ uchar parse_motion_key(ushort code, short *cnum, short *cval);
++#ifdef __ANDROID__
++// Set every frame by android/app/src/main/cpp/xr_input.c.
++float qs_cyber_pitch_scale = 1.0f;
++float qs_cyber_bank_scale = 1.0f;
++#endif
++
+ uchar parse_motion_key_cyber(ushort code, short *cnum, short *cval);
+ void init_motion_polling(void);
+ 
+@@ -173,6 +179,20 @@
+     *cnum = -1;
+     *cval = 0;
+ 
++#ifdef __ANDROID__
++    // Pitch and bank strength, scaled by the controller thumbstick's
++    // deflection (see android/app/src/main/cpp/xr_input.c); 1.0 for a key.
++    short pitchMax = (short)(CONTROL_MAX_VAL * qs_cyber_pitch_scale + 0.5f);
++    short bankMax = (short)(CONTROL_MAX_VAL * qs_cyber_bank_scale + 0.5f);
++    if (pitchMax < 1)
++        pitchMax = 1;
++    if (bankMax < 1)
++        bankMax = 1;
++#else
++    short pitchMax = CONTROL_MAX_VAL;
++    short bankMax = CONTROL_MAX_VAL;
++#endif
++
+     while (MoveCyberKeybinds[i].code != 255) {
+         if (code == MoveCyberKeybinds[i].code) {
+             move = MoveCyberKeybinds[i].move;
+@@ -189,22 +209,22 @@
+ 
+     case M_CLIMB:
+         *cnum = CONTROL_YVEL;
+-        *cval = -CONTROL_MAX_VAL;
++        *cval = -pitchMax;
+         break;
+ 
+     case M_BANKLEFT:
+         *cnum = CONTROL_XYROT;
+-        *cval = -CONTROL_MAX_VAL;
++        *cval = -bankMax;
+         break;
+ 
+     case M_BANKRIGHT:
+         *cnum = CONTROL_XYROT;
+-        *cval = CONTROL_MAX_VAL;
++        *cval = bankMax;
+         break;
+ 
+     case M_DIVE:
+         *cnum = CONTROL_YVEL;
+-        *cval = CONTROL_MAX_VAL;
++        *cval = pitchMax;
+         break;
+ 
+     case M_ROLLRIGHT:
+@@ -219,38 +239,38 @@
+ 
+     case M_CLIMBLEFT:
+         *cnum = CONTROL_YVEL;
+-        *cval = -CONTROL_MAX_VAL;
++        *cval = -pitchMax;
+         if (abs(poll_controls[*cnum]) < abs(*cval))
+             poll_controls[*cnum] = *cval;
+         *cnum = CONTROL_XYROT;
+-        *cval = -CONTROL_MAX_VAL;
++        *cval = -bankMax;
+         break;
+ 
+     case M_CLIMBRIGHT:
+         *cnum = CONTROL_YVEL;
+-        *cval = -CONTROL_MAX_VAL;
++        *cval = -pitchMax;
+         if (abs(poll_controls[*cnum]) < abs(*cval))
+             poll_controls[*cnum] = *cval;
+         *cnum = CONTROL_XYROT;
+-        *cval = CONTROL_MAX_VAL;
++        *cval = bankMax;
+         break;
+ 
+     case M_DIVERIGHT:
+         *cnum = CONTROL_YVEL;
+-        *cval = CONTROL_MAX_VAL;
++        *cval = pitchMax;
+         if (abs(poll_controls[*cnum]) < abs(*cval))
+             poll_controls[*cnum] = *cval;
+         *cnum = CONTROL_XYROT;
+-        *cval = CONTROL_MAX_VAL;
++        *cval = bankMax;
+         break;
+ 
+     case M_DIVELEFT:
+         *cnum = CONTROL_YVEL;
+-        *cval = CONTROL_MAX_VAL;
++        *cval = pitchMax;
+         if (abs(poll_controls[*cnum]) < abs(*cval))
+             poll_controls[*cnum] = *cval;
+         *cnum = CONTROL_XYROT;
+-        *cval = -CONTROL_MAX_VAL;
++        *cval = -bankMax;
+         break;
+     default:
+         // Unhandled movement. What I gonna do?

android/engine-patches/26-android-cheat-refill.patch

@@ -0,0 +1,74 @@
+--- a/src/GameSrc/hkeyfunc.c
++++ b/src/GameSrc/hkeyfunc.c
+@@ -1465,3 +1465,71 @@
+ #pragma enable_message(202)
+ 
+ #endif // NOT_YET
++
++#ifdef __ANDROID__
++// Tops up parts of the player's state; android/app/src/main/cpp/qs_config.c
++// calls it once per frame with the "unlimited" cheats that are switched on.
++// `what` is a bitmask: 1 health, 2 energy, 4 ammo, 8 items (the same values as
++// QS_CHEAT_MASK_* in qs_config.c). Only conventional guns use ammo: beam and
++// melee weapons keep heat in the same field, so they are left alone (beams draw
++// on energy). Spare ammo clips, grenades and drugs are only refilled for kinds
++// the player already holds, so the cheat never creates items.
++void qs_cheat_refill(int what) {
++    const int kAmmoFloor = 99;
++    const int kItemFloor = 99;
++    uchar vitalsChanged = FALSE;
++    uchar inventoryChanged = FALSE;
++
++    if (player_struct.dead)
++        return;
++    if ((what & 1) && player_struct.hit_points < PLAYER_MAX_HP) {
++        player_struct.hit_points = PLAYER_MAX_HP;
++        vitalsChanged = TRUE;
++    }
++    if ((what & 1) && player_struct.cspace_hp < PLAYER_MAX_HP) {
++        player_struct.cspace_hp = PLAYER_MAX_HP;
++        vitalsChanged = TRUE;
++    }
++    if ((what & 2) && player_struct.energy < 255) {
++        player_struct.energy = 255;
++        vitalsChanged = TRUE;
++    }
++    if (vitalsChanged)
++        chg_set_flg(VITALS_UPDATE);
++
++    if (what & 4) {
++        for (int i = 0; i < NUM_WEAPON_SLOTS; i++) {
++            weapon_slot *slot = &player_struct.weapons[i];
++            if (slot->type != EMPTY_WEAPON_SLOT && slot->type <= GUN_SUBCLASS_SPECIAL &&
++                slot->ammo < kAmmoFloor) {
++                slot->ammo = kAmmoFloor;
++                inventoryChanged = TRUE;
++            }
++        }
++        for (int i = 0; i < NUM_AMMO_TYPES; i++) {
++            if (player_struct.cartridges[i] > 0 && player_struct.cartridges[i] < kItemFloor) {
++                player_struct.cartridges[i] = kItemFloor;
++                inventoryChanged = TRUE;
++            }
++        }
++    }
++    if (what & 8) {
++        for (int i = 0; i < NUM_GRENADEZ; i++) {
++            if (player_struct.grenades[i] > 0 && player_struct.grenades[i] < kItemFloor) {
++                player_struct.grenades[i] = kItemFloor;
++                inventoryChanged = TRUE;
++            }
++        }
++        for (int i = 0; i < NUM_DRUGZ; i++) {
++            if (player_struct.drugs[i] > 0 && player_struct.drugs[i] < kItemFloor) {
++                player_struct.drugs[i] = kItemFloor;
++                inventoryChanged = TRUE;
++            }
++        }
++    }
++    if (inventoryChanged) {
++        chg_set_flg(INVENTORY_UPDATE);
++        mfd_force_update();
++    }
++}
++#endif

android/force-rebuild.sh

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+# Forces a fully fresh native build - works around stageEngine sometimes
+# wrongly reporting UP-TO-DATE after android/engine-patches/ or
+# android/gl4es-patches/ changes (see gradle_stage_engine_stale_cache memory
+# note). Run from anywhere. Needs JAVA_HOME set to a JDK 17+; defaults to
+# Android Studio's bundled JDK if found.
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+cd "$SCRIPT_DIR"
+
+if [ -z "${JAVA_HOME:-}" ]; then
+    if [ -d /opt/android-studio/jbr ]; then
+        export JAVA_HOME=/opt/android-studio/jbr
+    else
+        echo "JAVA_HOME not set and no JDK found at /opt/android-studio/jbr - export it yourself" >&2
+        exit 1
+    fi
+fi
+
+./gradlew --stop
+rm -rf \
+    ../build/android-engine \
+    ../build/android-gl4es \
+    ../build/android-prebuilt \
+    app/.cxx \
+    app/build
+echo "Done - next Gradle build/Run will rebuild from scratch."

android/gradle/wrapper/gradle-wrapper.properties

@@ -1,6 +1,7 @@
-#Thu Nov 11 18:20:34 PST 2021
+#Sat Sep 05 16:12:16 CEST 2026
 distributionBase=GRADLE_USER_HOME
-distributionUrl=https\://services.gradle.org/distributions/gradle-8.1.1-bin.zip
 distributionPath=wrapper/dists
-zipStorePath=wrapper/dists
+distributionSha256Sum=544c35d6bd849ae8a5ed0bcea39ba677dc40f49df7d1835561582da2009b961d
+distributionUrl=https\://services.gradle.org/distributions/gradle-8.7-bin.zip
 zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists

build-image/Dockerfile

@@ -18,6 +18,13 @@ ARG FLUIDSYNTH_LITE_REF=c539a8d9270ba5a3f7d6e460606483fc2ab1eb61
 # Soundfont used for MIDI music, matching what engine/build_deps.sh itself
 # fetches (a free substitute for the Windows default GM soundfont).
 ARG SOUNDFONT_URL=http://rancid.kapsi.fi/windows.sf2
+# GLEW, for the Windows/MinGW cross-build only (engine/CMakeLists.txt's
+# WIN32 branch - Windows' own opengl32.dll only exposes OpenGL 1.1, so
+# anything newer needs GLEW's runtime extension loading; Linux instead
+# gets modern prototypes straight from Mesa's headers, no loader needed -
+# see engine/src/MacSrc/OpenGL.cc). Matches the version engine/'s own
+# upstream Windows build script (build_win64.sh) used.
+ARG GLEW_VERSION=2.1.0
 # Gitea/GitHub Actions' JS-based actions (actions/checkout,
 # actions/upload-artifact, ...) need a node binary in the container job's
 # PATH - this image is otherwise pure C toolchain, so it isn't pulled in
@@ -99,6 +106,15 @@ ENV DEBIAN_FRONTEND=noninteractive
 # openssh-client: the CI workflow's `sftp` publish step.
 # openjdk-17-jdk-headless: Gradle/AGP's own minimum JDK for the APK build.
 # unzip: extracts the Android cmdline-tools zip below.
+# mingw-w64: the x86_64-w64-mingw32-{gcc,g++,windres,ar,...} cross
+# toolchain for the Windows desktop build (see the "Windows cross-compile"
+# section below). Ubuntu ships both a win32-thread-model and a
+# posix-thread-model variant behind update-alternatives; the default
+# (win32) is fine here since nothing in engine/ uses std::thread.
+# zip: `make package-win`'s Windows release archive - a CI job's own
+# `make package` runs inside this image as its container (see
+# .gitea/workflows/build.yml), so it needs to be baked in here, not just
+# available on a local dev machine's own host (see README).
 #
 # All apt installs deliberately live in this one RUN, first, so editing
 # anything below it (in particular the Android cross-compile steps, the
@@ -111,7 +127,7 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
         libgl1-mesa-dev libglx-dev libxext-dev libx11-dev libxrandr-dev \
         libxi-dev libxfixes-dev libxss-dev libxinerama-dev libxcursor-dev \
         libogg-dev libvorbis-dev libasound2-dev openssh-client \
-        openjdk-17-jdk-headless unzip \
+        openjdk-17-jdk-headless unzip mingw-w64 zip \
     && rm -rf /var/lib/apt/lists/*
 
 WORKDIR /opt/prebuilt
@@ -150,10 +166,96 @@ RUN git clone https://github.com/EtherTyper/fluidsynth-lite.git \
     && rm -rf .git
 
 # General MIDI soundfont for fluidsynth playback - engine/build_deps.sh
-# fetches the same file and drops it into engine/res/.
+# fetches the same file and drops it into engine/res/. Shared by both the
+# Linux and Windows builds below.
 RUN mkdir -p soundfont \
     && curl -sSL -o soundfont/default.sf2 "${SOUNDFONT_URL}"
 
+# CMake toolchain file for the Windows/MinGW cross-build below, reused at
+# container-run time by build-image/build-engine-win.sh (see
+# MINGW_TOOLCHAIN_FILE) to cross-compile engine/ itself the same way. GCC's
+# runtime (libgcc/libstdc++) is linked statically so only the SDL2/
+# SDL2_mixer/GLEW/fluidsynth-lite DLLs (plus libwinpthread, which isn't
+# safe to static-link the same way) need shipping alongside systemshock.exe.
+ENV MINGW_TOOLCHAIN_FILE=/opt/mingw-toolchain.cmake
+RUN printf '%s\n' \
+        'set(CMAKE_SYSTEM_NAME Windows)' \
+        'set(CMAKE_SYSTEM_PROCESSOR x86_64)' \
+        'set(CMAKE_C_COMPILER x86_64-w64-mingw32-gcc)' \
+        'set(CMAKE_CXX_COMPILER x86_64-w64-mingw32-g++)' \
+        'set(CMAKE_RC_COMPILER x86_64-w64-mingw32-windres)' \
+        'set(CMAKE_FIND_ROOT_PATH /usr/x86_64-w64-mingw32)' \
+        '# LIBRARY/INCLUDE/PACKAGE deliberately left at CMake'"'"'s own' \
+        '# cross-compiling default (BOTH) - engine/CMakeLists.txt'"'"'s' \
+        '# BUNDLED SDL2/SDL2_mixer/FluidSynth find_library() calls point at' \
+        '# build_ext/ (outside this sysroot entirely), which ONLY would' \
+        '# refuse to search.' \
+        'set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)' \
+        'set(CMAKE_EXE_LINKER_FLAGS_INIT "-static-libgcc -static-libstdc++")' \
+        > "${MINGW_TOOLCHAIN_FILE}"
+
+# SDL2 and SDL2_mixer for Windows: unlike the desktop build above, these
+# are libsdl.org's own official prebuilt MinGW devel packages (headers +
+# import libs + DLLs for x86_64-w64-mingw32), not built from source here -
+# SDL2's autotools setup targets *nix; upstream ships MinGW builds
+# pre-made instead, same as engine/'s own upstream Windows build script
+# (build_win64.sh) uses. Same version pins as the Linux build above, so
+# both desktop builds ship the same SDL2/SDL2_mixer release.
+RUN curl -sSLO "https://www.libsdl.org/release/SDL2-devel-${SDL2_VERSION}-mingw.tar.gz" \
+    && tar xf "SDL2-devel-${SDL2_VERSION}-mingw.tar.gz" \
+    && mkdir -p /opt/prebuilt/win \
+    && mv "SDL2-${SDL2_VERSION}/x86_64-w64-mingw32" /opt/prebuilt/win/sdl2 \
+    && rm -rf "SDL2-${SDL2_VERSION}" "SDL2-devel-${SDL2_VERSION}-mingw.tar.gz"
+
+RUN curl -sSLO "https://www.libsdl.org/projects/SDL_mixer/release/SDL2_mixer-devel-${SDL2_MIXER_VERSION}-mingw.tar.gz" \
+    && tar xf "SDL2_mixer-devel-${SDL2_MIXER_VERSION}-mingw.tar.gz" --exclude=Xcode \
+    && mv "SDL2_mixer-${SDL2_MIXER_VERSION}/x86_64-w64-mingw32" /opt/prebuilt/win/sdl2_mixer \
+    && rm -rf "SDL2_mixer-${SDL2_MIXER_VERSION}" "SDL2_mixer-devel-${SDL2_MIXER_VERSION}-mingw.tar.gz"
+
+# GLEW for Windows: compiled directly instead of via GLEW's own bundled
+# cross-compile Makefile configs (config/Makefile.linux-mingw64 et al) -
+# those pass raw `-soname`/`--out-implib` straight to whatever $(LD) is
+# set to, which only works if LD is the real `ld` binary, not gcc-as-
+# linker-driver (and that config also hardcodes a 32-bit `i686-w64-
+# mingw32` host despite the "64" in its name) - simpler and more robust
+# to just compile+link GLEW's one source file ourselves. Produces
+# glew32.dll (to ship alongside systemshock.exe) and libglew32.dll.a (the
+# MinGW import library engine/CMakeLists.txt's WIN32 branch links
+# against).
+RUN curl -sSL -o "glew-${GLEW_VERSION}.tgz" \
+        "https://sourceforge.net/projects/glew/files/glew/${GLEW_VERSION}/glew-${GLEW_VERSION}.tgz/download" \
+    && tar xf "glew-${GLEW_VERSION}.tgz" \
+    && cd "glew-${GLEW_VERSION}" \
+    && mkdir -p /opt/prebuilt/win/glew/include/GL /opt/prebuilt/win/glew/lib \
+    && x86_64-w64-mingw32-gcc -DGLEW_NO_GLU -O2 -Iinclude -c src/glew.c -o glew.o \
+    && x86_64-w64-mingw32-gcc -shared \
+        -Wl,--out-implib,/opt/prebuilt/win/glew/lib/libglew32.dll.a \
+        -o /opt/prebuilt/win/glew/lib/glew32.dll \
+        glew.o -lopengl32 -lgdi32 -luser32 -lkernel32 \
+    && cp include/GL/glew.h include/GL/wglew.h /opt/prebuilt/win/glew/include/GL/ \
+    && cd .. && rm -rf "glew-${GLEW_VERSION}" "glew-${GLEW_VERSION}.tgz"
+
+# fluidsynth-lite for Windows: same source/ref/DLL-mode patch as the
+# desktop build above, cross-compiled via the MinGW toolchain file. WIN32
+# skips fluidsynth-lite's own pthread dependency (see its CMakeLists.txt),
+# so no libwinpthread linkage to worry about here.
+RUN git clone https://github.com/EtherTyper/fluidsynth-lite.git fluidsynth-lite-win \
+    && cd fluidsynth-lite-win \
+    && git checkout "${FLUIDSYNTH_LITE_REF}" \
+    && sed -i 's/DLL"\ off/DLL"\ on/' CMakeLists.txt \
+    && rm -rf .git \
+    && cd .. \
+    && cmake -S fluidsynth-lite-win -B build-fluidsynth-win \
+        -DCMAKE_TOOLCHAIN_FILE="${MINGW_TOOLCHAIN_FILE}" \
+    && cmake --build build-fluidsynth-win -j"$(nproc)" \
+    && mkdir -p /opt/prebuilt/win/fluidsynth-lite/lib /opt/prebuilt/win/fluidsynth-lite/include \
+    && cp build-fluidsynth-win/src/*.dll build-fluidsynth-win/src/*.dll.a \
+        /opt/prebuilt/win/fluidsynth-lite/lib/ \
+    && cp -a fluidsynth-lite-win/include/. /opt/prebuilt/win/fluidsynth-lite/include/ \
+    && cp build-fluidsynth-win/include/fluidsynth/version.h \
+        /opt/prebuilt/win/fluidsynth-lite/include/fluidsynth/version.h \
+    && rm -rf fluidsynth-lite-win build-fluidsynth-win
+
 # Node.js: needed only so Gitea/GitHub Actions' JS-based actions can run
 # when this image is used as a CI job's container - see NODE_VERSION above.
 RUN curl -sSL -o /tmp/node.tar.xz \
@@ -283,7 +385,15 @@ RUN git clone --branch "release-${ANDROID_OPENXR_VERSION}" --depth 1 \
 
 COPY build-image/docker-entrypoint.sh /usr/local/bin/docker-entrypoint.sh
 COPY build-image/build-engine.sh /usr/local/bin/build-engine.sh
-RUN chmod +x /usr/local/bin/docker-entrypoint.sh /usr/local/bin/build-engine.sh
+# 755, not +x: the entrypoint drops to a `builder` user matching the
+# *host's* UID/GID (see docker-entrypoint.sh), which is never in these
+# root-owned files' group, so it needs the image's own explicit
+# world-read+execute here - `chmod +x` alone only adds execute bits on
+# top of whatever "other" permissions the source file happened to have
+# (which depends on the host's umask at checkout, e.g. a restrictive
+# 0007 umask yields unreadable-by-other files, which then round-trip
+# into the image and cause a Permission denied at container run time).
+RUN chmod 755 /usr/local/bin/docker-entrypoint.sh /usr/local/bin/build-engine.sh
 
 # Marks a shell as already running inside this image (with every engine
 # build dependency prebuilt above) - lets the Makefile's `engine` target

build-image/build-engine-win.sh

@@ -0,0 +1,106 @@
+#!/usr/bin/env bash
+# Cross-compiles engine/ (the vendored Shockolate snapshot) for Windows
+# (x86_64) via MinGW, against the dependencies prebuilt into this image at
+# /opt/prebuilt/win - no network access needed. engine/CMakeLists.txt
+# already has working WIN32/MINGW branches (the upstream Shockolate
+# project's own build_win64.sh/appveyor.yml build the same way, natively
+# on Windows via Git Bash/MinGW; this cross-compiles the same branches
+# fully offline and reproducibly from Linux instead), so no source
+# patching is needed, unlike the Quest build's android/engine-patches/.
+#
+# Builds from a scratch copy of engine/ (like android/engine-patches/
+# does for the Quest build) rather than engine/ itself: its BUNDLED
+# dependency paths (build_ext/built_sdl etc.) and in-source CMake cache
+# are relative to/inside the source tree, and would otherwise collide
+# with the Linux desktop build's own build_ext/CMakeCache.txt (see
+# build-engine.sh) if both are built from the same checkout, as `make
+# dist` (dist-linux + dist-win) does.
+#
+# Must be run with the repo root as the working directory - either via
+# ../run-image.sh, or directly when already inside this image (see the
+# Makefile's `engine-win` target, which picks whichever of these
+# applies, same as `engine`).
+#
+# Output lands in engine/.build-output-win/: systemshock.exe, the DLLs
+# it needs at runtime, and a default MIDI soundfont - everything the
+# root Makefile needs to assemble dist-win/.
+set -euo pipefail
+
+REPO_ROOT="$(pwd)"
+SCRATCH_ENGINE="$REPO_ROOT/build/win-engine"
+OUT_DIR="$REPO_ROOT/engine/.build-output-win"
+
+echo "== Preparing a scratch copy of engine/ for the Windows cross-build =="
+rm -rf "$SCRATCH_ENGINE"
+mkdir -p "$(dirname "$SCRATCH_ENGINE")"
+
+# See build-engine.sh for why this detection is needed (e.g. a VirtualBox
+# vboxsf shared folder refusing to create symlinks or preserve hard-link
+# relationships) - applied here too since build/ is under the same
+# bind-mounted repo checkout.
+CP_FLAGS=(-a)
+mkdir -p "$(dirname "$SCRATCH_ENGINE")/.symlink-test-dir"
+if ! ln -s test-target "$(dirname "$SCRATCH_ENGINE")/.symlink-test-dir/test" 2>/dev/null; then
+    echo "(destination filesystem doesn't support symlinks - copying real file content instead)"
+    CP_FLAGS=(-a --dereference --no-preserve=links)
+fi
+rm -rf "$(dirname "$SCRATCH_ENGINE")/.symlink-test-dir"
+
+cp "${CP_FLAGS[@]}" "$REPO_ROOT/engine" "$SCRATCH_ENGINE"
+cd "$SCRATCH_ENGINE"
+
+# If engine/ has ever been built in-source directly (`make dist`/`make
+# engine` - see build-engine.sh), that leftover CMakeCache.txt etc. just
+# got copied along verbatim - and it still points at the real engine/
+# path, not this scratch copy, which CMake refuses to configure against
+# ("directory is different than the directory where CMakeCache.txt was
+# created"). Same artifact list as .gitignore's "Engine build artifacts"
+# section.
+rm -rf build_ext CMakeCache.txt CMakeFiles cmake_install.cmake Makefile \
+    systemshock src/Libraries/CMakeFiles
+
+echo "== Wiring up prebuilt SDL2/SDL2_mixer/GLEW/fluidsynth-lite (Windows/MinGW) from the image =="
+rm -rf build_ext
+mkdir -p build_ext
+cp "${CP_FLAGS[@]}" /opt/prebuilt/win/sdl2 build_ext/built_sdl
+cp "${CP_FLAGS[@]}" /opt/prebuilt/win/sdl2_mixer build_ext/built_sdl_mixer
+cp "${CP_FLAGS[@]}" /opt/prebuilt/win/glew build_ext/built_glew
+# engine/CMakeLists.txt's BUNDLED FluidSynth mode hardcodes
+# build_ext/fluidsynth-lite/src as the library search path (matching the
+# desktop Linux in-source build's own output layout) - same lib/ -> src/
+# remapping build-image/prepare-android-project.sh does for the Quest
+# build's own prebuilt fluidsynth-lite.
+mkdir -p build_ext/fluidsynth-lite/src build_ext/fluidsynth-lite/include
+cp "${CP_FLAGS[@]}" /opt/prebuilt/win/fluidsynth-lite/lib/. build_ext/fluidsynth-lite/src/
+cp "${CP_FLAGS[@]}" /opt/prebuilt/win/fluidsynth-lite/include/. build_ext/fluidsynth-lite/include/
+
+echo "== Configuring (CMake, MinGW cross-compile, BUNDLED SDL2/SDL2_mixer/FluidSynth) =="
+cmake -DCMAKE_TOOLCHAIN_FILE="$MINGW_TOOLCHAIN_FILE" \
+    -DENABLE_SDL2=BUNDLED -DENABLE_SOUND=BUNDLED -DENABLE_FLUIDSYNTH=BUNDLED .
+
+echo "== Compiling =="
+make -j"$(nproc)" systemshock
+
+echo "== Assembling engine/.build-output-win =="
+rm -rf "$OUT_DIR"
+mkdir -p "$OUT_DIR"
+cp systemshock.exe "$OUT_DIR/"
+# Only SDL2.dll/SDL2_mixer.dll themselves - not SDL2_mixer's own bundled
+# codec DLLs (libvorbis, libmodplug, libopus, ...), matching what
+# engine/'s own upstream Windows build script (build_win64.sh) ships:
+# Shockolate only ever calls Mix_LoadWAV_RW/Mix_HookMusic (same as the
+# Quest build - see build-image/Dockerfile's Android layer comment),
+# never loading the OGG/MOD/MP3 game data those codecs would be for.
+cp build_ext/built_sdl/bin/SDL2.dll build_ext/built_sdl_mixer/bin/SDL2_mixer.dll "$OUT_DIR/"
+cp build_ext/built_glew/lib/glew32.dll "$OUT_DIR/"
+cp build_ext/fluidsynth-lite/src/*.dll "$OUT_DIR/"
+# libgcc/libstdc++ are statically linked (see the Dockerfile's
+# MINGW_TOOLCHAIN_FILE), but fluidsynth-lite/SDL2 still pull in the
+# MinGW pthread emulation dynamically.
+cp /usr/x86_64-w64-mingw32/lib/libwinpthread-1.dll "$OUT_DIR/"
+cp /opt/prebuilt/soundfont/default.sf2 "$OUT_DIR/soundfont.sf2"
+
+echo "== Done =="
+echo "Binary:     $OUT_DIR/systemshock.exe"
+echo "DLLs:       $OUT_DIR/*.dll"
+echo "Soundfont:  $OUT_DIR/soundfont.sf2"

build-image/build-engine.sh

@@ -22,9 +22,28 @@ cd "$ENGINE_DIR"
 echo "== Wiring up prebuilt SDL2/SDL2_mixer/fluidsynth-lite from the image =="
 rm -rf build_ext
 mkdir -p build_ext
-cp -a /opt/prebuilt/built_sdl build_ext/
-cp -a /opt/prebuilt/built_sdl_mixer build_ext/
-cp -a /opt/prebuilt/fluidsynth-lite build_ext/
+
+# Some filesystems the repo might be checked out on (e.g. a VirtualBox
+# vboxsf shared folder) refuse to create symlinks at all ("Operation not
+# permitted"), which plain `cp -a` needs for SDL2/SDL2_mixer's
+# libFoo.so -> libFoo.so.N -> libFoo.so.N.M dev-symlink chain. Detect
+# that up front, once, and copy real file content instead of recreating
+# links if so, rather than failing partway through. `-a` implies
+# --preserve=all (which includes hard-link relationships between files,
+# not just symlinks - SDL2's install hard-links the two most-specific
+# version files together), so --no-preserve=links is needed alongside
+# --dereference to avoid that too.
+CP_FLAGS=(-a)
+if ! ln -s test-target build_ext/.symlink-test 2>/dev/null; then
+    echo "(destination filesystem doesn't support symlinks - copying real file content instead)"
+    CP_FLAGS=(-a --dereference --no-preserve=links)
+else
+    rm -f build_ext/.symlink-test
+fi
+
+cp "${CP_FLAGS[@]}" /opt/prebuilt/built_sdl build_ext/
+cp "${CP_FLAGS[@]}" /opt/prebuilt/built_sdl_mixer build_ext/
+cp "${CP_FLAGS[@]}" /opt/prebuilt/fluidsynth-lite build_ext/
 
 echo "== Configuring (CMake, BUNDLED SDL2/SDL2_mixer/FluidSynth) =="
 rm -f CMakeCache.txt
@@ -38,7 +57,7 @@ rm -rf "$OUT_DIR"
 mkdir -p "$OUT_DIR/lib"
 cp systemshock "$OUT_DIR/"
 find build_ext/built_sdl/lib build_ext/built_sdl_mixer/lib build_ext/fluidsynth-lite/src \
-    -name '*.so*' -not -name '*.la' -exec cp -a {} "$OUT_DIR/lib/" \;
+    -name '*.so*' -not -name '*.la' -exec cp "${CP_FLAGS[@]}" {} "$OUT_DIR/lib/" \;
 cp /opt/prebuilt/soundfont/default.sf2 "$OUT_DIR/soundfont.sf2"
 
 echo "== Done =="

build-image/docker-entrypoint.sh

@@ -11,4 +11,17 @@ USER_GID="${HOST_GID:-1000}"
 groupadd -g "$USER_GID" builder 2>/dev/null || true
 useradd -u "$USER_UID" -g "$USER_GID" -m -s /bin/bash builder 2>/dev/null || true
 
+# /workspace (the bind-mounted repo) may actually be owned by a group the
+# host user only has via *supplementary* membership rather than their
+# primary GID above - e.g. a VirtualBox vboxsf shared folder, which shows
+# up as root:vboxsf on the host and would otherwise be inaccessible to
+# `builder` here (falls through to "other", which vboxsf's default mode
+# leaves with no permissions at all). Join whatever group actually owns
+# /workspace too, if it differs.
+WORKSPACE_GID="$(stat -c %g /workspace 2>/dev/null || true)"
+if [ -n "$WORKSPACE_GID" ] && [ "$WORKSPACE_GID" != "$USER_GID" ]; then
+    groupadd -g "$WORKSPACE_GID" workspace 2>/dev/null || true
+    usermod -aG "$WORKSPACE_GID" builder 2>/dev/null || true
+fi
+
 exec gosu builder "$@"

build-image/prepare-android-project.sh

@@ -81,7 +81,7 @@ fi
     echo "prebuiltDir=$PREBUILT_DIR_PROP"
 } > "$ANDROID_DIR/engine.properties"
 
-echo "== Staging bundled assets (shaders, soundfont, get-assets text) =="
+echo "== Staging bundled assets (shaders, soundfont, get-assets text, default config) =="
 ASSETS_DIR="$ANDROID_DIR/app/src/main/assets"
 rm -rf "$ASSETS_DIR"
 mkdir -p "$ASSETS_DIR/shaders" "$ASSETS_DIR/res"
@@ -91,6 +91,8 @@ mkdir -p "$ASSETS_DIR/shaders" "$ASSETS_DIR/res"
 cp -a "$ANDROID_DIR/gles-shaders/." "$ASSETS_DIR/shaders/"
 cp "/opt/prebuilt/soundfont/default.sf2" "$ASSETS_DIR/res/soundfont.sf2"
 cp "$REPO_ROOT/res/assets/GET_ASSETS_QUEST.txt" "$ASSETS_DIR/GET_ASSETS_QUEST.txt"
+cp "$REPO_ROOT/res/questshock.config.default.json" "$ASSETS_DIR/questshock.config.default.json"
+cp -a "$REPO_ROOT/res/controller_profiles" "$ASSETS_DIR/controller_profiles"
 
 echo "== Staging prebuilt Android SDL2/SDL2_mixer/fluidsynth-lite/openxr .so's into jniLibs =="
 # gl4es is deliberately absent here - it's no longer prebuilt, it's compiled

res/assets/extract_assets.sh

@@ -13,10 +13,23 @@
 # inside it in sshock.kpf, which is just a zip file. Its res/pc/hd/ and
 # res/pc/cdrom/ trees together hold every classic-game data/sound file
 # Shockolate's res/ folder expects (res/pc/hd wins the couple of
-# filenames present in both: intro.res, objprop.dat). Needs innoextract
-# and unzip; if they're not installed locally, this script does the
-# extraction inside a throwaway Ubuntu container instead (needs docker in
-# that case, nothing else).
+# filenames present in both: intro.res, objprop.dat), EXCEPT
+# mfdfrn.res/mfdger.res (French/German MFD art - see CONFIG.md/README.md),
+# which that installer doesn't include at all - see "Optional: French/
+# German MFD art" below for where those instead come from. Needs
+# innoextract and unzip; if they're not installed locally, this script
+# does the extraction inside a throwaway Ubuntu container instead (needs
+# docker in that case, nothing else).
+#
+# Optional: French/German MFD art
+#   The Enhanced Edition installer's data set doesn't include
+#   mfdfrn.res/mfdger.res, so French/German are otherwise missing their
+#   MFD (Multi-Function Display) art and the game refuses to switch to
+#   them (see CONFIG.md). System Shock: Classic (also gog.com) does
+#   include both files. If you also own it, drop its offline installer
+#   (e.g. setup_system_shock_classic_2.0.0.3.exe) in this directory too -
+#   entirely optional, this script still runs fine without it - and this
+#   script pulls just those two files out of it into ss_ee/data/ as well.
 set -euo pipefail
 
 cd "$(dirname "${BASH_SOURCE[0]}")"
@@ -27,6 +40,7 @@ fail() { echo "PREFLIGHT FAIL: $*" >&2; exit 1; }
 
 shopt -s nullglob
 installers=(setup_system_shock_enhanced_edition*.exe)
+classic_installers=(setup_system_shock_classic*.exe)
 shopt -u nullglob
 case "${#installers[@]}" in
     0) fail "no setup_system_shock_enhanced_edition*.exe found in $ASSETS_DIR - buy System Shock: Enhanced Edition on gog.com, download the offline installer, and drop it here" ;;
@@ -35,6 +49,15 @@ case "${#installers[@]}" in
 esac
 INSTALLER="${installers[0]}"
 
+# Optional - see "Optional: French/German MFD art" above. Empty (not
+# missing/failed) when absent; only a genuine ambiguity (more than one
+# candidate file) is a hard failure.
+case "${#classic_installers[@]}" in
+    0) CLASSIC_INSTALLER="" ;;
+    1) CLASSIC_INSTALLER="${classic_installers[0]}" ;;
+    *) fail "multiple setup_system_shock_classic*.exe files found in $ASSETS_DIR - keep only one: ${classic_installers[*]}" ;;
+esac
+
 # Extracts sshock.kpf from $1 (an installer .exe) and assembles $2 (an
 # ss_ee output directory) from its res/pc/{hd,cdrom} trees. Defined as a
 # function so the exact same logic can run either natively or, via
@@ -69,9 +92,38 @@ run_extraction() {
     cp -a "$work/kpf/res/pc/hd/sound/." "$out_dir/sound/"
 }
 
+# Extracts mfdfrn.res/mfdger.res from $1 (a System Shock: Classic installer
+# .exe) into $2 (an existing ss_ee output directory's data/ subfolder) -
+# see "Optional: French/German MFD art" above. Unlike the Enhanced Edition
+# installer, Classic's data files sit directly in the Inno Setup package
+# (no intermediate zip), so this is just a targeted innoextract --include,
+# no unzip step needed. Same declare -f-into-docker structure as
+# run_extraction() above.
+run_classic_mfd_extraction() {
+    set -euo pipefail
+    local installer="$1" out_dir="$2"
+    work="$(mktemp -d)"
+    trap 'rm -rf "${work:-}"' EXIT
+
+    echo "== Extracting mfdfrn.res/mfdger.res from classic installer =="
+    innoextract --silent \
+        --include 'app/SSHOCK/DATA/MFDFRN.RES' --include 'app/SSHOCK/DATA/MFDGER.RES' \
+        -d "$work/classic" "$installer"
+
+    # Original DOS-era filenames are uppercase; Shockolate's resource
+    # loader expects the lowercase names already used for every other
+    # res/data/*.res file (case-sensitive on Linux, unlike the DOS/Windows
+    # filesystems these came from).
+    cp "$work/classic/app/SSHOCK/DATA/MFDFRN.RES" "$out_dir/data/mfdfrn.res"
+    cp "$work/classic/app/SSHOCK/DATA/MFDGER.RES" "$out_dir/data/mfdger.res"
+}
+
 if command -v innoextract >/dev/null 2>&1 && command -v unzip >/dev/null 2>&1; then
     echo "== Using local innoextract/unzip =="
     run_extraction "$ASSETS_DIR/$INSTALLER" "$OUT_DIR"
+    if [ -n "$CLASSIC_INSTALLER" ]; then
+        run_classic_mfd_extraction "$ASSETS_DIR/$CLASSIC_INSTALLER" "$OUT_DIR"
+    fi
 else
     echo "== innoextract/unzip not found locally - using a throwaway docker container =="
     command -v docker >/dev/null 2>&1 \
@@ -86,12 +138,18 @@ else
             apt-get update -qq >/dev/null
             apt-get install -y -qq innoextract unzip >/dev/null
             $(declare -f run_extraction)
+            $(declare -f run_classic_mfd_extraction)
             run_extraction '/assets/$INSTALLER' '/assets/ss_ee'
+            $([ -n "$CLASSIC_INSTALLER" ] && echo "run_classic_mfd_extraction '/assets/$CLASSIC_INSTALLER' '/assets/ss_ee'")
             chown -R \"\$HOST_UID:\$HOST_GID\" /assets/ss_ee
         "
 fi
 
 echo "== Done =="
 echo "Assets extracted to $OUT_DIR"
-echo "Note: mfdfrn.res/mfdger.res (French/German MFD art) are not present in this"
-echo "installer and are only needed for those localizations - not for English play."
+if [ -n "$CLASSIC_INSTALLER" ]; then
+    echo "Also extracted mfdfrn.res/mfdger.res (French/German MFD art) from $CLASSIC_INSTALLER."
+else
+    echo "Note: mfdfrn.res/mfdger.res (French/German MFD art) are not present - only needed for"
+    echo "French/German (see CONFIG.md); drop a System Shock: Classic installer here too to get them."
+fi

res/controller_profiles/generic.json

@@ -0,0 +1,9 @@
+{
+  "name": "Generic OpenXR Controller",
+  "interaction_profile": "/interaction_profiles/khr/simple_controller",
+  "image": "generic.png",
+  "controls": [
+    {"id": "left_trigger", "label": "Select (Left)", "anchor_x": 0.30, "anchor_y": 0.60},
+    {"id": "right_trigger", "label": "Select (Right)", "anchor_x": 0.30, "anchor_y": 0.60}
+  ]
+}

res/controller_profiles/touch.json

@@ -0,0 +1,19 @@
+{
+  "name": "Meta Quest Touch",
+  "interaction_profile": "/interaction_profiles/oculus/touch_controller",
+  "image": "touch.png",
+  "controls": [
+    {"id": "left_trigger", "label": "Trigger", "anchor_x": 0.30, "anchor_y": 0.45},
+    {"id": "right_trigger", "label": "Trigger", "anchor_x": 0.72, "anchor_y": 0.45},
+    {"id": "left_squeeze", "label": "Grip", "anchor_x": 0.12, "anchor_y": 0.55},
+    {"id": "right_squeeze", "label": "Grip", "anchor_x": 0.58, "anchor_y": 0.55},
+    {"id": "left_x", "label": "X", "anchor_x": 0.14, "anchor_y": 0.33},
+    {"id": "left_y", "label": "Y", "anchor_x": 0.24, "anchor_y": 0.35},
+    {"id": "right_a", "label": "A", "anchor_x": 0.68, "anchor_y": 0.35},
+    {"id": "right_b", "label": "B", "anchor_x": 0.75, "anchor_y": 0.33},
+    {"id": "left_thumbstick", "label": "Thumbstick", "anchor_x": 0.20, "anchor_y": 0.28},
+    {"id": "right_thumbstick", "label": "Thumbstick", "anchor_x": 0.62, "anchor_y": 0.30},
+    {"id": "left_thumbstick_click", "label": "Thumbstick Click", "anchor_x": 0.20, "anchor_y": 0.28},
+    {"id": "right_thumbstick_click", "label": "Thumbstick Click", "anchor_x": 0.62, "anchor_y": 0.30}
+  ]
+}

res/controller_profiles/vive.json

@@ -0,0 +1,15 @@
+{
+  "name": "HTC Vive Wand",
+  "interaction_profile": "/interaction_profiles/htc/vive_controller",
+  "image": "vive.png",
+  "controls": [
+    {"id": "left_trigger", "label": "Trigger", "anchor_x": 0.13, "anchor_y": 0.62},
+    {"id": "right_trigger", "label": "Trigger", "anchor_x": 0.78, "anchor_y": 0.62},
+    {"id": "left_squeeze", "label": "Grip", "anchor_x": 0.08, "anchor_y": 0.68},
+    {"id": "right_squeeze", "label": "Grip", "anchor_x": 0.85, "anchor_y": 0.68},
+    {"id": "left_thumbstick", "label": "Trackpad", "anchor_x": 0.20, "anchor_y": 0.42},
+    {"id": "right_thumbstick", "label": "Trackpad", "anchor_x": 0.72, "anchor_y": 0.42},
+    {"id": "left_thumbstick_click", "label": "Trackpad Click", "anchor_x": 0.20, "anchor_y": 0.42},
+    {"id": "right_thumbstick_click", "label": "Trackpad Click", "anchor_x": 0.72, "anchor_y": 0.42}
+  ]
+}

res/questshock.config.default.json

@@ -0,0 +1,17 @@
+{
+  "video_options": {
+    "renderer": "opengl",
+    "resolution": "1024x768",
+    "initial_screen_width_m": 1.600000,
+    "initial_screen_distance_m": 2.000000,
+    "game_screen_width_m": 3.400000,
+    "game_screen_distance_m": 2.000000,
+    "screen_width_offset_m": 1.000000,
+    "screen_width_step_m": 0.600000,
+    "screen_distance_offset_m": 1.000000,
+    "screen_distance_step_m": 0.500000
+  },
+  "general": {
+    "language": "english"
+  }
+}

res/run.bat

@@ -0,0 +1,4 @@
+@echo off
+cd /d "%~dp0"
+systemshock.exe %*
+exit /b %errorlevel%